Search results
1876
Accessory
Interface cable, CFG+, RS232 Jack plug to 9-pin D-type socket
351-077
Connects the CFG+ to a PC for RS232 data transfer. Comprises 2.5 mm jack plug to 9-pin female D-connector.
1877
Accessory
Heavy-duty Vice Grip - Single Action, 20 kN, QC-20 fitting
Mec154-20
MEC 154-20 (body only - steel):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.…
1878
Accessory
Adapter, 500 N, 10-32 UNF to 5-16 UNC, F to F
432-329
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1879
Accessory
Compression Plate, Hardened and Ground, 19 mm, 10-32 UNF
432-337
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
19mm diameter having 10-32 UNF female thread.
1880
Accessory
MLTE 1000 Long Travel Extensometer
432-842
The MLTE 1000 Long Travel Extensometer is designed to be used with Mecmesin test systems when running VectorPro MT materials testing software. It accurately measures strain directly from the test specimen to enable the most accurate calculation of the…
1881
Accessory
Small Parallel Grip, 500 N, M6
432-211
Small Parallel Grips are designed for tensile testing of small flat components and materials below 500N.
A floating ball screw attachment ensures central loading during tensile testing and wing screws are used to quickly position the jaws.
Jaw faces…
1882
Accessory
Pull Peel Wheel Fixture, QC-20 fitting
432-265
The pull peel wheel fixture is designed for mounting to the base of a motorised test stand to test the peel strength of flexible adhesive-backed materials (eg. tapes).
Specimens are wound around the Pull Peel Wheel and the free end is clamped in a…
1883
Accessory
Crosshead Extension and Elevated Base Plate
432-406
The 38mm crosshead extension and elevated base plate are supplied together. They are used for fitting larger samples up to 200 mm diameter, to a single-column MultiTest system. When fitted, the cantilever effect of such an extension serves to reduce the…
1884
Accessory
Footswitch to simulate 'Start' on MultiTest-i and 'xt' stands
PDV14081
Footswitch to simulate 'Start' on '-i' and 'xt' stands from the Vortex, Helixa and MultiTest product families.
Used to free-up an operators hands for other operations (eg. holding a specimen between grips) when launching a test.
1885
Accessory
QC Type K Adapter, 20 mm F to 5/16 UNC fixing bolt, c/w pin
432-429
QC Female Sleeve Type K c/w cross-pin with 5-16 UNC Fixing Bolt:
Converts a non-QC type grip having a 5-16 UNC fixing thread into a QC type thereby allowing for quick interchange of grips.
1886
Case study
Viski tıpalarının ekstraksiyon testi
gereklilik 1000 $ 'lık premium ürünlerinin kalitesini ve depolamasını iyileştirmek için, önde gelen bir İskoç viski üreticisinin Ar-Ge ekibinin şişe tapalarının tasarımını optimize etmesi gerekiyordu.
1887
[Page extract]
Packaging
Mecmesin testing solutions for consumer (primary and secondary) and transit (tertiary) packaging.
1888
Case study
Çanta tokaları ve diğer bagaj bileşenleri
gereklilik Bir kadının (veya kişinin!) El çantasının görünüşte sonsuz derinlikleri gizemle kaplıdır.
1889
[Page extract]
Key applications of pull-off and pull-out testing
The versatility of these tests means they are used across a broad range of products and industries.
1890
[Page extract]
Interpreting compressive strength test results
Interpreting results involves more than noting the peak load. Stress–strain curves reveal additional information such as modulus, yield point, and failure mode.
1891
[Page extract]
Interpreting trapezoidal tear test results
Test results typically report peak tear force in newtons, and sometimes the average force during propagation. Engineers use this data to:
1892
[Page extract]
Comparing adhesion test methods
While the peel wheel test maintains a constant 90° angle, other tests such as the 180° peel test are also widely used.
1893
[Page extract]
CCT compared to ECT and FCT
CCT - Material-level test, used to assess raw medium quality before conversion into board
1894
[Page extract]
Common challenges and solutions
Torque testing can be influenced by several factors:
1895
[Page extract]
Importance of testing elasticity and ultimate strength
Elasticity determines how well a material returns to its original shape after stretching. Ultimate strength indicates the maximum stress it can withstand before failure.
1896
[Page extract]
Applications of floating roller peel testing
Floating roller peel testing is employed to verify both material selection and process stability in various high-performance sectors:
1897
[Page extract]
Benefits of regular ergonomic testing
Routine testing offers measurable benefits for employers, healthcare providers, and safety professionals:
1898
[Page extract]
Test Equipment
Mecmesin offers a range of force testing equipment suitable for syringe testing under ISO 11040-4 Annex F. Our solutions include the OmniTest universal testing machine, which is highly accurate and reliable for this application.
1899
[Page extract]
Importance of shear testing in the food industry
Texture plays a decisive role in consumer perception of food quality.
1900
[Page extract]
Common challenges in fastening torque
Believing tighter is always better, leading to over-torquing.
Ignoring lubrication effects, which can reduce the torque needed for the same clamping force.
Relying on uncalibrated hand tools, which can produce inconsistent res