Search results
1076
Accessory
Rubber jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 50 mm
Mec227-BG50
Rubber-faced Jaws (10mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 4mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
1077
Accessory
Interface cable, ELS(-S) loadcell to MultiTest 2.5-dV test stand
352-275
Connects the ELS and ELS-S range of loadcells to the MultiTest 2.5-dV test stand.
Comprises a 650mm long cable fitted with a Hirose 6-pin circular loadcell connector and a Binder 12-pin circular test stand connector.
1078
Accessory
Radiused Probe - 8 mm, 500 N, 10-32 UNF
432-354
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
6mm diameter at the tip rising to 8mm outer diameter of the probe.…
1079
Accessory
Diamond coated jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 50 mm
Mec240g-BD
Diamond Jaws (30mm x 50mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
1080
Accessory
Compression Plate Rectangular - Hardened Steel, 396 x 496 mm, QC-20 or QC-32 fitting
Mec36-396x496-St
MEC36-396x496-St :-
Rectangular compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Also supplied with 4 fixing legs to support the weight of the steel plate. Suitable for hard specimens…
1081
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 50 mm
Mec240k-BD50
Diamond Jaws (30mm x 50mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
1082
Accessory
50 kN Wedge Grip, QC-32 fitting
Mec243-50
MEC 243-50 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 50 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1083
Accessory
Rubber jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 100 mm
Mec227-BG100
Rubber-faced Jaws (10mm x 100mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 4mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
1084
Accessory
Blank (smooth) jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 100 mm
Mec240g-B100
Blank Jaws (30mm x 100mm) - smooth steel jaw. Allows the user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
1085
Accessory
Rubber jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 50mm
Mec94-BG50
Rubber-faced Jaws (25mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 18mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
1086
Accessory
Miniature Vice Grip, 100 N, QC-20 fitting
MecS341
Versatile, easy to use, and suitable for small components (eg bonded joints) where access is limited and tensile forces are below 100 N.
Clamping surfaces are machined with pyramid-shaped serrations to ensure optimum gripping force.
The flexible chain-…
1087
Accessory
Custom-made Safety Guards and Enclosures
PDVguard
Where the standard safety guard does not fulfil your application requirements, Mecmesin can work with you to design and produce a custom-made safety guard to meet your exact requirements. Suitable for any Mecmesin test stand. Previously-designed guards…
1088
Accessory
50 kN Wedge Grip, QC-32 fitting
Mec243-50
MEC 243-50 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 50 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1089
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 100 mm
Mec240k-BD100
Diamond Jaws (30mm x 100mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
1090
Accessory
Pneumatic Lift Mechanism to aid testing CRC closures on Vortex
PDV12112
Pneumatic Lift Mechanism to aid operation of Vortex Torque Testers when testing Child-Resistant (CRC) closures.
Raises and lowers the masses which are required as axial load to engage the child-resistant mechanism of closures.
Supplied with 50 N weight…
1091
Accessory
Rubber jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 25mm
Mec227-BG25
Rubber-faced Jaws (10mm x 25mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 6mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
1092
Accessory
25 mm/50 mm Grab Test Textile Fixture, 500 N, 10-32 UNF
432-323
The 'Grab Test' Textile Fixture has jaws of 25mm…
1093
Accessory
Compression Plate Square, Hardened Steel, 396 x 396 mm, QC-20 or QC-32 fitting
Mec36-396-St
MEC36-396-St:
Square compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Also supplied with 4 fixing legs to support the weight of the steel plate. Suitable for hard specimens such as metals…
1094
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 100 mm
Mec240k-BD100
Diamond Jaws (30mm x 100mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
1095
Accessory
Diamond coated jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 40 x 100 mm
Mec83-BD100
Diamond Jaws (40mm x 100mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For materials which need a “bite” to secure a…
1096
Accessory
Padded Radiused Probe, 500 N, 5-16 UNC
432-414
The Padded Radiused Probe is used with a short extension rod to connect to a digital force gauge to measure tension and compression.
It has a thin layer of rubber and is specially designed for use in manual handling and ergonomic assessment applications…
1097
Accessory
20 kN Wedge Grip, QC-20 fitting
Mec243-20
MEC 243-20 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 20 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1098
Accessory
Rubber jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BG25
Rubber-faced Jaws (25mm x 25mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 18mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
1099
Accessory
Lightweight hanger and 50 N slotted mass for verifying FPT 100 N
432-656
A lightweight hanger and an M1 slotted mass of 50N.
For use with the FPT-H1 loadcell calibration checking kit (432-635) to verify the accuracy of HILC 100 N loadcells.
1100
Accessory
20 kN Wedge Grip, QC-20 fitting
Mec243-20
MEC 243-20 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 20 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…