Search results
1651
Accessory
3-Point Bend Jig, 20 kN, Steel, QC-20 fitting
432-266
A simple 3-point bend jig supplied as standard with a 5mm radius upper anvil (QC 20mm female connection) and two adjustable lower anvils also of 5mm radius.
Lower support beam is fitted with QC 20mm female connection suitable for mounting on single- and…
1652
Accessory
Heavy-duty Vice Grip - Single Action, 10 kN, QC-20 fitting
Mec154-10
MEC 154-10 (body only - aluminium):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place…
1653
Accessory
Adapter, 5 kN, 5-16 UNC to 5-16 UNC, F to F
432-293
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1654
Accessory
Adapter, 5 kN, 5-16 UNC to M10, M to M
432-333
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1655
Accessory
Compression Plate, Nickel-Plated, 50 mm, 10-32 UNF
432-343
50mm nickel-plated compression plate featuring concentric circles for helping operators to place samples centrally. Fitted with 10-32 UNF female thread. Nickel-plated compression plates are resistant to rusting.
1656
Accessory
Radiused Probe - 8 mm, 500 N, 10-32 UNF
432-354
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
6mm diameter at the tip rising to 8mm outer diameter of the probe.…
1657
Accessory
Sample cutter 25 mm wide
PSV13143
Sample cutter 25mm wide - for preparing peel and tensile samples of film/paper.
Includes spare blades and hardened protective mat on which specimens can be cut.
1658
Accessory
MLTE 1000 Long Travel Extensometer
432-842
The MLTE 1000 Long Travel Extensometer is designed to be used with Mecmesin test systems when running VectorPro MT materials testing software. It accurately measures strain directly from the test specimen to enable the most accurate calculation of the…
1659
Accessory
Fabric Grip, 200 N, 10-32 UNF
432-386
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 200N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
1660
Accessory
Parallel Jaw Grip, 500 N, 10-32 UNF
432-396
Parallel Jaw Grips are designed for tensile testing up to 500N of thin flat components and materials, which require secure gripping over an extended surface area.
Star handles allow jaw positions to be adjusted to ensure central loading during tensile…
1661
Accessory
Lightweight Vice Grip - Double Action, 100 N, Opening 0-8mm, 10-32 UNF
Mec227
MEC 227 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 100 N in tension with an…
1662
Accessory
Interface cable, VTG Tornado/MultiTest-d/Vortex-d, RS232
351-051
Connects VTG Tornado, MultiTest-d or Vortex-d to a PC for RS232 data comms to VectorPro Lite software or to a serial printer.
Comprises 9-pin male to 9-pin female D connector.
1663
Accessory
Interface cable, AFG/AFTI (Orbis Mk2/Tornado), 15-pin D socket to USB-A
351-086
Connects the AFG, AFTI (2006 - now), Orbis or Tornado (2008 - now) to the USB port of a PC for data transfer by RS232.
Comprises a 15-pin female D-connector to USB-A connector.
1664
Accessory
Extension Rod with thumbwheel, 30 mm, 5 kN, 5-16 UNC
432-008
30mm long Extension Rod 5-16 UNC female to 5-16 UNC male. Fitted with knurled thumbwheel for locking accessory in correct orientation.
1665
Accessory
Test Hook (small), 50 N, 10-32 UNF
432-118
Small Fixed Hook fitted with 10-32 UNF female thread. Used for general purpose tension tests.
1666
Accessory
Orbis and Tornado Mk II/Vortex torque cell accuracy check rig
432-621
This bench-top unit enables the on-site verification of the calibration status of Orbis MkII, Tornado MkII testers, and static torque sensors rated from 1.5 N.m to 10 N.m. Using dead-weight masses, the kit allows you to quickly decide whether or not…
1667
Accessory
Pyramid (serrated) jaws, 30 x 50 mm, 0.5 set
Mec240k-BP50
Pyramid Jaws (30mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1668
Accessory
Diamond-coated Inset jaws, 0.5 set
Mec9-EBD
MEC9-EBD Diamond Jaws
Diamond-coated Inset jaws of 37 mm height x 15 mm width, 0.5 set. For fitting into the carrier of the MEC9 Thin Wire Grip.
Used when jaws need to bite into a soft material to clamp tightly and reduce the risk of slippage.(e.g. soft…
1669
Accessory
Medium Vice Grip - Single Action, 2 kN, 20 mm opening, QC-20 fitting
Mec240k-S20
MEC 240k-S20 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 2…
1670
Accessory
Mandrel Peg Drive, 54 mm
PDV15094-A
This fixture is connected to the torque sensor of the Vortex or Helixa. It has 4 metal pegs with an internal opening of 54 mm into which the single-form mandrel can be positioned. The pegs drive the mandrel and thereby apply the tightening and release…
1671
Accessory
50 kN Wedge Grip, QC-32 fitting
Mec243-50
MEC 243-50 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 50 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1672
Accessory
Extension Rod, 25 mm, 500 N, M6 M to F
432-186
25mm long Extension Rod M6 female to M6 male. Fitted with knurled thumbwheel for locking accessory in correct orientation.
1673
Accessory
Adapter, 5 kN, 5-16 UNC to M12, M to F
432-332
Male-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1674
Accessory
Compression Plate, Hardened and Ground, 100 mm, 5-16 UNC
432-341
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
100mm diameter having 5-16 UNC female thread.
1675
Accessory
Sample cutter 15 mm wide
PSV13007
Sample cutter for preparing peel and tensile samples of film/paper. Adjustable blade spacing upto 70 mm, or quickly set at 15 mm or 1 inch wide with the width adjustment block.
Includes spare blades, width adjustment block and hardened protective mat on…