Search results
2151
[Page extract]
ASTM D1871
This test method is used to test the strength of adhesion of single-filament wire to vulcanized rubber compounds. It applies to wire made from brass, bronze or zinc coated steel wire.
2152
[Page extract]
ASTM D4533-11
This test method is an index test used to measure the force required to continue or propagate a tear in woven or non-woven geotextiles by the trapezoid method.
2153
[Page extract]
ASTM D380
ASTM D380 is a set of test methods for determining testing and inspection procedures for rubber hoses e.g. hydraulic hoses and automotive hoses.
2154
Case study
แสดงการเคลือบฟิล์มบางทดสอบการลอก 90 องศา
ความต้องการ Thin Film Center ที่ University of Paisley ทำการวิจัยขั้นพื้นฐานเกี่ยวกับจอแสดงผลแบบยืดหยุ่นและต้องการวิธีการวิเคราะห์การยึดเกาะระหว่างฟิล์มและวัสดุพิมพ์
2155
[Page extract]
ASTM D2659
ASTM D2659 determines the mechanical properties of blown thermoplastic containers under columnar crush conditions at a steady rate of compression. Any container, whether blown commercially or in the laboratory, may be used as the test specimen.
2156
[Page extract]
BS EN ISO 10619-1
BS EN ISO 10619-1 is a test method covering bending tests on rubber or plastics hoses and tubing.
2157
[Page extract]
ISO 8627
Specification of a test method and grading scheme for the stiffness of the tufted area of conventional manual tooth-brushes, together with the relevant information concerning definitions and those concerning testing machines.
2158
[Page extract]
SAE J 1907
This recommended practice defines a procedure for the construction and testing of a 180 deg peel specimen for the purpose of determining the bondability of glass to elastomeric material in automotive modular glass.
2159
[Page extract]
BS ISO 2285
BS ISO 2285 is a test method for determining the tension set under constant elongation of vulcanised rubber or thermoplastic.
2161
Case study
บังคับใช้เจ้าหน้าที่ตำรวจและชุดป้องกัน
ความต้องการ กองกำลังตำรวจที่สำคัญของสหราชอาณาจักรกำหนดให้มีการรับสมัครใหม่ทั้งหมดเพื่อผ่าน 'Job Related Fitness Test' (JRFT) เพื่อให้แน่ใจว่าพวกเขาสามารถตอบสนองความต้องการทางกายภาพที่ต้องเสียภาษีของบทบาทนี้ได้ เจ้าหน้าที่ติดอาวุธต้องไ
2162
[Page extract]
Methods used in ring crush testing
Two principal methods are recognised for RCT, each with specific advantages:
2163
[Page extract]
Standards for extrusion testing
Although there are fewer dedicated standards for food extrusion than for plastics or metals, recognised guidelines help ensure repeatability and comparability. Examples include:
2164
[Page extract]
ASTM D3410 / D3410M
ASTM D3410 determines the compressive properties of polymer matrix composite materials reinforced by high-modulus fibers.
2165
Sensor
AFTI - Torque sensors
Torque sensors
The AFTI and AFG are versatile force and torque indicators designed for use with the Mecmesin range of 'Smart' static and rotary torque sensors.
Readings are displayed as live values with peak-hold function in both clockwise and counter-…
2166
[Page extract]
BS EN ISO 376
BS EN ISO 376:2011 looks at the calibration of force-proving instruments used for the static verification of uniaxial testing equipment. These include tension and compression testing machines.
2167
[Page extract]
ASTM D926-17
ASTM D926 is a test method that covers the determination of plasticity and recovery of unvulcanized rubber by means of the parallel plate plastometer. Uncompounded, compounded, and reclaim rubber may be tested.
2168
Case study
การทดสอบแรงบิด CRC ปิดด้วยแรงลงที่ควบคุมด้วยลม
ความต้องการ ฝาปิดป้องกันเด็ก (CRC) มีหลายแบบและมีความสำคัญในการป้องกันอันตรายจากสารเคมีที่เป็นพิษหรือผลิตภัณฑ์ยา ประเภทของการปิดมักขึ้นอยู่กับบรรจุภัณฑ์และเนื้อหาในภาชนะ ASTM D3475: Standard Classification of Child-Resistant Packages กำหนดประเภ
2169
[Page extract]
ISO 7810
Stipulates test method as per ISO/IEC 10373-1 for determining the Peel Strength of cards.
2170
[Page extract]
ASTM F1044-05
This test method covers shear testing of continuous calcium phosphate coatings and metallic coatings adhering to dense metal substrates at ambient temperatures.
2171
[Page extract]
IEC 60371-2
Part 1 is definitions of general requirements
Part 3 specifications for individual materials
A number of other non-force/torque properties are tested. This is largely about testing of pressure-bonded laminated materials.
2173
[Page extract]
ISO 12236
Specifies a method for the determination of the puncture resistance by measuring the force required to push a flat-ended plunger through geosynthetics.
2174
[Page extract]
SAE J174M
This test procedure is intended to provide a quality control method for checking torque-tension characteristics of non-prevailing torque type threaded steel fasteners 6 through 24 mm nominal diameters.
2175
Case study
การยุติการเชื่อมต่อด่วนแบบแบน
ความต้องการ จำเป็นต้องมีระบบทดสอบเพื่อให้เป็นไปตามข้อกำหนดของมาตรฐานการทดสอบ BS5057 ข้อกำหนดจำเป็นต้องมีการวัดการแทรกครั้งแรกและแรงดึงที่หกบนจอบตัวผู้เข้ากับขั้วต่อตัวเมีย (ตามที่ใช้กันทั่วไปในอุตสาหกรรมยานยนต์สินค้าสีขาวและสีน้ำตาล) ความลึกของ