Search results
1351
[Page extract]
Why Mecmesin for removal torque testing
Mecmesin offers manual and automated torque testing solutions designed for packaging manufacturers, quality control teams, and compliance officers.
1352
[Page extract]
Mecmesin equipment for torque to turn testing
Mecmesin offers a range of precision torque test systems, including the OmniTest and
1353
[Page extract]
Mecmesin solutions for Concora crush testing
Mecmesin offers advanced motorised test stands and fixtures for performing CCT in compliance with
1354
[Page extract]
Why choose Mecmesin for elongation and recovery testing
Precision testing across materials
Mecmesin’s systems deliver accurate, repeatable results for textiles, rubber, elastomer
1355
[Page extract]
Mecmesin solutions for compressive modulus testing
Mecmesin provides precision compression testing systems for accurate modulus determination across a wide range of materials and load capacities.
1356
[Page extract]
How is torque to turn testing performed?
Torque to turn testing typically involves mounting the test specimen in a secure fixture, aligning the axis of rotation, and applying torque until the component begins to move.
1357
[Page extract]
Mecmesin solutions for equibiaxial flexure testing
Mecmesin designs and manufactures precision equipment for standards-compliant equibiaxial flexure compression testing, including the concentric ring method. Our systems combine robust mechanical design with advanced control and analysis software.
1358
[Page extract]
Understanding ASTM D2718 standards
The ASTM D2718 standard sets out the procedures for conducting planar shear tests on structural panels using the
1359
Software
VectorPro Lite torque motorised stand
VectorPro® Lite software
Available as an optional extra to Mecmesin’s Vortex-dV motorised torque tester, VectorPro Lite is an advanced data acquisition and plotting software package. Call-up pre-stored test routines, present test data graphically and…
1360
[Page extract]
Mecmesin systems for top-load testing
Vertical load and axial resistance expertise
Mecmesin offers dedicated axial load test systems widely used for
1361
Software
VectorPro Lite software (force instruments)
VectorPro® Lite software
Available as an optional extra to Mecmesin's Digital Force Gauges (VFG, AFG, BFG and CFG+ and VFTI/AFTI Digital Force Indicators, VectorPro Lite is an advanced data acquisition and plotting software package.
Simply select the…
1362
[Page extract]
Best practices for reliable torque testing
Accurate and repeatable torque testing depends on attention to several technical factors.
1363
[Page extract]
Relevant standards for lap shear under compression
International testing standards provide consistency and repeatability for adhesive strength tests, including those involving compressive loading. The following standards are particularly relevant:
1364
[Page extract]
Choosing the right tear testing equipment
Selecting the correct tear tester depends on the type of material, accuracy requirements, testing volume, and available budget.
Factors to consider:
1365
[Page extract]
Choosing the right test standard
Selecting the correct standard depends on:
1366
[Page extract]
Types of edge crush tests and methodologies
TAPPI and ISO standards
ECT is governed by internationally recognised standards that ensure accuracy, repeatability, and comparability of results.
1367
Accessory
Pyramid (serrated) jaws for 20 & 50kN Wedge Grip, 50 x 35mm, 0 -13mm opening
Mec243-BP
Pyramid Jaws (50mm high x 35mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Jaw opening = 4 - 16mm.
For flat specimens of materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft…
1368
[Page extract]
Compression testing standards
Following recognised standards ensures test data is reliable and comparable. Standards specify specimen preparation, testing speeds, calculations and reporting methods.
1369
[Page extract]
Introduction to flat crush test
The flat crush test (FCT) is a recognised method for measuring the resistance of corrugated fibreboard to a compressive load applied perpendicularly to its surface.
1370
Accessory
Square Perforated Aluminium Compression Plate, 200 x 200 mm, QC-20 or QC-32 fitting
Mec36L-200-L6x20
MEC36L-200-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 200mm x 200mm.
Fitted with QC-20mm or 32mm…
1371
Accessory
Pyramid (serrated) jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BP25
Pyramid Jaws (25mm high x 25mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 20 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper…
1372
[Page extract]
Case studies in puncture resistance testing
Protective clothing - A glove manufacturer used high-force puncture testing to optimise material layering, achieving compliance with ASTM F1342 and ISO 13996 while maintaining f
1373
[Page extract]
Types of torque testing methods
Manual torque testing
Manual torque testing uses handheld or bench-mounted torque testers.
1374
Accessory
Square Perforated Aluminium Compression Plate, 200 x 200 mm, QC-20 or QC-32 fitting
Mec36L-200-L6x20
MEC36L-200-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 200mm x 200mm.
Fitted with QC-20mm or 32mm…
1375
[Page extract]
ASTM D6484 / D6484M - 14
ASTM D6484 is a test method that determines the open-hole compressive strength of multidirectional polymer matrix composite laminates reinforced by high-modulus fibers.