Shear in tension | Mecmesin

Shear testing in tension (also known as 'lap shear') is commonly used to test adhesives and involves the pulling apart of a material specimen by applying tensile force from opposite sides in a parallel plane. In this way, the material is stressed in a sliding motion. Lap shear testing is typically used where an adhesive bond joins flat surfaces.

The required surfaces may be single, double or multiple. In the case of a single lap shear test, one part is pulled across another at a constant rate. Alternatively, it can be double-shear, where a bonded section is pulled out from between the sections on either side.

Lap joint strength is a function of the materials used, including their absorbency to adhesive, relative elastic properties, and the cohesive properties of the bonding material. The majority of standard test methods are usually tensile, but materials like wood are often tested under compression.

Being able to analyse test result characteristics in fine detail is important where shear failure may occur in either the bonding, the bonded layers or both (adhesion and cohesion). Results for lap shear tests are usually expressed as the applied load divided by the area of the bonded overlap (MPa or N/mm²).

Standards

Featured or equivalent test standards for Mecmesin solutions in this section

BS EN 310

Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

BS EN ISO 314-1

Plywood. Bonding quality. Part 1: Test methods

Test types

Further or specific test types in this section

double lap shear

Lap shear testing is used where an adhesive bond joins flat surfaces.

single lap shear

Lap shear testing is used where an adhesive bond joins flat surfaces.

Term Video

<p><a href="https://videos.sproutvideo.com/embed/189ddab9111ee3c090/66763984e58e1182?bigPlayButton=false&playerTheme=light&playerColor=2f3437&autoPlay=true" class="sproutvideo-lightbox" data-width="640" data-height="640"><img src="https://cdn-thumbnails.sproutvideo.com/189ddab9111ee3c090/66763984e58e1182/0/w_640,h_640,btn_true,btnbg_FFFFFF,btnfg_2f3437/poster.jpg" /></a></p>

Elmas uçlu taşlama ve kesici takım kopma mukavemeti

Case study

Elmas kesme aleti diş kırılma direnci testi

Kontrplak tur kesme testi

Case study

BS EN 310

Kontrplak örneklerin EN314-1'e göre kesilme testi

Elmas uçlu taşlama ve kesici takım kopma mukavemeti

Case study

Elmas taşlama aleti diş kırılma direnci test sistemleri

Kontrplak tur kesme testi

Case study

Lap kesme test sonuçları kontrplak örneklerinin EN314-1 ile karşılaştırılması

Elmas uçlu taşlama ve kesici takım kopma mukavemeti

Kontrplak tur kesme testi

Bir uzmanla konuşun

Bir ürün hakkında sorunuz mu var? Hemen Teknik Satış Mühendislerimizden birinden geri arama isteyin.

Current Your enquiry
Contact information
Tamam

What is your enquiry about?

Sales

Service/Calibration

Support

Do you have 2 minutes to answer a couple of extra questions about your application requirements?

Yes

Not yet

How can we help you?