Search results
1351
[Page extract]
ASTM D4833-07
This test method is an index test for determining the puncture resistance of geomembranes and related products. The use of this test method is to establish an index value by providing standard criteria and a basis for uniform reporting.
1352
[Page extract]
Yield point testing methods
Yield point testing is most often performed using tensile testing, in which a specimen is subjected to a steadily increasing axial load until plastic deformation occurs.
1353
Event
Tensile Testing for Wiring Harness Connections
The only way of really knowing the strength of a crimped terminal is to pull it. This can reveal production problems, where strand nicks, incorrect crimp height, or effects from changes in terminal supply, may not be clearly apparent.
1354
[Page extract]
Comparison of flexure testing methods
Method
Loading direction
Best suited for
Advantages
1355
[Page extract]
BS EN ISO 4624
Describes methods for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product.
1356
[Page extract]
SAE USCAR-21-4
This specification defines test methods and requirements for validation of solderless crimped connections.
1357
[Page extract]
Introduction to friction and its importance
Friction is the resistive force that occurs when two surfaces interact. It plays a fundamental role in engineering and manufacturing.
1358
[Page extract]
Tension testing process
Tension testing is the most common method for evaluating tensile deformation and produces quantitative data on how materials behave under controlled pulling forces.
1359
[Page extract]
EN 22872
EN 22872 specifies two methods for testing complete, filled transport packages for compression resistance.
1360
Case study
Adhesive test on capsulated stoppers
Requirement
A capsulated stopper (T-top, Bar-Top or Altop®) is a natural or synthetic cork stopper where the end is glued into a cap of wood, PVC, porcelain, metal, glass or other material.
1361
[Page extract]
ASTM D5635-11
An important factor affecting the performance of membrane roofing systems is their ability to resist dynamic puncture loads. This test method provides a means to assess dynamic puncture resistance.
1362
[Page extract]
Introduction to tensile testing
Tensile testing is one of the most widely used methods in material science for determining the mechanical properties of materials under uniaxial tension.
1363
[Page extract]
Specialised testing techniques
Application areas
Cantilever bend and anchorage strength tests can be adapted for niche applications, including:
1364
Case study
Clothing button pull-off TTF test
Requirement
The customer was a supplier to major UK clothing retailer Marks & Spencer, who stipulate that all fasteners and attachments must be tested to failure.
1365
[Page extract]
Understanding corrugated cardboard resistance
The compressive resistance of corrugated cardboard depends on factors such as flute profile, board structure, and paper quality.
1366
Case study
Engine fuel pump spring characteristics measurement
Requirement
One of the largest automotive parts manufacturers in the Czech Republic, part of a major group, required a number of its component parts tested under high loads.
1367
[Page extract]
Importance of ergonomic strength testing
Ergonomic strength testing is essential for ensuring that human performance matches task requirements. This alignment reduces the risk of musculoskeletal injuries and improves long-term health outcomes.
1368
[Page extract]
Gels and hydrocolloids
Gels and hydrocolloids such as agar, gelatin, xanthan and guar gum, etc. are widely used in the food, cosmetics/personal care, and medical/pharmaceutical industries.
1369
[Page extract]
Manual controls and switches
Switches come in many different configurations... toggle, rotary, mercury, push-button, reversing, relay and circuit breaker.
1370
Product
Otomatik sürtünme, soyulma ve yırtılma test cihazı
FPT-H1
817-001
FPT-H1-i , bir bilgisayarda çalışan yazılım tarafından kontrol edilen tam özellikli bir test sistemidir. Doğru ve kullanımı kolay , çeşitli malzemelerin sürtünme, soyulma ve yırtılma katsayısını test etmek için özel olarak tasarlanmıştır.
1371
Product
Otomatik tork test cihazı
Girdap-ı
876-009
Vortex-i , bir bilgisayarda çalışan yazılım tarafından kontrol edilen aralık tork test cihazının en üst noktasıdır. 10 Nm'ye kadar statik torku ölçmek için doğru, kullanımı kolay ve optimize edilmiştir Çok çeşitli kapakların ve bileşenlerin otomatik…
1372
Event
The fundamentals of torque testing
If you have every struggled to open your favorite bottle of water or jam, or required help loosening the lug nuts on your car's wheels, it's likely due to a case of over-torque.
1373
Case study
Glued cardboard packaging integrity
Requirement
Graphic Packaging International is a leading designer and manufacturer of food and beverage packaging.
1374
Case study
Ölçülü inhalerler, otomatik enjektörler ve insülin kalemleri için dozaj kontrol tork testleri
gereklilik En iyi hasta iyileşme ve refah şansını sağlamak için doğru uygulama ve uygun ilaç dozunun temel olduğunu söylemeye gerek yoktur.
1375
[Page extract]
Example: Cork extraction testing for bottling efficiency
Designed for high-volume bottling plants, the automated tester measures the extraction force and weight of 75 corks from each production batch.