Search results
1326
Event
Essentials of Grip & Fixture Selection
The accuracy of instrument itself- though important, is only one piece of the measurement accuracy puzzle. Grip and fixture selection plays a critical role in the applications in Force and Materials quality testing.
1327
Case study
Araba kapısı kapatma çabası
gereklilik Araba kapılarını kapatırken, kullanıcıların hareketi başlatmak ve tamamen kapanmasını sağlamak için belirli bir kuvvet uygulamalıdır.
1328
[Page extract]
BS EN 12568
Protective footwear, Protective clothing, Toe-caps, Metals, Non-metals, Impact strength, Performance testing, Dimensions, Length, Impact testing, Compression testing, Penetration tests, Corrosion resistance, Corrosion tests, Bend testing, Marking, Test
1329
Case study
Plastic film tension test
Requirement
The customer uses a double layer plastic film for packaging film for packaging of pet food and confectionary.
1330
[Page extract]
ASTM D790-17
ASTM D790 is used to determine the flexural properties of unreinforced and reinforced plastics, including high modulus composites and electrical insulating materials utilizing a three-point loading system to apply a load to a simply supported beam (spec
1331
[Page extract]
ASTM D5635-11
An important factor affecting the performance of membrane roofing systems is their ability to resist dynamic puncture loads. This test method provides a means to assess dynamic puncture resistance.
1332
[Page extract]
ASTM D5467 / D5467M-97
ASTM D5467 is a test method that determines the in-plane compressive properties of polymer matrix composite materials reinforced by high-modulus fibers in a sandwich beam configuration.
1333
Case study
ISBT spor şapkası dönme testi
gereklilik Uluslararası İçecek Teknolojisi Uzmanları Derneği (ISBT) alkolsüz içeceklerin ve içeceklerin teknik ve bilimsel yönleri için gönüllü uygulama kodları yayınlamaktadır.
1334
[Page extract]
BS 6965-1
Cartons, Board (paper), Paper products, Crease-recovery tests, Creasing tests, Folding, Test equipment, Specimen preparation, Testing conditions, Reproducibility, Containers, Blanks, Stiffness, Boxboard
1335
Case study
Kozmetik fırça çekme testi
Özel mühendislik örneği Müşterimiz, tüm uygulamalar için çeşitli fırçalar kullanan ve kılların bütünlüğünü çekme testini yapmak isteyen büyük bir kozmetik şirketidir.
1336
[Page extract]
ISO 11897
ISO 11897 specifies a method for the determination, under given conditions, of the resistance to tear propagation on an edge fold of sacks made from thermoplastic flexible film.
1337
Case study
Çocuklara dayanıklı kapaklar (CRC) mandreli
Özel mühendislik örneği Çocuk Korumalı Kapaklar (CRC), tork uygulanmadan önce CR kilitleme mekanizmasını etkinleştirmek için yeterli dikey kuvvet gerektirir.
1338
Case study
Cosmetics tube flip-cap attachment strength
Customised engineering example
Many flip-caps on flat-sealed cosmetics tubes are not designed for removal by the consumer under normal use.
1339
[Page extract]
SAE J1701M
This SAE Information Report is provided as an advisory guide. Individual application discretion is recommended. The content has been presented as accurately as possible, but responsibility for its application lies with the user.
1340
[Page extract]
ASTM D2148
ASTM D2148 is a test standard that for testing bondable silicone rubber tapes, which form a sealed structure either with the application of heat (and pressure if needed) or by the process of auto-adhesion (self-fusing).
1341
[Page extract]
ISO 527-4
ISO 527-4 determines the tensile properties of isotropic and orthotropic fibre reinforced plastic composite sheeting and film including the tensile strength and modulus of elasticity, strain, elongation and the tensile energy to break (TEB).
1342
[Page extract]
FINAT FTM3
This test method allows the end user to determine the force required to separate the release backing from the pressure sensitive adhesive coated face material.
1343
[Page extract]
ASTM D3489
ASTM D3489 test methods cover the preparation of a standard-size test sample and basic tests for physical property determinations of microcellular urethane materials.
1344
[Page extract]
ASTM E328-02
These test methods cover the determination of the time dependence of stress (stress relaxation) in materials and structures under conditions of approximately constant constraint, constant environment, and negligible vibration.
1345
[Page extract]
SAE AMSSTD
This standard covers the general requirements and methods for testing sandwich core materials and for testing sandwich construction of the types used primarily in aircraft structures.
1346
Case study
Ventilatör ve solunum yardım cihazı bileşenlerinin test edilmesi
gereklilik Bir ventilatör (solunum cihazı), yeterince iyi nefes alamayan hastaların nefes alabilen havasının akciğerlerine girip çıkarak 'mekanik ventilasyon' sağlar.
1347
Case study
ROPP şişe kapağı kapatma torku testi
gereklilik Kardeşler İçecekler, hem Pilfer Proof (ROPP) Rulo hem de taç şişe kapakları ile çok çeşitli alkollü ve alkolsüz içecekler üretmekte ve birlikte paketlemektedir.
1348
[Page extract]
BS EN 12814-3
BS EN 12814-3 is a tensile creep test method for testing welded joints of thermoplastics semi-finished products.
1349
Sensor
AFTI - Kuvvet sensörleri
Kuvvet sensörleri AFTI ve AFG, Mecmesin 'Akıllı' gerginlik ve kompresyon yük hücreleri serisi ile kullanılmak üzere tasarlanmış çok yönlü kuvvet ve tork göstergeleridir. Okumalar, gerilim ve sıkıştırmada tepe tutma fonksiyonu ile canlı değerler…
1350
[Page extract]
Test Prosedürü
İğne penetrasyon ve sürükleme testinin gerçekleştirilmesi birkaç adımdan oluşur: