Search results
1151
Accessory
Lightweight Vice Grip - Double Action, 250 N, Opening 0-46mm, 10-32 UNF
Mec227-S46
MEC 227-S46 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 250 N in tension with…
1152
Accessory
Float-glass Plates for peel testing on FTP-H1, set of 5
432-651
Set of 5 pieces of Float-glass Plates having 2" width x 5" length (51mm x 127mm). Used for preparing test specimens of pressure-sensitive adhesive tapes and films for testing in accordance with international standards. FINAT, ASTM D3330, PSTC 101 etc…
1153
Accessory
Wave jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 80 mm
Mec240g-BW80
Wave Jaws (30mm x 80mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = see datasheet for various spans according to the grip body selected.
For flexible but slippy materials which need more surface contact to secure a…
1154
Accessory
Wave jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 100 mm
Mec240g-BW100
Wave Jaws (30mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = see datasheet for various spans according to the grip body selected.
For flexible but slippy materials which need more surface contact to secure…
1155
Accessory
Pyramid (serrated) jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 60 x 200 mm
Mec83-BP200
Pyramid Jaws (60mm high x 200mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For materials which need a “bite…
1156
Accessory
Charger for digital gauges, Europe, 230 V, 2-pin round
304-004
For use with Mecmesin digital force and torque gauges. 220 Volt with 2 round pins. Commonly used in Europe, South America and Asia.
The mains adaptor/charger is a constant-current type:
Primary circuit: 230V – 50Hz
Secondary circuit: 100mA constant…
1157
Accessory
Needle Probe, stainless steel, 2 mm
432-087
The 2mm diameter needle probe is made from stainless steel and has an M3 female thread. It is designed for surface puncture and penetration tests.
Commonly used with extension rod M3 male to 10-32 UNF female ... part number 432-100
1158
Accessory
Toggle Clamps, 50 mm, serrated, 500 N, 10-32 UNF
432-176
Toggle Clamp (serrated)
An adjustable jaw can be positioned to ensure that symmetrical or asymmetrical specimens are aligned centrally. The other jaw is fitted to a toggle mechanism operated by a lever to allow rapid, easy clamping of specimens for…
1159
Accessory
Self-levelling Compression Plate Steel - 116 mm, 25 kN, QC-20 fitting
MecS223k-116
MecS223k - 116mm diameter Self-levelling Compression Plate:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The…
1160
Accessory
Self-levelling Compression Plate Steel - 56 mm, 50 kN, QC-32 fitting
MecS223g-56
MecS223g - 56mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1161
Accessory
Wave jaws for Mec11-20 Scissor Grip, 20 kN, 25 x 50 mm
Mec11-20-BW
Wave Jaws (25mm x 50mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
1162
Accessory
Multi-Jaw Grip, 500 N, 10-32 UNF
432-420
Used in tension tests the Multi-Jaw Grip is for holding round and irregularly shaped specimens by clamping on the outer surface or under a 'head'.
By turning the body of the grip the claw-type jaws can be opened and closed to get a secure grasp on a…
1163
Accessory
Peg Hook, 50 N, 10-32 UNF
432-399
The Peg Hook is fitted with 10-32 UNF female thread and supplied with a male grub-screw. It is designed for use in low-load applications where a small 'eyelet' needs to be held. The angled peg is ideal for quick and easy securing of the eyelet.
1164
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 10kN, 60 x 200 mm
Mec154-BW200
Wave Jaws (60mm x 200mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 22 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…
1165
Accessory
Upper Precision Fixing Plate for Helixa sensors
432-601
Precision Upper Fixing Plate for Helixa.
Mounts onto the square-drive of Helixa torque sensors. Fitted with a precision leadscrew and sprung-loaded runners into which jaws or holding pegs can be inserted (order separately). Tighten the knob to secure…
1166
Accessory
FPT T-Peel Vice-Grips (pair) fitted with 25 mm rubber jaws
432-642
Double-action vice grips with rubber-faced jaws, typically for peel-testing on the FPT-H1 horizontal tester. 8 mm QC fitting. Sold as a pair.
A Lightweight Single-action Vice Grip used for peel and delamination testing of pressure-sensitive adhesives…
1167
Accessory
Wave jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 100 mm
Mec240g-BW100
Wave Jaws (30mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = see datasheet for various spans according to the grip body selected.
For flexible but slippy materials which need more surface contact to secure…
1168
Accessory
Wave jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 50 mm
Mec240g-BW
Wave Jaws (30mm x 30mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = see datasheet for various spans according to the grip body selected.
For flexible but slippy materials which need more surface contact to secure a…
1169
Accessory
Pyramid (serrated) jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 40 x 100 mm
Mec83-BP100
Pyramid Jaws (40mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For materials which need a “bite…
1170
Accessory
Medium Vice Grip - Single Action, 2 kN, 20 mm opening, QC-20 fitting
Mec240k-S20
MEC 240k-S20 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 2…
1171
Accessory
Wave jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 50 mm
Mec94-BW50
Wave Jaws (25mm x 50mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 16mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied…
1172
Accessory
Large Single-action Vice Grip, wave-form, 2 kN, QC-20 fitting
432-267-V02
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with wave-form jaws of 78mm wide x 28mm high having an opening of 0 - 6.5 mm. Provides…
1173
Accessory
‘T’ slot Base Plate
432-294
‘T’ slot base plate (replaces the standard base plate on single-column motorised test stands).
For use with specialist fixtures such as 1kN 3-point Bend Jig (432-294)
Includes ‘T’ bolt fittings.
1174
Accessory
Self-levelling Compression Plate Steel - 196 mm, 50 kN, QC-32 fitting
MecS223g-196
MecS223g - 196mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1175
Accessory
Self-levelling Compression Plate Steel - 196 mm, 50 kN, QC-32 fitting
MecS223g-196
MecS223g - 196mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…