Search results
1451
Case study
Catheter cap removal torque
Customised engineering example
Our client was testing the release torque of 20 mm long plastic catheter caps with irregular features to aid finger gripping.
1452
[Page extract]
BS EN 1393
BS EN 1393 specifies a test method for testing the longitudinal tensile properties of glass-reinforced thermosetting plastics (GRP) pipes.
1453
[Page extract]
ISO 13935-1
ISO 13935-1:2014 specifies a procedure to determine the seam maximum force of sewn seams when the force is applied perpendicularly to the seam. ISO 13935-1:2014 specifies the method known as the strip test.
1454
[Page extract]
ASTM D885/D885M-10a
These [comprehensive] test methods cover the testing of industrial filament yarns made wholly of manufactured organic-base fibers, cords twisted from such yarns, fabrics woven from such cords, and products that are made specifically for use in the manuf
1455
[Page extract]
BS EN ISO 205
Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints.
1456
Event
T-Peel (Adhesion Strength) Testing
This webinar will focus on the most common approach to measuring the adhesion strength of two materials bonded together with an adherent.
1457
[Page extract]
Evaluating mechanical properties
Flexural tests yield valuable data on strength, stiffness, and toughness. By examining stress-strain curves from flexural tests, engineers can assess:
1458
[Page extract]
ASTM D7257-06
This test method of applying force may be used as a standard test to compare the characteristics of a given design of container/child-resistant closure system with a standard or to compare the characteristics of container/child resistant closure systems
1459
Case study
Yakıt enjeksiyon bileşenleri üzerinde bağlantı testi
gereklilik Yakıt enjeksiyon düzeneğinde kullanılan plastik bir düzenek üzerinde bir dizi yıkıcı ve tahribatsız test gerekliydi. Testler şunları içeriyordu:
1460
[Page extract]
CETIE Guide 12
This guide describes the five essential rules to be observed to properly crimp a pump with an aluminium ferrule on an FEA type glass finish used for perfumery, according to the EN 14854 standard and the Cetie document GME 40.05.
1461
[Page extract]
TAPPI T 826
This method describes a procedure for determining the compressive resistance of containerboard. This method is intended for containerboard having a span-to-thickness ratio of 5 or less.
1462
[Page extract]
ASTM D3164
Test method ASTM D3164 is used to produce shear strength data for joints to compare adhesives or evaluation surface treatments. Shear joints impose uniform stresses across the bond area which results in the highest possible joint strength.
1463
Case study
Flip-cap kuvvet testi
gereklilik Minimum kapak değişimi ile 3 farklı çaplı kapak barındıran, kapaklı kapakların açılma kuvvetini kontrol etmek için tekrarlanabilir bir test sistemi.
1464
[Page extract]
BS EN 13393
This European Standards specifies the dimesinsions and physical properties od a range of edge protectors which are used in conjunction wuth tensional strapping
1465
[Page extract]
ASTM D3931
This test method covers the determination of comparative shear properties of gap-filling adhesives in wood-to-wood joints at specified thicknesses of bondline in the dry condition, when tested on standard specimens under specified conditions of preparat
1466
Event
Essentials of Adhesion (Peel) Testing
There is a reason people reach for Duct Tape as a fix for almost everything – Adhesion Strength. From busted pipes to ripped furniture, the preference for a solution that “does not easily peel off” is the guiding principle for manufactures.
1467
[Page extract]
ISO 9073-18
ISO 9073-18:2007 specifies a grab tensile test procedure for determining the breaking strength and elongation of most nonwoven materials. It includes instructions for the testing of wet specimens.
1468
[Page extract]
ASTM D1623
ASTM D1623 determines the tensile and tensile adhesion properties of rigid cellular plastics materials and foam. These are often used as insulation and structural materials in the aerospace, automotive and construction industries.
1469
[Page extract]
Destek
Satış, mühendislik ve teknik destek ekiplerimiz en üst düzeyde müşteri hizmeti sunmayı taahhüt eder. Mecmesin, tüm ürünlerimiz için uygulama ve teknik destek sağlamaktadır.
1470
[Page extract]
ASTM D6713-14
Materials shall be tested and the individual grades shall conform to specified values of the physical properties such as tensile strength, tensile elongation, tensile modulus, dimensional stability, flexural modulus, and Izod impact; and dimensional pro
1471
Page
Missing link
The page you requested wasn't found on this site. It could have moved or something has gone wrong.
1472
[Page extract]
ASTM D4476 / D4476M-14
ASTM D4476 is a test method used to determine the flexural properties of fiber-reinforced pultruded plastic rods. The specimen used is a rod with a semi-circular cross section, moulded or cut from lengths of pultruded rods.
1473
Case study
Sıralı solunum filtresi çekme testi
Özel mühendislik örneği Bir sıralı tıbbi cihazdan çekildiğinde bir solunum filtresinin çıkarma kuvvetini test etmek için gerekli bir filtrasyon ürünleri üreticisi.
1474
Case study
Alçıpan içine yarı otomatik penetrasyon testi
Özel mühendislik örneği İngiliz Alçı (şimdi Saint-Gobain) ürünlerinin performansını ve dayanıklılığını doğru bir şekilde değerlendirmek için tekrarlayan penetrasyon testleri gerçekleştirmektedir.
1475
[Page extract]
ASTM D2633
ASTM D2633 test methods cover procedures for the testing of thermoplastic insulations and jackets used on insulated wire and cable.