Search results
851
Accessory
Rubber jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 25mm
Mec227-BG25
Rubber-faced Jaws (10mm x 25mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 6mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
852
Accessory
Float glass plates (10 pieces), 2" x 8" for FINAT 2 Peel Table
PSV15030
A set of 10 pieces of 2" wide x 8" long (51 x 203mm) float-glass plates. Used to mount adhesive specimens on when testing tensile peel strength to the requirements of FINAT and other standards.
For use with the FINAT 2 Assisted Peel Table - part number…
853
Accessory
V jaws for Helixa Precision Fixing Plates
432-602
Reversible V-shaped rubber-faced jaws (90 and 120 degree profiles) for use with precision upper and lower fixing plates (432-600 and 432-601).
854
Accessory
Excel macro for calculating Z-value (M&S requirement)
840-215
A basic Excel macro which can present the data obtained during "test-to-failure" tests to check the security of attachments in the report-format requested by Marks & Spencer (M&S).
855
Accessory
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 100 mm
Mec240k-B100
Blank Jaws (30mm x 100mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
856
Accessory
V-profile jaws for Mec11-50 Scissor Grip, 50 kN, 10 - 48mm diameter
Mec11-50-BV10
V-Jaws (10-48mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes).
Supplied as 0.5 set = 2 jaws…
857
Accessory
Rubber coated jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BG100
Rubber-faced Jaws (40mm high x 100mm wide) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 28 mm.
For specimens, which may get weakened by pinching at the contact-edge of the grip. (e.g. films, filaments, fibres and…
858
Accessory
Diamond coated jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 100 mm
Mec227-BD100
Diamond Jaws (10mm x 100mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 6mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)…
859
Accessory
Pyramid (serrated) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 25 mm
Mec227-BP25
Pyramid Jaws (10mm high x 25mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 8mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals - aluminium, copper, soft steel, paper and…
860
Accessory
Rubber coated jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 60 mm
Mec154-BG
Rubber-faced Jaws (40mm high x 60mm wide) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 32 mm.
For specimens which may get weakened by pinching at the contact-edge of the grip. (e.g. films, filaments, fibres and…
861
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 10kN, 60 x 200 mm
Mec154-BW200
Wave Jaws (60mm x 200mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 22 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…
862
Accessory
Diamond coated jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 50 mm
Mec94-BD50
Diamond Jaws (25mm high x 50mm wide) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 20 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and…
863
Accessory
Upper Torque Fixing Table for Vortex stands
432-321
Upper Torque Fixing Table.
Offers highly versatile holding of specimens when torque testing. Fully adjustable between 10 - 78mm opening to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as standard which screw into…
864
Accessory
Rubber jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 50mm
Mec94-BG50
Rubber-faced Jaws (25mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 18mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
865
Accessory
V-profile jaws for Mec11-50 Scissor Grip, 50 kN, 10 - 48mm diameter
Mec11-50-BV10
V-Jaws (10-48mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes).
Supplied as 0.5 set = 2 jaws…
866
Accessory
Rubber jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 100 mm
Mec227-BG100
Rubber-faced Jaws (10mm x 100mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 4mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
867
Accessory
Bench mounting stand for 'ST' range of mid- and high-range static torque transducers
432-401
Bench mounting stand supplied with all screws used for fixing the 'ST' range of mid- and high-range Static Torque Transducers.
Also equipped with an angled fixing bracket to mount the AFTI display at a convenient viewing angle.
A clearance hole at…
868
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 80 mm
Mec240k-BW80
Wave Jaws (30mm x 80mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
869
Accessory
Round jaws with pyramidal-profile for Mec11-20 Scissor Grip, 20 kN, Ø 25mm x 52mm wide
Mec11-20-BPR
Pyramid surface on Round Jaws (Ø 25mm x 52mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, cardboard). Often used…
870
Accessory
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 30 mm
Mec240k-B
Blank Jaws (30mm x 30mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
871
Accessory
Rubber coated jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 60 mm
Mec154-BG
Rubber-faced Jaws (40mm high x 60mm wide) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 32 mm.
For specimens which may get weakened by pinching at the contact-edge of the grip. (e.g. films, filaments, fibres and…
872
Accessory
Pyramid (serrated) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 100 mm
Mec227-BP100
Pyramid Jaws (10mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 6mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals - aluminium, copper, soft steel, paper…
873
Accessory
Diamond coated jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BD100
Diamond Jaws (40mm high x 100mm wide) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 30 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and…
874
Accessory
Safety guard for fitting to MultiTest 0.5-i/-xt/-dV motorised test stands (1200 mm)
432-680
Mecmesin's standard safety guards are designed to prevent access by the operator to the testing area whilst the test is in progress. Guards feature an aluminium frame with integrated polycarbonate panels to allow the operator to view the test area from…
875
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BW100
Wave Jaws (40mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 30 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…