Category
Part Number
432-615
Description
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (9.5 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
Used to secure a variety of test specimens for torque applications of 1.5 - 10 N.m.
Recommended for use only with 3 and 6 N.m sensors due to the risk of overloading lower-capacity sensors when tightening the chuck.
It has a maximum ⅜" (9.5 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
Used to secure a variety of test specimens for torque applications of 1.5 - 10 N.m.
Recommended for use only with 3 and 6 N.m sensors due to the risk of overloading lower-capacity sensors when tightening the chuck.
Images
Datasheet
3-jaw and 4-jaw Torque Chucks, QC fitting DS-1130-02-L00
Related Parts
Fittings
Weight
255 g
Nói chuyện với một chuyên gia
Có một câu hỏi về phụ kiện này? Hãy liên hệ và nói chuyện với một trong những Kỹ sư Bán hàng Kỹ thuật của chúng tôi ngay bây giờ ...