Category
Description
The FINAT 2 Assisted Pull-Peel table (90° Peel Test) is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.

The carriage of the peel table is directly driven horizontally by the vertical movement of the test stand crosshead. This maintains a constant peel angle of 90 degrees.

The carriage is equipped with adjustable rails into which float-glass can be inserted. Float-glass is used as a standardised surface onto which the specimen is adhered. Float-glass to be ordered separately (part numbers PSV15030 and PSV15031).

Fitted with an adaptor having QC-20mm female hole
Images
FINAT 2 assisted pull peel table, 90 degree testing
PDV15031 90° peel table - extended
Datasheet
Peel Jigs for test standards (FINAT, ASTM, AFERA, PSTC) DS-1032-03-L00 Peel Jigs for test standards (FINAT, ASTM, AFERA, PSTC) DS-1032-03-L00

Fittings

Hable con un experto sobre accesorios de prueba de fuerza y torque, agarres y accesorios, catálogo completo en línea para PC, tableta y móvil, por Mecmesin

Hablar con un experto

¿Tienes alguna pregunta sobre este accesorio? Póngase en contacto y hable con uno de nuestros ingenieros técnicos de ventas ahora ...

Similar accessories