Search results
2601
[Page extract]
Accuracy and repeatability
Achieve a level of accuracy and repeatability that cannot be achieved by manual testers. Reduce your testing time and increase your throughput when performing batch tests.
2602
[Page extract]
Speak to an expert
If you need to improve product consistency, optimise processing conditions, or validate your quality control methods, Mecmesin’s technical specialists can help.
2603
Case study
Lamine otomatik ön cam çevre sızdırmazlık soyma testi
gereklilik Aracınızdaki ön cam (veya ön cam), bir çarpışma durumunda en yüksek güvenlik seviyelerini sunmak için tasarlanmış lamine camdan yapılmıştır.
2604
[Page extract]
Science & Technology
Science & Technology companies often act as an interface between business and centres of knowledge such as universities, government-funded laboratories, and in some instances corporate laboratories.
2605
Software
Emperor Torque yazılımı
Emperor™ Tork yazılımı
Tork testlerini ihtiyaçlarınıza göre tasarlamak ve özelleştirmek için neredeyse sınırsız özgürlüğe sahip kullanımı kolay yazılım. Mecmesin tarafından müşterilerimizle yakın işbirliği içinde geliştirilen Emperor ™, ürünlerinin…
2606
[Page extract]
İlaç
İlaç endüstrisi sıkı bir şekilde kontrol edilir ve sıkı düzenlemelere tabidir, bu da testin genellikle sektörü yöneten çeşitli uluslararası standartlara uygunluğu göstermenin kalbinde olduğu anlamına gelir ...
2607
[Page extract]
IEC 62137-1-1
The test method described in IEC 62137-1-1:2007 is applicable to gull-wing lead surface mounting components.
2608
[Page extract]
BS EN ISO 6892-1
This part of ISO 6892 specifies the method for tensile testing of metallic materials and defines the mechanical properties which can be determined at room temperature.
2609
[Page extract]
NF B 57 100
Section 8 covers the measurement of the tensileforce to extract a natural or synthetic cork from a still wine bottle or from a standardised glass tube, which simulates the profile of the neck of a wine bottle.
2611
[Page extract]
BS 1726-3
Springs, Helical springs, Cylindrical shape, Torque, Circular shape, Wires, Bars (materials), Parallel, Dimensional tolerances, Form tolerances, Product specification, Ordering, Mechanical testing, Heat treatment
2612
[Page extract]
ASTM D1894
This test method is used to measure the friction of plastic film and sheeting. It determines the kinetic (moving) and static (starting) resistance of one surface being dragged across another.
2613
[Page extract]
CETIE Guide 12
This guide describes the five essential rules to be observed to properly crimp a pump with an aluminium ferrule on an FEA type glass finish used for perfumery, according to the EN 14854 standard and the Cetie document GME 40.05.
2614
[Page extract]
ASTM C158
These test methods cover the determination of the modulus of rupture in bending of glass and glass-ceramics. These test methods are applicable to annealed and prestressed glasses and glass-ceramics available in varied forms.
2615
[Page extract]
ISO 13445
Specifies a method for the determination of the shear strength of adhesives used to bond materials with elastic moduli higher than the elastic modulus of the adhesive.
2616
[Page extract]
ASTM C403/C403M
This test method covers the determination of the time of setting of concrete, with slump greater than zero, by means of penetration resistance measurements on mortar sieved from the concrete mixture.
2617
[Page extract]
ASTM F1140/F1140M-13
These test methods provide a rapid means of evaluating tendencies for package failure when the package is exposed to a pressure differential. Pressure differentials may occur during processes such as sterilization and transportation.
2618
[Page extract]
BS EN ISO 3376
This International Standard specifies a method for determining the tensile strength , elongation at a specified load and elongation at break. It is applicable to all types of leather
2619
[Page extract]
ASTM C1028
This test method covers the measurement of static coefficient of friction of ceramic tile or other surfaces under both wet and dry conditions while utilizing Neolite heel assemblies. This test method can be used in the laboratory or in the field.
2620
[Page extract]
TAPPI T 821
Measures the force required to separate corrugated board between the flute tips of corrugated medium and its linerboard facings.
2621
[Page extract]
AEC Q200-005
This specification establishes the procedure and criteria to determine the ability of surface
mounted device terminations and seals to withstand bending, flexing and pulling forces which
2622
[Page extract]
ASTM D952-15
ASTM D952 is a test method that covers the determination of the bond strength or ply adhesion strength of sheet plastic and electrical insulating materials.
2623
[Page extract]
ASTM D1600
ASTM D1600 is a source of reference for definitions of abbreviated technical terms used in the plastics industry
Standards can be obtained from appropriate standard authorities.
2624
[Page extract]
USP 1207.3
USP 1207.3 provides guidance on the integrity assurance of nonporous packages intended for sterile pharmaceutical products. Background instruction is provided on the topics of leaks, leakage rate, and package sealing/closure mechanisms
2625
[Page extract]
ASTM D5169-98
This test method measures the shear strength of hook and loop touch fasteners using a recording constant rate of extension (CRE) tensile testing machine.