Mecmesin | Search results

2076

^{[Page extract]}

ASTM C364

This test method covers the compressive properties of structural sandwich construction in a direction parallel to the sandwich facing plane.

2077

^{[Page extract]}

This document establishes minimum safety requirements and specifies appropriate test methods for children’s cutlery and feeding utensils designed for the use of children aged up to 3 years, with or without parental supervision.

2078

^{[Page extract]}

TAPPI T 807

This method describes a procedure for measuring the bursting strength of linerboard using a disk shaped diaphragm. Basis weights for this method should be 98 g/m (20#/MSF) and higher. The minimum burst should be 350 kPa (51 psi).

2079

^{[Page extract]}

ASTM D4533-11

This test method is an index test used to measure the force required to continue or propagate a tear in woven or non-woven geotextiles by the trapezoid method.

2080

^{[Page extract]}

BS EN 863

Protective clothing, Clothing, Perforating tests, Penetration tests, Mechanical testing, Tensile testing, Test equipment, Specimen preparation, Performance testing

2081

Event

Needle Sharpness & Puncture Resistance Testing

Hypodermic needles are tested to determine how their design influences the ease of insertion into the skin, patient pain and skin trauma.

2082

^{[Page extract]}

BS EN 1263-1

Safety nets, Restraint systems (protective), Construction equipment, Safety devices, Building sites, Occupational safety, Performance, Man-made fibres, Polyamide fibres, Polyolefin fibres, Ropes, Performance testing, Mechanical testing, Tensile testing,

2083

^{[Page extract]}

BS EN ISO 6892-1

This part of ISO 6892 specifies the method for tensile testing of metallic materials and defines the mechanical properties which can be determined at room temperature.

2084

^{[Page extract]}

ASTM D3469

These test methods measure the downward forces during the disengagement of lug-style caps from their respective containers. The methods measure the maximum torque developed while the cap is further disengaged by turning of the container.

2085

^{[Page extract]}

ASTM D7269/D7269M-11

These test methods cover the tensile testing of aramid yarns, cords twisted from such yarns, and fabrics woven from such cords.

2086

^{[Page extract]}

ISO 20502

SO 20502:2005 describes a method of testing ceramic coatings by scratching with a diamond stylus.

2087

^{[Page extract]}

BS EN 681-1

This standard specifies requirements for materials used in vulcanized rubber seals for: 1) cold potable water supply (up to 50®C);

2088

^{[Page extract]}

ASTM D4776 / D4776M-18

ASTM D4776 is a test method used to determine the maximum adhesion force of tyre cords in rubber compounds.

2089

^{[Page extract]}

ASTM F152-95

ASTM F152 is a test standard that covers tensile strength of nonmetallic gasketing materials at room temperature.

2090

^{[Page extract]}

EEC 2006/42/EC

The Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 is a European Union directive concerning machinery and certain parts of machinery.[1] Its main intent is to ensure a common safety level in machinery placed on the mar

2091

^{[Page extract]}

ASTM D876 - 13

ASTM D876 is a test method covering the testing of general-purpose (Grade A), low-temperature (Grade B), and high-temperature (Grade C)2 non-rigid vinyl chloride polymer tubing, or its copolymers with other materials, for use as electrical insulation.

2092

^{[Page extract]}

ISO 34-2

ISO 34-2 specifies a method for the determination of the tear strength of small test pieces (Delft test pieces) of vulcanized or thermoplastic rubber.

2093

^{[Page extract]}

PSTC 16

SCOPE1.1

2094

^{[Page extract]}

ISO 7622-1

ISO 7622-1 specifies a method for the determination of the elongation of steel cords constituting the carcass of conveyor belts, when subjected to a force corresponding to 10 % and 60 % of the specified tensile strength.

2095

^{[Page extract]}

ASTM D642-00

This test method covers compression tests on shipping containers (for example, boxes and drums) or components, or both. Shipping containers may be tested with or without contents.

2096

^{[Page extract]}

ISO 9856

ISO 9856 specifies a method for determining the elastic and permanent elongation of a conveyor belt and the calculation of the elastic modulus.

2097

Specials

UTM FAQs

FAQs How does the OmniTest universal testing machine compare in size and portability? The OmniTest universal testing machine (UTM) offer

2098

^{[Page extract]}

BS 6319-7

BS 6319-7 is a test method for determining the tensile strength of resin and polymer/cement compositions for use in construction.

2099

^{[Page extract]}

ASTM D3577

1. Scope ... 1.1 This specification describes certain requirements for packaged sterile rubber surgical gloves used in conducting surgical procedures.

2100

^{[Page extract]}

BS 1726-2

Springs, Helical springs, Cylindrical shape, Tensile loading, Circular shape, Wires, Bars (materials), Parallel, Dimensional tolerances, Form tolerances, Product specification, Ordering, Mechanical testing, Heat treatment

Search results

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

Sistemas

Instrumentos

De materiais

Instrumentos

Sistemas

Instrumentos

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}