Search results
1951
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 100 mm
Mec240k-BW100
Wave Jaws (30mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
1952
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 100 mm
Mec240k-BW100
Wave Jaws (30mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
1953
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 20 kN, 25 x 50 mm
Mec11-20-BP
Pyramid Jaws (25mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1954
Accessory
Pyramid jaws for Mec11-5 Scissor Grip, 5 kN, 20 x 50mm
Mec11-5-BP
Pyramid Jaws (20mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1955
Accessory
Diamond coated jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 60 mm
Mec154-BD
Diamond Jaws (40mm high x 60mm wide) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 30 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and…
1956
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BW100
Wave Jaws (40mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 30 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…
1957
Accessory
Rubber jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 50 mm
Mec227-BG50
Rubber-faced Jaws (10mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 4mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
1958
[Page extract]
Plastic components and sub-assemblies
The successful design and production of plastic components requires careful attention to be paid to many elements. The choice of plastic material depends on the desired performance characteristics - will parts be under constant load?
1959
[Page extract]
Applications of compressive shear testing
Compressive shear testing is applied across multiple industries where materials must withstand shear stresses while compressed.
1960
Case study
Çocuklara dayanıklı kapaklar (CRC) mandreli
Özel mühendislik örneği Çocuk Korumalı Kapaklar (CRC), tork uygulanmadan önce CR kilitleme mekanizmasını etkinleştirmek için yeterli dikey kuvvet gerektirir.
1961
Event
WestPack Expo 2025
Lansmont - together with our sister brand Mecmesin - will be participating in the upcoming WestPack trade show!
1962
[Page extract]
Secant modulus testing with Mecmesin
Mecmesin testing systems such as the OmniTest and MultiTest-dV
1963
[Page extract]
What is peel testing
A peel test measures the force needed to separate two bonded materials, usually by applying force at a set angle until the adhesive bond fails.
1964
[Page extract]
Why is 180 degree peel testing important
Peel adhesion is critical to the performance and safety of many products.
1965
[Page extract]
Introduction to tear testing
Tear testing is a quality control procedure used to measure the resistance of a material to tearing under controlled conditions.
1966
[Page extract]
ASTM D4964-96
5.1 This test method for testing loop tension and elongation of elastic fabrics is considered satisfactory for acceptance testing of commercial shipments of elastic fabrics because the test method is used in the trade for acceptance testing.
1967
[Page extract]
BS EN ISO 12230
This European Standard specifies a method for the determination of the tensile properties of materials used as surfaces for sports areas.
1968
[Page extract]
BS ISO 6133
BS ISO 6133 specifies five methods of calculating, after testing, the tear strength and the adhesion strength of vulcanized rubber or fabrics coated with or adhered to rubber or plastics.
1969
Case study
Catheter cap removal torque
Customised engineering example
Our client was testing the release torque of 20 mm long plastic catheter caps with irregular features to aid finger gripping.
1970
[Page extract]
ASTM D2339
By the nature of the way adhesives are used in two-ply wood construction, shear strength is an important performance criteria.
1971
[Page extract]
ISO 594-1
Specification of the requirements for conical (Luer) fittings for use with hyperdemic syringes and needles and with certain other apparatus for medical use such as transfusion and infusion sets.
1972
[Page extract]
ISBT PTC-00019
This document provides a collection of test methods for the qualification of plastic flat-top closures applied on PET bottles that are used in the beverage industry.
1973
Event
WestPack Trade Show
Lansmont - together with our sister brand Mecmesin - will be participating in the upcoming WestPack trade show!
1974
[Page extract]
Step-by-step guide to conducting a CMT test
Prepare the specimen - Cut to size with clean edges, ensuring flutes remain undamaged, and condition as per the standard.
Calibrate the equipment - Check the load cell and platen alignment.
1975
[Page extract]
Understanding and interpreting test results
Box crush testing provides clear, measurable data to inform design and compliance decisions: