Search results
2301
[Page extract]
ISO 1924-2
Specifies a method for measuring the tensile strength, strain at break and tensile energy absorption of paper and board, using a testing machine operating at a constant rate of elongation (20 mm/min).
2302
Case study
Peel testing Ostomy bags
Requirement
Salts Healthcare, a leading manufacturer and supplier of health care products required a low capacity system for testing the integrity of their hydrocolloid products.
2303
[Page extract]
BS EN 3841-509
This standard specifies a method of determining the forces required to insert and extract the contact pin into and out of the terminal socket of the signal contact. It shall be used together with EN 3841-100.
2304
[Page extract]
ASTM C203
ASTM C203 is a test method that covers the determination of the breaking load and calculated flexural strength of a rectangular cross section of a preformed block-type thermal insulation tested as a simple beam.
2305
Case study
การทดสอบความตึงของฟิล์มพลาสติก
ความต้องการ ลูกค้าใช้ฟิล์มพลาสติกสองชั้นสำหรับฟิล์มบรรจุภัณฑ์สำหรับบรรจุอาหารสัตว์เลี้ยงและขนม พวกเขากำลังมองหาระบบที่ประหยัดค่าใช้จ่ายและเรียบง่ายในการวัดแรงที่ต้องใช้ในการแยกฟิล์มกว้าง 50 มม.
2306
[Page extract]
ISO 12192
Specifies a method for the determination of the edgewise compressive strength (ring crush resistance) of paper and paperboard, especially board used in the manufacture of fibreboard shipping containers.
2308
[Page extract]
ASTM D7078/D7078M-12
This test method covers the determination of the shear properties of high-modulus fiber-reinforced composite materials by clamping the ends of a V-notched specimen between two pairs of loading rails.
2309
Case study
รองที่กำหนดเองสำหรับการทดสอบการยึดเกาะของเปลือก
ตัวอย่างวิศวกรรมที่กำหนดเอง ผู้ผลิตเบาะชั้นนำที่ใช้ในยานพาหนะและเครื่องบินต้องการทดสอบความแข็งแรงในการยึดเกาะของหนังที่ยึดติดกับโลหะ วิธีการนี้ใช้ตามมาตรฐาน EN 28510-1 'Adhesives - Peel test for a flexible-bonded-to-rigid test assembly
2310
[Page extract]
ASTM D6862-11
This test method is useful for acceptance and quality control testing. Adherends, application procedure, and sample conditioning shall be as agreed upon by the manufacturer and the user of the adherends and the adhesive.
2311
[Page extract]
ISO 8009
ISO 8009:2004 specifies the minimum requirements and test methods to be used for reusable diaphragms made from natural rubber and silicone rubber. These diaphragms are intended for contraceptive use.
2312
[Page extract]
ISO 1966
Describes the design requirements and tests for the crimping of insulated and non-insulated terminations to general purpose cables, with conductors of copper, copper alloy, aluminium or aluminium alloy, in locations in which the stabilized conductor tem
2313
Case study
ความต้านทานการแตกหักของเข็มฉีดยาภายใต้แรงดัด
ความต้องการ Dong-A ST ซึ่งตั้งอยู่ในเกาหลีใต้ได้รับการยอมรับในฐานะ บริษัท ระดับโลกในด้านเภสัชภัณฑ์ที่มีจริยธรรม นอกจากนี้ยังมีธุรกิจอุปกรณ์ทางการแพทย์และแผนกวิจัยและพัฒนาที่หลากหลาย
2314
[Page extract]
ISO 178
ISO 178 is a test method for the determination of flexural properties of rigid and semi-rigid plastics. These properties include flexural modulus and flexural strength.
2315
[Page extract]
ISO 34-2
ISO 34-2 specifies a method for the determination of the tear strength of small test pieces (Delft test pieces) of vulcanized or thermoplastic rubber.
2316
[Page extract]
Wedge grips
Wedge grips - consisting of 2 interchangeable or fixed jaws in the shape of a wedge which are secured in a metal body.
2318
Event
Essentials of Cork Pull & Cork Elasticity Testing
Cork stoppers are extremely successful wine bottle closures that have been in use from ancient times.
2319
[Page extract]
ISO 9856
ISO 9856 specifies a method for determining the elastic and permanent elongation of a conveyor belt and the calculation of the elastic modulus.
2320
[Page extract]
ASTM D3826
ASTM D3826 is a tensile test method, which covers a degradation-end point, or a brittle point) for degradable polyethylene/polypropylene films and sheeting less than 1.0 mm thick.
2321
[Page extract]
BS EN 12814-7
BS EN 12814-7 is a tensile test method with waisted test specimens for testing welded joints of thermoplastics semi-finished products.
2322
[Page extract]
BS EN ISO 8339
This International Standard specifies a method for the determination of the tensile properties of sealants used in joints in building construction.
2323
[Page extract]
EN TS 15945
The purpose of DD CEN/TS 15945 is to specify test methods to evaluate the ease of opening of consumer packages, in order to improve easy access to the contents. For packages regulated for safety or similar reasons, e.g.
2324
[Page extract]
BS ISO 2285
BS ISO 2285 is a test method for determining the tension set under constant elongation of vulcanised rubber or thermoplastic.