Search results
Standards
Featured or equivalent test standards for Mecmesin solutions in this section
Term Video
Test summary
This International Standard specifies a method for determining the tensile strength , elongation at a specified load and elongation at break. It is applicable to all types of leather.
Test apparatus
Force testing stand with suitable loadcell capable of measuring displacement while applying a constant speed of grip separation. Complimentary software for recording load and displacement and calculating results.
Grips with minimum length of 45 mm in the direction of the load designed to apply a constant clamping force by mechanical of pneumatic means.
Cutting apparatus
A thickness guage
Preparation
From the sample, cut at least six test pieces to the dimensions given in the standard with the long axis parallel to the backbone, and six test pieces perpendicular to the backbone.
Measure the width and thickness of each test piece as instructed in the standard and calculate mean values for the width and the thickness of the sample.
Test method
Set the jaws of the grips to 50 mm separation for standard size test pieces, or 100 mm separation for large size test pieces, and clamp the test piece securely.
Record the initial grip separation, and start the test stand moving at a constant speed of grip separation at 100 mm/min.
Continue applying force at a constant speed until the sample breaks
Determine the tensile length (Tn) as calculated from:
Tn = F/w.t
Where
F = highest force recorded
w = mean width in mm
t = mean thickness in mm
Percentage elongation at a specified load (El)
El = (L1-L0/L0) x 100
Where
L1 is the separation of the jaws at the specified load
L0 is the initial separation of the jaws
Percentage elongation at break (Eb)
El = (L2-L0/L0) x 100
Thiết bị kiểm tra trực tuyến và trình diễn đào tạo
Vì ngày càng có nhiều người làm việc tại nhà để giảm bớt việc đi lại không cần thiết, các kỹ sư bán hàng kỹ thuật của chúng tôi có thể cung cấp các buổi giới thiệu thiết bị trực tuyến hoặc các buổi đào tạo thông qua cuộc gọi video trên web.
Nếu có thể, hãy gửi mẫu của riêng bạn và đội ngũ bán hàng của chúng tôi sẽ có thể giới thiệu sản phẩm đang được thử nghiệm của chính bạn.
Liên hệ để thảo luận về các yêu cầu của bạn và sắp xếp một buổi giới thiệu hoặc đào tạo trực tuyến.