Search results
226
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BW100
Wave Jaws (40mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 30 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…
227
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BW100
Wave Jaws (40mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 30 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…
228
Accessory
Adapter, 5 kN, 5-16 UNC to M10, M to M
432-333
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
229
Accessory
Diamond coated jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BD25
Diamond Jaws (25mm high x 25mm wide) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 20 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and…
230
Accessory
Rubber jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 50 mm
Mec227-BG50
Rubber-faced Jaws (10mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 4mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
231
Accessory
Adapter, 500N, 10-32 UNF to M10, M to M
432-364
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
232
Accessory
Miniature Vice Grip, 100 N, QC-20 fitting
MecS341
Versatile, easy to use, and suitable for small components (eg bonded joints) where access is limited and tensile forces are below 100 N.
Clamping surfaces are machined with pyramid-shaped serrations to ensure optimum gripping force.
The flexible chain-…
233
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 100 mm
Mec240k-BW100
Wave Jaws (30mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
234
Accessory
Rubber jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 100 mm
Mec240g-BG100
Rubber-faced Jaws (30mm x 100mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact…
235
Accessory
Lightweight Pneumatic Plane Grip, Single-action, 200 N, pair, QC-20 fitting
Mec94
A pair of versatile Lightweight Pneumatic Plane Grips especially suitable for holding a variety of materials where the tensile force may be low but the material is sensitive to damage or slippage when clamped.
The adjustable screw-driven rod allows…
236
Accessory
Wave jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 100 mm
Mec240g-BW100
Wave Jaws (30mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = see datasheet for various spans according to the grip body selected.
For flexible but slippy materials which need more surface contact to secure…
237
Accessory
Self-levelling Compression Plate Steel - 156 mm, 50 kN, QC-32 fitting
MecS223g-156
MecS223g - 156mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
238
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 50 mm
Mec240k-BG50
Rubber-faced Jaws (30mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
239
Accessory
V-jaws for 10kN Wedge Grip, for round samples 2 - 10 mm
MecS622-BV
V-Jaws (2-10mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove. For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes). Supplied as 0.5 set = 2 jaws (…
240
Accessory
Self-levelling Compression Plate Steel - 196 mm, 50 kN, QC-32 fitting
MecS223g-196
MecS223g - 196mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
241
Accessory
Fabric Grip, 100 N, 10-32 UNF
432-384
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 100N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
242
Accessory
Pyramid jaws for Mec11-5 Scissor Grip, 5 kN, 20 x 50mm
Mec11-5-BP
Pyramid Jaws (20mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
243
Accessory
Rubber jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 50 mm
Mec227-BG50
Rubber-faced Jaws (10mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 4mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
244
Accessory
Diamond coated jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 40 x 60 mm
Mec83-BD
Diamond Jaws (40mm x 60mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For materials which need a “bite” to secure a…
245
Accessory
Rubber jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 100 mm
Mec240g-BG100
Rubber-faced Jaws (30mm x 100mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact…
246
Accessory
V-jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, for round sample Ø 4-10 mm
Mec83-BV4
V-Jaws (4-10mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes)
Supplied as 0.5 set = 2 jaws (…
247
Accessory
Wave jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 100 mm
Mec240g-BW100
Wave Jaws (30mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = see datasheet for various spans according to the grip body selected.
For flexible but slippy materials which need more surface contact to secure…
248
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 50 mm
Mec240k-BG50
Rubber-faced Jaws (30mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
249
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 30 mm
Mec240k-BW
Wave Jaws (30mm x 30mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
250
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 20 kN, 25 x 50 mm
Mec11-20-BP
Pyramid Jaws (25mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…