Search results
901
Accessory
Split Mandrel for Stelvin aluminium closure, mechanical
PDV14161
Half-round jaws with wire-eroded faces, for use with Vortex upper fixing plate (432-321). Specify closure diameter when ordering.
902
Accessory
Pyramid (serrated) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 25 mm
Mec227-BP25
Pyramid Jaws (10mm high x 25mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 8mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals - aluminium, copper, soft steel, paper and…
903
Accessory
Rubber jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 50mm
Mec94-BG50
Rubber-faced Jaws (25mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 18mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
904
Accessory
Diamond coated jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 25 mm
Mec227-BD25
Diamond Jaws (10mm x 25mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 8mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)…
905
Accessory
Spare set of 15 needles for Shotcrete Penetrometer
432-519
Set of 15 Penetration Needles for use with the Mecmesin Shotcrete Pentrometer.
Needles fit into the needle-holder supplied as standard with the Shotcrete Penetrometer
906
Accessory
1/2" Lower Chuck Assembly for use on Helixa motor spindle
432-616
A standard self-centering 3-jaw chuck with key. It has a maximum ½ " (12.7 mm) opening and is connected to the Helixa motor-drive spindle via an adaptor with quick-release grub-screw. Used to secure a variety of test specimens for torque applications of 1…
907
Accessory
Lightweight hanger and 50 N slotted mass for verifying FPT 100 N
432-656
A lightweight hanger and an M1 slotted mass of 50N.
For use with the FPT-H1 loadcell calibration checking kit (432-635) to verify the accuracy of HILC 100 N loadcells.
908
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 80 mm
Mec240k-BW80
Wave Jaws (30mm x 80mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
909
Accessory
Pyramid-faced jaws for 10 kN Wedge Grip, 40 x 34mm
MecS622-BP
Pyramid Jaws (40mm x 34mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
910
Accessory
Diamond coated jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BD100
Diamond Jaws (40mm high x 100mm wide) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 30 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and…
911
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 10kN, 60 x 200 mm
Mec154-BW200
Wave Jaws (60mm x 200mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 22 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…
912
Accessory
Pyramid (serrated) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 100 mm
Mec227-BP100
Pyramid Jaws (10mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 6mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals - aluminium, copper, soft steel, paper…
913
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 20 kN, 25 x 50 mm
Mec11-20-BP
Pyramid Jaws (25mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
914
Accessory
Safety guard for fitting to MultiTest 0.5-i/-xt/-dV motorised test stands (1200 mm)
432-680
Mecmesin's standard safety guards are designed to prevent access by the operator to the testing area whilst the test is in progress. Guards feature an aluminium frame with integrated polycarbonate panels to allow the operator to view the test area from…
915
Accessory
Thin Wire Grip with carrier for inset jaws, 2.5 kN, QC-20 fitting
Mec9
MEC9 Thin Wire Grip
Designed to hold wires or cords when tensile testing up to 2.5 kN.
The specimen is initially wrapped around a bollard and then secured by manually clamping between either blank or diamond-coated jaws. The Mec9 is supplied with the…
916
Accessory
Pyramid jaws for Mec11-5 Scissor Grip, 5 kN, 20 x 50mm
Mec11-5-BP
Pyramid Jaws (20mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
917
Accessory
Rubber jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BG25
Rubber-faced Jaws (25mm x 25mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 18mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
918
Accessory
Wave jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 50 mm
Mec94-BW50
Wave Jaws (25mm x 50mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 16mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied…
919
Accessory
Diamond coated jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 100 mm
Mec227-BD100
Diamond Jaws (10mm x 100mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 6mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)…
920
Accessory
FINAT 2 Assisted Pull-Peel Table, 90 degrees, adjustable rails for float glass, QC-20
PDV15031
The FINAT 2 Assisted Pull-Peel table (90° Peel Test) is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of…
921
Accessory
Pyramid (serrated) jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 50 mm
Mec227-BP50
Pyramid Jaws (10mm high x 50mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 6mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals - aluminium, copper, soft steel, paper and…
922
Accessory
Pyramid-faced jaws for 10 kN Wedge Grip, 40 x 34mm
MecS622-BP
Pyramid Jaws (40mm x 34mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
923
Accessory
Lightweight hanger and 5 N slotted mass for verifying FPT 10 N
432-655
A lightweight hanger and an M1 slotted mass of 5N.
For use with the FPT-H1 loadcell calibration checking kit (432-635) to verify the accuracy of HILC 10 N loadcells.
924
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 80 mm
Mec240k-BW80
Wave Jaws (30mm x 80mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
925
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 50 mm
Mec240k-BW50
Wave Jaws (30mm x 50mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…