Category
Part Number
432-262
Description
Fitted with a 45mm wide roller cam having a cross-hatch knurled surface. The roller closes onto a serrated contact face of the grip body.
The specimen is folded around the knurled roller to give maximum contact area. As a load is applied to the specimen the cam self-tightens, spreading the load evenly around the cam and against the serrated body of the grip.
Used for slippy specimens where a serrated surface is necessary to bite into the material and prevent slippage.
Knurled roller, 10mm Ø
Serrated surface on the contact face of grip body
Clamping width 45mm,
Specimen thickness 0 – 5 mm
Maximum load: 2 kN
Fitted with a QC-20mm female hole for connection to the base of test stands and to loadcell
The specimen is folded around the knurled roller to give maximum contact area. As a load is applied to the specimen the cam self-tightens, spreading the load evenly around the cam and against the serrated body of the grip.
Used for slippy specimens where a serrated surface is necessary to bite into the material and prevent slippage.
Knurled roller, 10mm Ø
Serrated surface on the contact face of grip body
Clamping width 45mm,
Specimen thickness 0 – 5 mm
Maximum load: 2 kN
Fitted with a QC-20mm female hole for connection to the base of test stands and to loadcell
Images
Datasheet
Spring-Loaded Fold Grip, QC fitting
Related Parts
Fittings
| Quick Change |
|---|
| 20 mm |
Weight
680 g
Diagram
432-262 Spring-Loaded Fold Grips
Speak to an expert
Got a question about this accessory? Get in touch and speak to one of our Technical Sales Engineers now...