Search results
1501
[Page extract]
Differences and similarities to other corrugated tests
While TAPPI T 824 focuses on the intrinsic crush strength of pre-fluted medium, other common corrugated tests measure different performance factors:
1502
[Page extract]
Comparison with other peel tests
A 90° peel test is often used for flexible packaging films.
1503
[Page extract]
Why Mecmesin?
With over 40 years of experience, Mecmesin delivers torque testing systems that are precise, easy to use, and fully supported.
1504
[Page extract]
Introduction to double rip tongue tear testing
Double rip tongue tear testing is a recognised method for assessing the tear resistance of flexible materials including co
1505
[Page extract]
Common challenges and solutions
Misalignment can cause uneven peeling forces.
1506
[Page extract]
Understanding test types
Material testing uses a variety of methods to assess different mechanical properties. Selecting the right test depends on the intended application and relevant standards.
Examples include:
1507
[Page extract]
What is wing tear testing (Winkelmann/Graves method)?
Wing tear testing is a tensile-based method for flexible materials, in which a wing-shaped specimen is subjected to a controlled force until it tears.
1508
[Page extract]
Methods of compressive burst testing
Inflationary burst testing
In this method, internal pressure is gradually increased using air, gas, or liquid until the container ruptures. This is widely applied to:
1509
[Page extract]
Electrical switches and connectors
Switches and connectors may be low-cost simple electro-mechanical devices but they are ubiquitous in millions of products and devices we use every single day.
1510
Product
Hassas otomatik tork test cihazı
Helixa-i
876-501
Helixa-i , bir bilgisayarda çalışan yazılım tarafından kontrol edilen hassas bir tork test cihazıdır. Tork kuvvetlerinin çok küçük olabileceği ve doğruluğun öncelikli olduğu hassas tork uygulamaları için tasarlanmıştır. Çok çeşitli hassas armatürlerle…
1511
[Page extract]
Wines & Spirits
Wine incites passion and has stirred the emotions for centuries. It demands attention. But it’s not just the wine itself which get us talking, it’s how it is packaged too; bottles and corks, bag-in-box containers, aseptic cartons and cans.
1512
Product
Üniversal test makinesi
OmniTest 10/25/50
820-110
Yeni tezgah üstü üniversal test makinelerimiz (UTM'ler), malzemelerin, ürünlerin ve bileşenlerin çekme ve basma testleri için tasarlanmıştır. Bu çok yönlü evrensel test sistemleri, güçlü ve sezgisel VectorPro™ test yazılımımız tarafından desteklenmektedir…
1513
Accessory
V-jaws for Mec11-20 Scissor Grip, 20 KN, Ø 4 - 15 mm diameter
Mec11-20-BV
V-Jaws (4-15mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
Grip opening to suit round samples of 10 - 48mm diameter where flat jaws do not provide enough surface contact (e.g. wires, rods,…
1514
Accessory
Blank (smooth) jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 100 mm
Mec227-B100
Blank Jaws (10mm x 100mm) - smooth aluminium jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 6mm.
Supplied as 0.5 set = 2 jaws (left…
1515
Accessory
Mounting plate for QC-20 Male Post on 50 kN systems
432-622
Allows QC type C Adapter (20mm Male Post) to be fitted directly to the base of 50 kN test systems.
Used when QC-20 grips and fixtures are in long-term use on 50kN test stand.
Supplied with 6 screws of M6 thread.
1516
Accessory
Blank (smooth) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 50 mm
Mec227-B50
Blank Jaws (10mm x 50mm) - smooth aluminium jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 6mm.
Supplied as 0.5 set = 2 jaws (left…
1517
Accessory
Set of 4 fixing pegs for torque testers - 100mm high
432-250
Set of 100mm high extended-length gripping pegs.
These gripping pegs have a soft-rubber sleeve to clamp and keep taller samples secure and vertically aligned during torque testing.
Pegs are fitted with an M6 thread and attach to upper and lower…
1518
Accessory
QC Type M Loadcell Mounting Plate, 13 mm slot c/w M6 bolt for 100 N and 200 N S-beam loadcells
432-452
QC Type M Loadcell Mounting Plate c/w M6 bolt.
Fitted with 13 mm slot to suit 100 N and 200 N S-beam loadcells. The M6 bolt is used to secure the mounting plate onto the loadcell so that a QC type C Male Post (432-284) can be affixed to the loadcell.
1519
Accessory
V-jaws for Mec11-20 Scissor Grip, 20 KN, Ø 4 - 15 mm diameter
Mec11-20-BV
V-Jaws (4-15mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
Grip opening to suit round samples of 10 - 48mm diameter where flat jaws do not provide enough surface contact (e.g. wires, rods,…
1520
Accessory
Blank (smooth) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 25 mm
Mec227-B25
Blank Jaws (10mm x 25mm) - smooth aluminium jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 8mm.
Supplied as 0.5 set = 2 jaws (left…
1521
Accessory
QC Type G Loadcell Mounting Plate, 25 mm slot c/w M16 bolt for 25 kN S-beam loadcell
432-288
QC Type F Loadcell Mounting Plate c/w M16 bolt.
Fitted with 25 mm slot to suit 25kN S-beam loadcell. The M16 bolt is used to secure the mounting plate onto the loadcell so that a QC type C Male Post (432-284) can be affixed to the loadcell.
1522
Accessory
Blank (smooth) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 100 mm
Mec227-B100
Blank Jaws (10mm x 100mm) - smooth aluminium jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 6mm.
Supplied as 0.5 set = 2 jaws (left…
1524
Accessory
QC Type F Loadcell Mounting Plate, 25 mm slot c/w M12 bolt for 2.5 kN, 5 kN and 10 kN S-beam loadcells
432-287
QC Type F Loadcell Mounting Plate c/w M12 bolt.
Fitted with 25 mm slot to suit 2500N - 10kN S-beam loadcells. The M12 bolt is used to secure the mounting plate onto the loadcell so that a QC type C Male Post (432-284) can be affixed to the loadcell.
1525
Accessory
Blank (smooth) jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 50 mm
Mec94-B50
Blank Jaws (25mm high x 50mm wide) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 20 mm.
Supplied as 0.5 set = 2 jaws (left…