Search results
1401
Case study
Surgical instrument operational torque
Customised engineering example
Endoscopic and laparoscopic surgical instruments are operated by axial and rotating adjustments in the handle, to perform precision movement in the head.
1402
[Page extract]
ASTM D6484 / D6484M - 14
ASTM D6484 is a test method that determines the open-hole compressive strength of multidirectional polymer matrix composite laminates reinforced by high-modulus fibers.
1403
[Page extract]
ISO 505
ISO 505 specifies a method of test for the measurement of the propagation resistance of an initial tear in textile conveyor belts, either in full thickness or of the carcass only.
1404
[Page extract]
ASTM D3039 / D3039M
ASTM D3039 determines the in-plane tensile properties of polymer matrix composite materials reinforced by high-modulus fibers. A number of calculations can be made including ultimate tensile strength, ultimate tensile strain, tensile chord modulus of
1405
Case study
Kapsüllü tıpalar üzerinde yapışkan testi
Gereklilik Kapsüllü bir tıpa (T-top, Bar-Top veya Altop®), ucunun ahşap, PVC, porselen, metal, cam veya başka bir malzemeden bir kapağa yapıştırıldığı doğal veya sentetik bir mantar tıpadır.
1406
[Page extract]
ASTM D4027-98
This test method describes equipment and procedures to measure the shear modulus and shear strength of adhesive layers between rigid adherends.
1407
[Page extract]
BS 2782-12: 1210A to C
BS 2782-12: Method 1210A to C specifies a test method for testing the longitudinal tensile properties of glass-reinforced thermosetting plastics (GRP) pipes.
1408
Event
Coefficient of Friction (COF) Testing
Coefficient of Friction (COF) testing measures the static and kinetic friction values to help determine the quality of the final product.
1409
[Page extract]
BS EN 60794-1-21:2015+A1
This part of IEC 60794 applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors.
1410
[Page extract]
ASTM F2256-05
This test method is intended to provide a means for comparison of the adhesive strengths of tissue adhesives intended for use as surgical adhesives or sealants, or both, on soft tissue.
1411
Case study
90 degree peel test filter paper
Customised engineering example
Floating roller peel jigs are regularly used for testing laminates where the backing sheet is rigid and the facing sheet is flexible (e.g. security cards)
1412
Event
Automotive Component Torque Testing
This webinar will focus on the measurement of the torque resistance in knobs, switches, and torsion springs, which are among several components in automobiles that require testing to ensure quality, performance, and safety.
1413
[Page extract]
Equipment and procedures
A flat crush tester comprises two smooth, parallel platens, one fixed and one moving under controlled load application. The conditioned specimen is placed between the platens with flutes oriented vertically.
1414
Case study
İnşaat güvenlik ağı sertifikasyon testi
gereklilik IPS Güvenlik Ağları, inşaat endüstrisi için binlerce güvenlik ağını tedarik eder ve kurar. Ağlar, düşmeleri önlemek ve döküntülerden korumak için kullanılır.
1415
[Page extract]
ISO 8113
ISO 8113 specifies a method for determination of the resistance of glass containers to external force in the direction of the vertical axis.
1416
[Page extract]
Loop tack test procedure
Sample preparation
Cut adhesive strips to the required length and width stated in the chosen standard. Condition the samples at the specified temperature and humidity before testing.
1417
[Page extract]
BS EN 12316-1
Waterproof materials, Sheet materials, Flexible materials, Peel resistance, Peeling tests, Joints, Bitumens, Bituminous products, Roof coverings, Test equipment, Specimen preparation
1418
[Page extract]
ASTM C273/C273M
This test method is used to determine core shear properties of a sandwich construction material using loading plates bonded to the outer surfaces or skins (facesheets).
1419
[Page extract]
BS EN ISO 3386
BS EN ISO 3386-1 specifies a method for the determination of the compression stress/strain characteristic of low-density flexible cellular materials up to 250 kg/m3.
1420
Case study
Actuation force of pump dispenser
Requirement
The customer manufactures a range of dispensing pumps for the cosmetic and beauty-care industry. A requirement was identified to measure the actuation force of the pump assembly and the pull-off force of the pump handle.
1421
Case study
Çocuklara dayanıklı kapağın 'sıkma ve bükme' torkunun sökülmesi
gereklilik Reckitt-Benckiser, farklı HDPE (Yüksek Yoğunluklu Polietilen) kuğu boynu 'Harpic' temizleme sıvısı şişelerinin üreticisidir.
1422
[Page extract]
BS EN 12209
BS EN 12209:2016 specifies requirements and test methods for the durability, strength, security, and function of mechanically operated locks and latches and their locking plates for use in doors, window doors and entrance doors in buildings.
1423
[Page extract]
ASTM D3575
ASTM D3575 covers a number of tests for determining properties of polyethylene foams including compressive strength.
1424
Case study
Stabilize yay testi
Özel mühendislik örneği Müvekkilimizin birkaç küçük, hafif yayı sıkıştırma altında test etmesi gerekiyordu. Yayların burkulmasını ve yanal hareketini önlemek için bir destek mili veya kılavuz çubuğu gereklidir.
1425
Event
Live Demonstration: Face mask strength testing & Syringe plunger breakaway force testing
Medical device testing ensures patient safety, regulatory compliance, performance, quality, usability, claims examination, and post-market safety.