Search results
1401
[Page extract]
ISO 178
ISO 178 is a test method for the determination of flexural properties of rigid and semi-rigid plastics. These properties include flexural modulus and flexural strength.
1402
[Page extract]
Speak to an expert
Tensile and compression testing are essential for understanding material behaviour and ensuring that components perform safely and reliably in their intended environment.
1403
[Page extract]
ECT vs BCT
While ECT measures the compressive strength of the board material, the box compression test (BCT) measures the strength
1404
Accessory
Round jaws with pyramidal-profile for Mec11-20 Scissor Grip, 20 kN, Ø 25mm x 52mm wide
Mec11-20-BPR
Pyramid surface on Round Jaws (Ø 25mm x 52mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, cardboard). Often used…
1405
Event
Fundamentals of Food Texture Testing
Texture cannot be controlled unless it is measured in a consistent and repeatable manner.
1406
Case study
Champagne and sparkling wine cork twist extraction effort
Requirement
Solution
Test equipment
1407
Accessory
Round jaws with pyramidal-profile for Mec11-20 Scissor Grip, 20 kN, Ø 25mm x 52mm wide
Mec11-20-BPR
Pyramid surface on Round Jaws (Ø 25mm x 52mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, cardboard). Often used…
1408
[Page extract]
BS EN ISO 205
Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints.
1409
Bundle
ASTM F88 seal strength tester
OmniTest 2.5
BDO25
ASTM F88 covers the measurement of the strength of seals in flexible barrier materials.
1410
[Page extract]
BS EN ISO 527-2
ISO 527-2 specifies the test conditions for determining the tensile properties of moulding and extrusion plastics, based upon the general principles given in ISO 527-1.
1411
Accessory
Pyramid (serrated) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 100 mm
Mec227-BP100
Pyramid Jaws (10mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 6mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals - aluminium, copper, soft steel, paper…
1412
[Page extract]
ASTM D937-97
1.1 This test method covers measuring with a penetrometer the penetration of petrolatum as an empirical measure of consistency.
1413
[Page extract]
EN 22872
EN 22872 specifies two methods for testing complete, filled transport packages for compression resistance.
1414
[Page extract]
ASTM D1710
Among tests for electrical and dimensional (temperature) stability, includes methods for tensile characteristics.
1415
Accessory
Pyramid (serrated) jaws for 20 or 50 kN Wedge Grip, 50 x 35mm, 4 - 16 mm opening
Mec243-BP16
Pyramid Jaws (50mm high x 35mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Jaw opening = 4 - 16mm.
For flat specimens of materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft…
1416
Accessory
Split Mandrel for Stelvin aluminium closure, pneumatic
PDV14181
Suitable for Stelvin aluminium closures.
Pneumatically-operated chuck complete with half-round jaws with wire-eroded faces, for use with Vortex Upper Fixing Plate (432-321). Supplied with pneumatic valves and tubes.
Specify closure diameter when…
1417
Accessory
Extended Dovetail Bracket (for AFG or BFG)
432-326
The extended dovetail bracket provides 70 mm of extra daylight when mounting AFG or BFG force gauges to test stands. Fixing screws included.
Note: maximum load 500N
1418
[Page extract]
Comparisons with elastic modulus
The elastic modulus measures stiffness only within the initial linear elastic range, where deformation is fully recoverable.
1419
Page
Contact service
Need calibration or servicing support?
Whether it’s a Mecmesin product or another brand, our team can help. Complete the form below and one of our Service Engineers will get back to you.
1420
[Page extract]
Key material testing standards
To ensure accuracy and comparability, elongation at break and tensile strength measurements are performed according to recognised industry standards.
1421
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 20 kN, 25 x 50 mm
Mec11-20-BP
Pyramid Jaws (25mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1422
Accessory
Pyramid jaws for Mec11-5 Scissor Grip, 5 kN, 20 x 50mm
Mec11-5-BP
Pyramid Jaws (20mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1423
Accessory
Pyramid (serrated) jaws for 20 & 50kN Wedge Grip, 50 x 35mm, 0 -13mm opening
Mec243-BP
Pyramid Jaws (50mm high x 35mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Jaw opening = 4 - 16mm.
For flat specimens of materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft…
1424
Accessory
Pyramid (serrated) jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 50 mm
Mec227-BP50
Pyramid Jaws (10mm high x 50mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 6mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals - aluminium, copper, soft steel, paper and…
1425
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 20 kN, 25 x 50 mm
Mec11-20-BP
Pyramid Jaws (25mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…