Search results
1076
[Page extract]
ASTM D5602/D5602M-18
An important factor affecting the performance of many membrane roofing systems is their ability to resist static puncture loads. This test method provides a means for assessing static puncture resistance.
1077
[Page extract]
ASTM E1012-12e1
It has been shown that bending stresses that inadvertently occur due to misalignment between the applied force and the specimen axes during the application of tensile and compressive forces can affect the test results.
1078
Case study
Eklem gücünün fizyolojik ölçümü
gereklilik Melbourne'daki La Trobe Üniversitesi, genellikle ayak başparmağı olarak bilinen ilk Metatarsophalangeal eklemi test etmek için bir cihaza ihtiyaç duydu. Farklı hastaların ayak kuvvetlerini karşılaştırmak istediler.
1079
Case study
Tamper-Proof Closure Test
Requirement
Alcoa required a system to quickly test the tamper-proof rings on soft drink and mineral water closures.
The system had to be easy to operate and allow caps to be loaded quickly.
1080
Case study
Üstten yüklemeli PET şişeler
gereklilik Esterform Packaging, şişelenmiş su, meyve suları, alkolsüz içecekler, süt ürünleri ve ev ürünleri büyük işlemcileri için günde bir milyondan fazla PET şişe ve preform üretmektedir.
1081
Case study
Adjustable spectacles torque test
Customised engineering example
Adlens manufacture adaptive spectacle lenses, where the optical power is adjusted by a side dial which is then removed.
1082
[Page extract]
Standards for compressive hardness testing
Internationally recognised standards ensure that compressive hardness tests are accurate, repeatable, and comparable.
1083
[Page extract]
Why choose Mecmesin for fastening torque testing
Mecmesin offers a full range of precision torque testers and fixtures for applications from delicate electronics to heavy industrial bolting.
1084
[Page extract]
Mecmesin solutions for equibiaxial flexure testing
Mecmesin designs and manufactures precision equipment for standards-compliant equibiaxial flexure compression testing, including the concentric ring method. Our systems combine robust mechanical design with advanced control and analysis software.
1085
[Page extract]
How is a three-point bend test performed?
Test setup and procedure
The test begins with preparing a specimen, often a rectangular bar, from materials such as plastics, composites, wood, or metals.
1086
[Page extract]
How to perform a breaking torque test
Required equipment and setup
Mecmesin offers a range of torque testing systems suited to different torque capacities and application requir
1087
[Page extract]
Mecmesin systems for top-load testing
Vertical load and axial resistance expertise
Mecmesin offers dedicated axial load test systems widely used for
1088
Case study
Glued cardboard packaging integrity
Requirement
Graphic Packaging International is a leading designer and manufacturer of food and beverage packaging.
1089
Case study
ROPP bottle cap closure torque test
Requirement
Brothers Drinks manufacture and co-pack a wide range of alcoholic and non-alcoholic beverages with both Roll on Pilfer Proof (ROPP) and crown bottle caps.
1090
Sensor
Sensors - MultiTest-i & -xt
Force sensors
The ILC range of interchangeable loadcells are specially adapted for the MultiTest-i and -xt test systems. Plug and play for automatic calibration and a range of capacities for all requirements, from 2 N to 50 kN.
View sensor range
1091
[Page extract]
Compression
Compression testing is a way of determining how something will react when a compressive force is applied to it. It typically involves measuring the relationship between the applied force and how much the object deforms.
It is performed to:
1092
Case study
Headset microphone joint torque
Requirement
Jabra is a subsidiary of GN Netcom and is a global manufacturer of innovative headsets (wireless and corded) and speakerphone solutions.
1093
Case study
Çerçeve ayarlama tork testini izleyin
gereklilik 1980'li yılların ortalarında mekanik saat endüstrisinin yeniden canlandırılmasından bu yana meraklılar mekanik kronometri tarafından daha fazla emildi ve yeni ve eski modellerin performansını karşılaştırmaktan zevk aldılar.
1094
Product
Falling dart impact testers
MEC-FD range
MEC-FD1
The Mecmesin MEC-FD Falling Dart Impact Tester range is designed to measure the impact resistance or toughness of plastic films in compliance with ASTM D1709 and ISO 7765-1 free-falling dart Methods A and B.
Dart and weight accessories required…
1095
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+Ko
MEC 240k- S30+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter…
1096
Accessory
Pyramid (serrated) jaws, 30 x 100 mm, 0.5 set
Mec240k-BP100
Pyramid Jaws (30mm x 100mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1097
Accessory
Wood Shear Test Jig, 25 kN, QC-20 or QC-32 fitting
Mec17
Wood Shear Tester DIN 52367, with torque-free shearing for wood samples according to ISO 6238, EN 392 and for glued laminated timber to BS 373. ASTM D143 version also available.
Connects to test stand and loadcell via QC 20mm or 32mm fixings. Please…
1098
Accessory
Crush Test Fixture with Precision Guide
PSV21062
Precise alignment of the upper compression plate with the test piece is essential for optimum accuracy of results. Mecmesin recommends a minimum of self-adjusting compression plates and, for ECT and RCT tests, the Crush Test Fixture featuring a Precision…
1099
Accessory
Interface cable, BFG to MultiTest-d, RS232 data transfer only
351-076
Connects the BFG to a MultiTest-d for RS232 data comms transfer only.
Comprises 15-pin female D-connector to 25-pin male D-connector.
For transfer of data from MultiTest-d to PC, choose also either the 432-450 or 351-051 cables.
1100
Accessory
Small Single-action Vice Grip, 200 N, QC-20 fitting
432-264
A general-purpose Single-action Vice Grip.
Ideal for testing low force flat specimens. The open side design facilitates easy loading of thin, non-rigid samples, which are clamped in place.
Fitted with 30 mm x 30 mm flat-faced jaws and rated to 200 N in…