Search results
226
Accessory
Diamond coated jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 60 mm
Mec154-BD
Diamond Jaws (40mm high x 60mm wide) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 30 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and…
227
Accessory
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 100 mm
Mec240k-B100
Blank Jaws (30mm x 100mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
228
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 60 mm
Mec154-BW
Wave Jaws (40mm x 60mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 34 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…
229
Accessory
Pyramid (serrated) jaws for 20 & 50kN Wedge Grip, 50 x 35mm, 0 -13mm opening
Mec243-BP
Pyramid Jaws (50mm high x 35mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Jaw opening = 4 - 16mm.
For flat specimens of materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft…
230
Accessory
V-jaws for Mec240k Medium Vice Grip, 2.5 kN, for round samples Ø 2-52 mm
Mec240k-BV2
V-Jaws (2-52mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes)
Supplied as 0.5 set = 2 jaws (…
231
Accessory
Rubber jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BG25
Rubber-faced Jaws (25mm x 25mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 18mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
232
Accessory
V-jaws for 20 & 50kN Wedge Grip, for round samples 3-13 mm
Mec243-BV
V-Jaws (3-13mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes).
Supplied as 0.5 set = 2 jaws…
233
Accessory
FINAT 2 Assisted Pull-Peel Table, 90 degrees, adjustable rails for float glass, QC-20
PDV15031
The FINAT 2 Assisted Pull-Peel table (90° Peel Test) is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of…
234
Accessory
Self-levelling Compression Plate Steel - 96 mm, 50 kN, QC-32 fitting
MecS223g-96
MecS223g - 96mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
235
Accessory
Pyramid (serrated) jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BP25
Pyramid Jaws (25mm high x 25mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 20 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper…
236
Accessory
Rubber jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 40 x 100 mm
Mec83-BG100
Rubber-faced Jaws (40mm x 100mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For fragile samples, which may get weakened by…
237
Accessory
Smooth jaws for Mec11-20 Scissor Grip, 20 kN, 25 x 50 mm
Mec11-20-B
Blank Jaws (25mm x 50mm) - smooth steel jaw. Allows user to machine or affix own surface.
Supplied as 0.5 set = 2 jaws (left & right). Order any combination of 2 half sets of jaws to fit into a pair of MEC11-20 Scissor Grips (upper & lower)
238
Accessory
Self-levelling Compression Plate Steel - 96 mm, 25 kN, QC-20 fitting
MecS223k-96
MecS223k - 96mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
239
Accessory
Wave jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 40 x 100 mm
Mec83-BW100
Wave Jaws (40mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For flexible but slippy materials which need more…
240
Accessory
Smooth jaws for Mec11-5 Scissor Grip, 5 kN, 20 x 50 mm
Mec11-5-B
Blank Jaws (20mm x 50mm) - smooth steel jaw. Allows user to machine or affix own surface.
Supplied as 0.5 set = 2 jaws (left & right). Order any combination of 2 half sets of jaws to fit into a pair of MEC11-5 Scissor Grips (upper & lower)
241
Accessory
FINAT 2 Assisted Pull-Peel Table, 90 degrees, adjustable rails for float glass, QC-20
PDV15031
The FINAT 2 Assisted Pull-Peel table (90° Peel Test) is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of…
242
Accessory
Diamond coated jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 100 mm
Mec227-BD100
Diamond Jaws (10mm x 100mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 6mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)…
243
Accessory
Pyramid (serrated) jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 50 mm
Mec227-BP50
Pyramid Jaws (10mm high x 50mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 6mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals - aluminium, copper, soft steel, paper and…
244
Accessory
Diamond coated jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 80 mm
Mec240g-BD80
Diamond Jaws (30mm x 80mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
245
Accessory
V-jaws for Mec240g U-Form Vice Grip, 5 kN, for round sample Ø 5-50 mm
Mec240g-BV5
V-Jaws (5-50mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes)
Supplied as 0.5 set = 2 jaws (…
246
Accessory
V-jaws for Mec11-20 Scissor Grip, 20 KN, Ø 4 - 15 mm diameter
Mec11-20-BV
V-Jaws (4-15mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
Grip opening to suit round samples of 10 - 48mm diameter where flat jaws do not provide enough surface contact (e.g. wires, rods,…
247
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 30 mm
Mec240k-BD
Diamond Jaws (30mm x 30mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
248
Accessory
Blank (smooth) jaws for Mec154 Heavy-duty Vice Grip, 20 kN, 40 x 100 mm
Mec154-B100
Blank Jaws (40mm high x 100mm wide) - smooth steel jaw.
Opening span = 0 - 34 mm.
Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Supplied as 0.5 set = 2 jaws (left…
249
Accessory
Pyramid (serrated) jaws, 30 x 30 mm, 0.5 set
Mec240k-BP
Pyramid Jaws (30mm x 30mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
250
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 60 mm
Mec154-BW
Wave Jaws (40mm x 60mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 34 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…