Search results
1926
[Page extract]
Impact of environmental factors
Temperature and mechanical properties
Temperature can significantly affect tangent modulus:
1927
[Page extract]
Selecting the right running torque testing solution
When specifying a running torque test system, engineers should consider:
1928
Software
ซอฟต์แวร์ Emperor Force
ซอฟต์แวร์ Emperor™ Force ซอฟต์แวร์ที่ใช้งานง่ายพร้อมอิสระที่แทบไม่มีขีดจำกัดในการออกแบบและปรับแต่งการทดสอบแรงดึงและแรงอัดให้เหมาะกับความต้องการของคุณ Emperor™ ได้รับการพัฒนาโดย Mecmesin โดยร่วมมืออย่างใกล้ชิดกับลูกค้าของเรา…
1929
Accessory
Footswitch regulator option
Mec205-PR
Pressure regulator to adjust the air pressure between 1-10 bar.
Useful when a different pressure is required between upper and lower pneumatic grips.
To be ordered and fitted with either Mec205-1 or Mec205-2 Footswitches.
1930
Accessory
QC Type K Adapter, 20 mm F to 5/16 UNC fixing bolt, c/w pin
432-429
QC Female Sleeve Type K c/w cross-pin with 5-16 UNC Fixing Bolt:
Converts a non-QC type grip having a 5-16 UNC fixing thread into a QC type thereby allowing for quick interchange of grips.
1931
Accessory
QC Adapter, type L 32mm (Female) to type C 20mm (Male)
432-623
QC Adapter from Female 32mm to Male Post 20mm c/w cross-pin & locking wheel:
Used on a QC Type L 32mm male post to convert it into a Type C 20mm male post. This then allows the use on 50 kN systems of grips fitted with QC-20 fixings.
1932
Accessory
Footswitch regulator option
Mec205-PR
Pressure regulator to adjust the air pressure between 1-10 bar.
Useful when a different pressure is required between upper and lower pneumatic grips.
To be ordered and fitted with either Mec205-1 or Mec205-2 Footswitches.
1933
Accessory
Extension Rod with nut, 30 mm, 500N, 10-32 UNF
432-116
Extension rod 30mm long supplied with locking nut to ensure alignment of grip. Comprises 10-32 UNF female to 10-32 UNF male threads.
Suitable for use with digital force gauges made from 1990 - 2006.
1934
Accessory
3-Point Bend Jig, 20 kN, Steel, QC-20 fitting
432-266
A simple 3-point bend jig supplied as standard with a 5mm radius upper anvil (QC 20mm female connection) and two adjustable lower anvils also of 5mm radius.
Lower support beam is fitted with QC 20mm female connection suitable for mounting on single- and…
1935
Accessory
‘T’ slot Base Plate
432-294
‘T’ slot base plate (replaces the standard base plate on single-column motorised test stands).
For use with specialist fixtures such as 1kN 3-point Bend Jig (432-294)
Includes ‘T’ bolt fittings.
1936
Accessory
Pyramid (serrated) jaws, 30 x 80 mm, 0.5 set
Mec240k-BP80
Pyramid Jaws (30mm x 80mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1937
Accessory
Trolley pushing fixture, 1 kN
432-405
The Trolley Pushing Fixture has been designed to attach to trolleys and wheelie bins, so that manual handling measurements can be made easily. Typically used with a force gauge grip handle.
1938
Accessory
Interface cable, CFG+, RS232 Jack plug to 9-pin D-type socket
351-077
Connects the CFG+ to a PC for RS232 data transfer. Comprises 2.5 mm jack plug to 9-pin female D-connector.
1939
Accessory
Interface cable, ELS(-S) loadcell to MultiTest 0.5-dV and 1-dV test stands
352-275-V01
Connects the ELS and ELS-S range of loadcells to the MultiTest 0.5-dV and MultiTest 1-dV test stands.
Comprises a 13500mm long cable fitted with a Hirose 6-pin circular loadcell connector and a Binder 12-pin circular test stand connector.
1940
Accessory
Universal expansion module, AFG/AFTI (2006 - now) & Orbis Mk 2/Tornado (2008 - now)
432-127
Allows up to 4-cables to be simultaneously connected to an AFG/AFTI or Orbis/Tornado.
Comprises one 15-pin female D-connector to expansion module equipped with four 15-pin male D-connectors.
Typically used for applications requiring control of test…
1941
Accessory
MDD scale bracket kit
432-160
Bracket Set only.
Used for mounting of a Mitutoyo ABS-type Digital Height Scale to the handwheel-operated Manual Test Stand model MDD.
Note: Height-scale not included
1942
Accessory
Pyramid (serrated) jaws, 30 x 50 mm, 0.5 set
Mec240k-BP50
Pyramid Jaws (30mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1943
Accessory
Pin Chuck, 100 N, 10-32 UNF
432-382
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having 10-32 UNF female threaded hole & 10-32 UNF grub-screw
1944
Accessory
Pneumatic Lift Mechanism to aid testing CRC closures on Vortex
PDV12112
Pneumatic Lift Mechanism to aid operation of Vortex Torque Testers when testing Child-Resistant (CRC) closures.
Raises and lowers the masses which are required as axial load to engage the child-resistant mechanism of closures.
Supplied with 50 N weight…
1945
Accessory
Sample cutter 15 mm wide
PSV13007
Sample cutter for preparing peel and tensile samples of film/paper. Adjustable blade spacing upto 70 mm, or quickly set at 15 mm or 1 inch wide with the width adjustment block.
Includes spare blades, width adjustment block and hardened protective mat on…
1946
Accessory
Interface cable, ELS(-S) loadcell to MultiTest 2.5-dV test stand
352-275
Connects the ELS and ELS-S range of loadcells to the MultiTest 2.5-dV test stand.
Comprises a 650mm long cable fitted with a Hirose 6-pin circular loadcell connector and a Binder 12-pin circular test stand connector.
1947
Accessory
Needle Probe, stainless steel, 2 mm
432-087
The 2mm diameter needle probe is made from stainless steel and has an M3 female thread. It is designed for surface puncture and penetration tests.
Commonly used with extension rod M3 male to 10-32 UNF female ... part number 432-100
1948
Accessory
MDD Horizontal Feet Kit
432-126
Feet for the horizontal operation of an MDD manual test stand. Supplied as a pair.
1949
Accessory
Pin Chuck, 100 N, M6
432-214
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having M6 female threaded hole & M6 grub-screw
1950
Accessory
Pyramid (serrated) jaws, 30 x 100 mm, 0.5 set
Mec240k-BP100
Pyramid Jaws (30mm x 100mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…