Search results
901
Case study
Child resistant closures (CRC) mandrel
Customised engineering example
Child Resistant Closures (CRC) require sufficient vertical force to activate the CR locking mechanism prior to torque being applied.
902
Test Frame
Vortex test çerçevesi
Vortex test çerçevesi 10 Nm'ye (90 lbf.in) kadar tork uygulayabilen sağlam bir çift kolonlu test çerçevesi. Tezgah üstü test cihazı olarak kullanmak için kompakt ancak çeşitli test örneklerini kabul edecek kadar uzun ve geniş. Test çerçevesini…
903
Test Frame
Vortex test frame
Vortex test frame
A sturdy twin-column test frame capable of applying torque up to 10 N.m (90 lbf.in). Tall and wide enough to accept a variety of test specimens yet compact to use as a bench-top tester.
View test frame
904
[Page extract]
Loop tack test procedure
Sample preparation
Cut adhesive strips to the required length and width stated in the chosen standard. Condition the samples at the specified temperature and humidity before testing.
905
[Page extract]
Standards for tension testing
Key standards
ISO 527 - Tensile testing of plastics, covering tensile strength, modulus and elongation
AS
906
[Page extract]
How is double lap shear testing performed?
Specimen preparation
Specimens are prepared according to standardised dimensions.
907
[Page extract]
Why choose Mecmesin for flat crush testing
Mecmesin provides precision-engineered flat crush testing solutions designed for accuracy, repeatability, and compliance with ISO, TAPPI, and FEFCO standards.
908
[Page extract]
Why Mecmesin for reverse ratchet torque testing
Mecmesin offers torque testing systems engineered to meet the precise demands of child-resistant closure
909
[Page extract]
Understanding test standards: industry-specific requirements
To maintain consistency and reliability, compressive strength tests are often governed by established standards.
910
[Page extract]
Test setup and equipment
Performing lap shear testing under compression requires careful alignment and use of appropriate fixtures to prevent torsion or uneven load distribution.
911
[Page extract]
Understanding cone penetration testing
Cone penetration testing is a precision method used to determine a material's resistance to penetration by a standardised cone-shaped probe under specific force conditions.
912
[Page extract]
Procedure for tensile testing
While the specifics vary depending on material type and applicable standards, the general procedure includes:
913
[Page extract]
Key standards in tear testing
Compliance with recognised testing standards ensures that results are accurate, repeatable, and comparable across laboratories and production sites. Mecmesin tear testers are designed to meet or exceed major industry requirements.
914
[Page extract]
Testing equipment and techniques
Mandrels
Custom-designed mandrels ensure closures are aligned and secured during testing. Correct mandrel design prevents slippage and eliminates fixture-induced variability.
915
[Page extract]
Types of torque testing equipment
Whether you're validating production output or designing closures in R&D, Mecmesin offers systems to suit every environment.
916
[Page extract]
Standards and compliance for torque testing
Key standards
ASTM D2063 - Specifies torque retention testing for thread closure
917
[Page extract]
Types of torque testing equipment
Whether you're validating production output or designing closures in R&D, Mecmesin offers systems to suit every environment.
918
[Page extract]
What is compression texture testing?
Compression texture testing is a method used to determine how a food product responds when force is applied. It measures properties such as firmness, consistency, and deformability by pressing into the sample with a controlled load.
919
[Page extract]
Mecmesin solutions for corrugated medium testing
Mecmesin offers flat crush testers and fixtures designed to meet TAPPI T 809 requirements.
920
[Page extract]
Introduction to compression testing
Compression testing is a core mechanical test method used to evaluate how materials and products behave when subjected to a compressive load.
921
[Page extract]
How is 180 degree peel testing performed
The test is carried out on a universal testing machine fitted with a suitable peel fixture.
923
[Page extract]
Industry standards for torque to turn testing
There is no single universal standard for all torque to turn testing, but the method aligns with several sector-specific standards. Examples include:
924
[Page extract]
Best practices for rotational shear testing
Consistent methodology, accurate equipment and adherence to relevant standards are essential for meaningful results. Recommended practices include:
925
[Page extract]
Why choose Mecmesin for edge crush testing
Standards-compliant precision testing
Mecmesin’s ECT solutions meet the requirements of both TAPPI T 811 and ISO 3037.