Search results
776
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
777
Accessory
3- & 4-point Bend Jig, 50 kN, Aluminium, QC-32 fitting
Mec22-360
MEC22 - A fully-configurable 50 kN Bend Jig in aluminium.
The main support beam has a bending span up to 330 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single upper anvil…
778
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+2Ko
MEC 240k- S30+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
779
Accessory
V-jaws for Mec240g U-Form Vice Grip, 5 kN, for round sample Ø 5-50 mm
Mec240g-BV5
V-Jaws (5-50mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes)
Supplied as 0.5 set = 2 jaws (…
780
Accessory
V-jaws for Mec240k Medium Vice Grip, 2.5 kN, for round samples Ø 3-52 mm
Mec240k-BV3
V-Jaws (3-52mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes)
Supplied as 0.5 set = 2 jaws (…
781
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
782
Accessory
Lower Torque Fixing Table, Vortex stands
432-320
Lower Torque Fixing Table.
Offers highly versatile holding of containers and specimens when torque testing. Fully adjustable between 10 - 190 mm opening (diameter) to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as…
783
Accessory
V-jaws for 10kN Wedge Grip, for round samples 2 - 10 mm
MecS622-BV
V-Jaws (2-10mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove. For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes). Supplied as 0.5 set = 2 jaws (…
784
Accessory
Wedge Grip (small), 500 N, 10-32 UNF
432-385
The small, lightweight Wedge Grip is ideal for tensile testing below 500 N.
A spring-loaded lever ensures the serrated jaws (16mm wide x 20mm high) are easy to open for fast securing and release of samples. As load is applied, the self-tightening action…
785
Accessory
Interface cable, AFG/AFTI to MultiTest-dV / Vortex-dV, Stand reverse & RS232
351-092
Interface cable, AFG to MultiTest-dV (2003-April 2020)…
786
Accessory
V-jaws for 20 & 50kN Wedge Grip, round samples 4-16 mm
Mec243-BV16
V-Jaws (4-16mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes).
Supplied as 0.5 set = 2 jaws (…
787
Accessory
Compression Plate, Hardened and Ground, 50 mm, M6
432-197
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
50mm diameter having M6 female thread.
788
Accessory
Compression Plate, Vented by Holes & Cone, 50 mm, 5-16 UNC
432-348
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
789
Accessory
3- & 4-point Bend Jig, 50 kN, Aluminium, QC-32 fitting
Mec22-360
MEC22 - A fully-configurable 50 kN Bend Jig in aluminium.
The main support beam has a bending span up to 330 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single upper anvil…
790
Accessory
Webbing Bollard Grips
PDV8041
Webbing bollard grips provide smooth surfaces to support rope-like specimens such as nets and webbing.
791
Accessory
Flat Crush Test Upper and Lower Plates with Modified Anvil Plate and Self-Adjusting Adapter
PDV11089
A number of test methods and standards employed by various industry bodies call upon specific crush fixtures and associated accessories to be used in conjunction with a compression tester. The Flat Crush Test fixtures support the test piece on the lower…
792
Accessory
V-jaw vice clamp, four jaws on screw-action adjuster, QC-20 fitting
432-678
432-678 is a vice fixture for mounting to the base of a test stand when performing tension and compression tests. It has four jaws, with two jaws being vertically spaced on either side. This provides increased stability by clamping at alternate heights on…
793
Accessory
Large Chain Link Assembly (short), 2.5 kN, 5-16 UNC
PSV8057
The Large Chain Link Assembly (short length) is fitted with a 5-16 UNC female thread and supplied with a male grub-screw.
It is fixed to other grips thereby allowing a flexible connection, which is often used for providing alignment when pulling large…
794
Accessory
V-jaws for Mec154 Heavy-duty Vice Grip, 20kN, for round samples Ø 4-34 mm
Mec154-BV4
V-Jaws (4-34mm diameter with clamping height of 40mm) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes).…
795
Accessory
Medium Vice Grip - Single Action, 1 kN, 30 mm opening, QC-20 fitting
Mec240k-S30
MEC 240k-S30 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 1 kN in…
796
Accessory
V-jaws for Mec240g U-Form Vice Grip, 5 kN, for round sample Ø 2-50 mm
Mec240g-BV2
V-Jaws (2-50mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes)
Supplied as 0.5 set = 2 jaws (…
797
Accessory
V-jaws for Mec240k Medium Vice Grip, 2.5 kN, for round samples Ø 2-52 mm
Mec240k-BV2
V-Jaws (2-52mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes)
Supplied as 0.5 set = 2 jaws (…
798
Accessory
Medium Vice Grip - Single Action, 1 kN, 52 mm opening, QC-20 fitting
Mec240k-S50
MEC 240k-S50 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be manualy set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 1…
799
Accessory
Large Single-action Vice Grip, wave-form, 2 kN, QC-20 fitting
432-267-V02
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with wave-form jaws of 78mm wide x 28mm high having an opening of 0 - 6.5 mm. Provides…
800
Accessory
Chisel Point - 12 mm diameter, 5 kN, 5-16 UNC
432-361
Chisel Points probe with angle of of Ø 12mm 60° typically used for puncturing and splitting samples.
Maximum compressive force is 5 kN.
Fitted with a 5-16 UNC female thread for connection to loadcell.