Search results
1451
Accessory
V-jaws for 10kN Wedge Grip, for round samples 2 - 10 mm
MecS622-BV
V-Jaws (2-10mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove. For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes). Supplied as 0.5 set = 2 jaws (…
1452
Accessory
QC Type M Loadcell Mounting Plate, 13 mm slot c/w M6 bolt for 100 N and 200 N S-beam loadcells
432-452
QC Type M Loadcell Mounting Plate c/w M6 bolt.
Fitted with 13 mm slot to suit 100 N and 200 N S-beam loadcells. The M6 bolt is used to secure the mounting plate onto the loadcell so that a QC type C Male Post (432-284) can be affixed to the loadcell.
1453
Accessory
V-jaws for Mec154 Heavy-duty Vice Grip, 20kN, for round samples Ø 6-34 mm
Mec154-BV6
V-Jaws (6-34 mm diameter with clamping height of 40mm) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes)…
1454
Case study
Teste de válvulas de controle de fluido e vedações
Requerimento Um sistema de elevação de gás típico para produção de petróleo e gás requer um conjunto de válvulas para operar ao longo da tubulação de produção para baixo do poço de perfuração.
1455
Case study
Teste de resistência à tração de rede de pesca para ISO1806
Requerimento As redes de pesca são uma das principais ferramentas na pesca comercial e existem muitos tipos de equipamentos de rede ativos e passivos disponíveis.
1456
Sensor
Sensors - Vortex
Torque sensors (ITC)
The ITC range of interchangeable torque sensors is specially adapted for the Vortex-i and -xt test systems. Plug and play for automatic calibration and available in 5 different capacities for all requirements, from 0 - 0.3 N.m (0 - 2.…
1457
[Page extract]
Standards and procedures
FCT results must be consistent and comparable, which is why the test is carried out to recognised standards:
1458
[Page extract]
Key test standards for ball burst testing
ASTM D3787 – Constant-rate-of-traverse (CRT) method
This standard outlines a method for determining the bursting strength of
1459
[Page extract]
Standards for double lap shear testing
Double lap shear testing is carried out to international standards that ensure consistency and comparability of results. The most widely used are:
1460
Product
Testador de ferramenta de torque
Alluris TTT-300
PSV21020
A linha TTT-300 apresenta testadores de torque portáteis projetados para medir o torque do clique e os valores máximos de torque de indicar e definir ferramentas de torque. 5 modelos diferentes estão disponíveis com capacidades de 2 Nm a 50N.m, tornando-…
1461
[Page extract]
Example: Cork extraction testing for bottling efficiency
Designed for high-volume bottling plants, the automated tester measures the extraction force and weight of 75 corks from each production batch.
1462
Case study
Teste de embalagem de bebida probiótica
Requerimento À medida que a demanda por suplementos alimentares continua a aumentar, produtos que estimulam o sistema imunológico, como prebióticos e probióticos, estão entre os mais populares.
1463
[Page extract]
Calculating secant modulus
Accurate calculation requires stress-strain data, typically obtained from tensile, compressive, or
1464
Accessory
Diamond coated jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BD25
Diamond Jaws (25mm high x 25mm wide) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 20 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and…
1465
Case study
Medindo a resistência ao cisalhamento de materiais de construção soltos
Exemplo de engenharia customizada A resistência ao cisalhamento de materiais compactados (por exemplo, solo e areia) pode ser difícil de testar.
1467
Accessory
Pyramid (serrated) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 100 mm
Mec227-BP100
Pyramid Jaws (10mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 6mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals - aluminium, copper, soft steel, paper…
1468
[Page extract]
Controls that mean business
Personalised user accounts enable quick access to commonly performed tests, and restricts who can create or run tests, view results and produce reports.
1469
[Page extract]
Applications in industry
The Delft tear test is used wherever rubber and thermoplastics need to maintain performance under stress. Common uses include:
1470
Case study
Sachet compression test
Requirement
To compress six sachets of ketchup or mayonnaise until failure of the packaging occurred.
The peak compressive force was required as the test result.
1471
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 30 mm
Mec240k-BW
Wave Jaws (30mm x 30mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
1472
[Page extract]
ASTM F543-13
This specification provides requirements for materials, finish and marking, care and handling, and the acceptable dimensions and tolerances for metallic bone screws that are implanted into bone.
1473
[Page extract]
ASTM D2919
This test method covers data for assessing the durability of adhesive lap-shear joints while stressed in contact with air, air in equilibrium with certain solutions, water, aqueous solutions, or other environments at various temperatures.
1474
[Page extract]
Why flexural strength is important
Flexural strength testing is a vital tool for ensuring material reliability and safety in end-use conditions.
Applications across industries:
1475
[Page extract]
Speak to an Expert
Compressive deformation testing is essential for ensuring material performance, safety, and compliance in industries from construction to sports manufacturing.