Search results
351
Accessory
U-form Pneumatic Vice Grip - Single Action, 5 kN, Pair, QC-20 fitting
Mec83
MEC 83 (body only) :
A pair of pneumatically-operated, Single-action U-form Vice Grips with a standard opening of 0-10mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manually-adjusted jaw holder + 1 pneumatic piston…
352
Accessory
Cable Cam Grip (small), serrated, 1 kN, 10-32 UNF
432-390
Cable Cam Grip - serrated, small
Designed for holding insulated cables and wire. The sample is secured by the cam, which self-tightens as a load is applied and spreads the load evenly.
Serrated cams are preferred for materials which may be slippy and…
353
Accessory
Floating Peel Jig (ISO 10373-1), 500 N, 10-32 UNF
432-413
The Floating Peel Jig is used to test the peel strength between adhesive layers of flat, rigid samples such as credit cards.
A portion of the top layer is placed between the rollers and held in an upper grip (order separately). As load is applied the…
354
Accessory
Assisted Pull-Peel Table 90 Degree, 500 N
432-051
The Assisted Pull-Peel table is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of the peel table is directly…
355
Event
Mecmesin Webinar: Introduction to consumer packaging testing
In the competitive world of consumer goods, damaged packaging isn't just a financial setback—it can tarnish your brand's reputation.
Customers are far less likely to choose a product with compromised packaging or one that arrives damaged due
356
[Page extract]
Understanding ASTM D2718 standards
The ASTM D2718 standard sets out the procedures for conducting planar shear tests on structural panels using the
357
[Page extract]
Standard methods and procedures
T-peel testing is governed by recognised standards to ensure consistency and repeatability of results. The most common are:
358
Software
VectorPro Lite torque motorised stand
VectorPro® Lite software
Available as an optional extra to Mecmesin’s Vortex-dV motorised torque tester, VectorPro Lite is an advanced data acquisition and plotting software package. Call-up pre-stored test routines, present test data graphically and…
359
Product
Otomatik sürtünme, soyulma ve yırtılma test cihazı
FPT-H1
817-001
FPT-H1-i , bir bilgisayarda çalışan yazılım tarafından kontrol edilen tam özellikli bir test sistemidir. Doğru ve kullanımı kolay , çeşitli malzemelerin sürtünme, soyulma ve yırtılma katsayısını test etmek için özel olarak tasarlanmıştır.
360
Case study
Cap removal test of plastic vial
Requirement
The customer approached Mecmesin with a specification to pull-off the cap of a pharmaceutical phial. The test equipment needed to be simple to use and able to perform repeatable tests.
361
Case study
Aircraft brake unit spring testing
Requirement
The Aircraft Wheels and Brakes department at British Airways plc are responsible for the repair and overhaul of the aircraft brake units on the Boeing 737, 747, 757, 777 and Airbus A319, A320 and A321 aircraft.
362
Case study
Measuring shear strength of loose building materials
Customised engineering example
The shear strength of compacted materials (e.g. soil and sand) can be awkward to test.
363
[Page extract]
Why Mecmesin for cleavage strength testing
Precision systems for varied materials
Mecmesin provides test solutions for both timber cleavage strength and structural adhesive evaluation.
364
Product
Motorlu Çekme Test Cihazı
Alluris FMT-W40
PSV21018
FMT-W40, motorlu bir kablo terminali çekme test cihazıdır. 500N (110 lbf) veya 1000N (220 lbf) 'ye kadar gerilme mukavemeti kapasitesine sahip 2 modeli mevcuttur. Sağlamdır, kompakttır ve tezgah üzerinde çok az yer kaplar. Minimum eğitimle kullanım…
365
[Page extract]
Industry applications of tension testing
Manufacturing and product development
In engineering and manufacturing, tension testing verifies the performance of raw materials, components and finished products.
366
Case study
Top-load testing PET bottles
Requirement
Esterform Packaging manufacture more than a million PET bottles and preforms per day for major processors of bottled water, juices, soft drinks, dairy and household products.
367
[Page extract]
Applications of bulk analysis testing
Industries and products
Bulk testing is relevant to a wide range of industries.
368
[Page extract]
Torque systems
Do you need a level of accuracy and repeatability which just cannot be achieved by manual testers? Do you want to reduce testing time and increase throughput for operators when performing batch tests?
369
Case study
Pork pie penetration test
Requirement
Vale of Mowbray have been baking pork pies since 1928.
370
Case study
Custom bottle cap mandrels
Customised engineering example
Plastic caps applied to bottles may be thin-walled and flexible, so that they become distorted when gripped by an operator during torque testing.
371
Event
Essentials of Consumer Packaging Testing
Maximize COST SAVINGS for your consumer packaging by minimizing excess material and “over design” while keeping your products protected in transit.
372
Case study
Box-forming and edge crush strength of cartons
Customised engineering example
The Box Crush Test (BCT) is commonly used to assess the effect of applying an axial top-load force upon the flat sides of carton boxes to simulate stacking them in a warehouse or during transportation.
373
Case study
Connection test on fuel injection components
Requirement
A number of destructive and non-destructive tests were required on a plastic assembly used in a fuel injection assembly. The tests included:
374
Case study
Lighting weld test
Requirement
A simple, low-cost fixture was specified by the customer for the Quality Control Laboratory. This was to hold a lighting assembly in a test where the welded contacts were pulled off.
375
Case study
Detonator shock tubing
Requirement
A manufacturer of non-electric shock detonator tubing for industrial applications had a specialist tensile testing requirement.