Search results
1251
[Page extract]
Comparing FCT with CMT
The flat crush test measures the compressive strength of the fluted structure in finished board, taking into account liners and adhesives.
1252
Case study
Hygienic disposal bin closure testing
Customised engineering example
A manufacturer of hygienic disposal bins came to us with a nappy (diaper) disposal unit fitted with a rotary intake mechanism.
1253
[Page extract]
Medical devices and aids
Medical device manufacturers operate in one of the world’s most competitive and highly-regulated industries, where patient safety is critical.
1254
Case study
Diamante pull-off test
Requirement
The customer was a supplier to major UK clothing retailer Marks & Spencer, who stipulate that all fasteners and attachments must be tested to failure.
1255
[Page extract]
ASTM F3014-14
1.1 This test method describes the procedure for penetration testing sharp and blunt needles used for the placement of surgical sutures. It only describes the test procedures (Phase 1) and does not define a test medium at this time.
1256
[Page extract]
ASTM D1578
Significance and Use
Test Method D1578 for testing any spun yarn for breaking strength is considered satisfactory for acceptance testing of commercial shipments since the method has been used extensively in the trade.
1257
Case study
Industrial fixtures and fasteners
Requirement
SFS intec is a global supplier of precision components, special fasteners and mechanical fastening elements, with long-standing customer relationships, in the aerospace, automotive and construction industries.
1258
[Page extract]
Grab method vs strip method
Compared with the strip method (as defined by ISO 13934-1), which grips the full width of the fabric, the grab method
1259
[Page extract]
Mechanical properties and accuracy considerations
Tensile testing via the strip method reveals mechanical properties that determine how fabrics perform in use.
1260
Case study
Smoke grenade canister integrity
Customised engineering example
A manufacturer of smoke grenades required a means of testing the cap pull-off strength. The particular challenge was to grip the smooth metal cylinder for up to 5 kN of pulling force.
1261
[Page extract]
What we do
From easy-to-use, hand-held force and torque gauges to software-controlled tensile testers and torque systems, we have the solution for your tension, compression and torque testing requirements.
1262
[Page extract]
Real-world applications
Plastic bottles and closures
In beverage and household product manufacturing, top-load testing is essential to confirm that bo
1263
[Page extract]
Coefficient of friction (COF) explained
Understanding the COF formula
The coefficient of friction (μ) is a dimensionless value calculated as:
1264
[Page extract]
Peel test procedure - step by step
Prepare the specimen: Cut and condition according to the relevant standard.
Set up the machine: Install the correct fixture for the test type.
1265
Page
Contact support
Thank you for contacting our support team
One of our Support Engineers or your local partner will be in touch soon.
1266
[Page extract]
BS EN ISO 205
Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints.
1267
[Page extract]
Introduction to climbing drum peel testing
Climbing drum peel testing is a specialised method used to measure the adhesive strength between bonded materials, particularly in flexible-to-rigid substrate combinations such as aluminium skins bonded to honeycomb cores.
1268
[Page extract]
How bridge torque is measured
Bridge torque is measured by applying rotational force to a closure until the tamper-evident bridges shear.
1269
[Page extract]
BS EN ISO 844
ISO 844 specifies a method of determining a) the compressive strength and corresponding relative deformation, or b) the compressive stress at 10 % relative deformation, and c) when desired, the compressive modulus of rigid cellular plastics.
1270
[Page extract]
Industry standards and customisation
Alignment with recognised standards
Mecmesin systems support compliance with globally recognised testing standards, including:
1271
[Page extract]
Key testing methods
Different materials require different approaches to compressive hardness testing. The most common methods are:
1272
[Page extract]
ASTM F2878-10
This test method is used for determining the force required to cause a hypodermic needle to penetrate through protective clothing material.
1273
[Page extract]
What is the 90-degree peel test?
The 90-degree peel test is a mechanical method used to measure the adhesive strength between two bonded materials.
1274
Event
Texture Testing for Bakery Applications
The primary goal for using instrumentation to measure texture is to capture an objective value to something that is typically evaluated very subjectively. Texture cannot be controlled unless it measured in a consistent and repeatable manner.
1275
[Page extract]
Introduction to penetration and puncture resistance testing
Penetration and puncture resistance testing are essential for evaluating how well a material can withstand force from sharp, pointed, or blunt objects.