Search results
1326
Accessory
Pyramid (serrated) jaws for 20 or 50 kN Wedge Grip, 50 x 35mm, 4 - 16 mm opening
Mec243-BP16
Pyramid Jaws (50mm high x 35mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Jaw opening = 4 - 16mm.
For flat specimens of materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft…
1327
Accessory
Needle Probe, stainless steel, 2 mm
432-087
The 2mm diameter needle probe is made from stainless steel and has an M3 female thread. It is designed for surface puncture and penetration tests.
Commonly used with extension rod M3 male to 10-32 UNF female ... part number 432-100
1328
Accessory
Pyramid jaws for Mec11-5 Scissor Grip, 5 kN, 20 x 50mm
Mec11-5-BP
Pyramid Jaws (20mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1329
Accessory
Diamond-coated Inset jaws, 0.5 set
Mec9-EBD
MEC9-EBD Diamond Jaws
Diamond-coated Inset jaws of 37 mm height x 15 mm width, 0.5 set. For fitting into the carrier of the MEC9 Thin Wire Grip.
Used when jaws need to bite into a soft material to clamp tightly and reduce the risk of slippage.(e.g. soft…
1330
Accessory
Modified Large Wedge Grip, 1 kN, 5-16 UNC
432-212
The Modified Large Wedge Grip has a short body with long jaws to be able to securely hold S-spring press-studs ('poppers') when carrying out pull-off "test-to-failure" tests.
Typically used in conjunction with the 'Popper Cam Base' Textile Fixture (432-…
1331
Accessory
Self-levelling Compression Plate Steel - 56 mm, 25 kN, QC-20 fitting
MecS223k-56
MecS223k - 56mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1332
Accessory
16 mm Crosshead Extension
432-307
The 16mm dovetailed crosshead-extension allows the loadcell on a single-column MultiTest stand to be positioned further from the column to accommodate larger test samples or deeper grips.
Load rating of test stand is reduced by 25%.
1333
Accessory
Pyramid (serrated) jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 50 mm
Mec240g-BP
Pyramid Jaws (30mm high x 50mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip…
1334
Accessory
Float-glass Plates for peel testing on FTP-H1, set of 5
432-651
Set of 5 pieces of Float-glass Plates having 2" width x 5" length (51mm x 127mm). Used for preparing test specimens of pressure-sensitive adhesive tapes and films for testing in accordance with international standards. FINAT, ASTM D3330, PSTC 101 etc…
1335
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 10 kN, 25 x 100 mm
Mec11-20-BP100
Pyramid Jaws (25mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall. By using 100 mm width jaws tensile force is reduced to 10kN.
For materials which need a “bite” to secure a good grip (e.g. soft metals {…
1336
Accessory
Large Chain Link Assembly (short), 2.5 kN, 5-16 UNC
PSV8057
The Large Chain Link Assembly (short length) is fitted with a 5-16 UNC female thread and supplied with a male grub-screw.
It is fixed to other grips thereby allowing a flexible connection, which is often used for providing alignment when pulling large…
1337
Accessory
Compression Plate, Nickel-plated, Vented by Holes & Cone, 50 mm, 10-32 UNF
432-347
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1338
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 30 mm
Mec240k-BW
Wave Jaws (30mm x 30mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
1339
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 60 mm
Mec154-BW
Wave Jaws (40mm x 60mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 34 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…
1340
Accessory
Footswitch regulator option
Mec205-PR
Pressure regulator to adjust the air pressure between 1-10 bar.
Useful when a different pressure is required between upper and lower pneumatic grips.
To be ordered and fitted with either Mec205-1 or Mec205-2 Footswitches.
1341
Accessory
38 mm Crosshead extension only
432-508
The dovetailed crosshead-extension allows the loadcell on a single-column MultiTest stand to be positioned further from the column to accommodate larger test samples or to fit deeper grips without hitting the column.
Load rating of the test stand is…
1342
Accessory
Pyramid (serrated) jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 50 mm
Mec240g-BP
Pyramid Jaws (30mm high x 50mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip…
1343
Accessory
Self-levelling Compression Plate Steel - 196 mm, 25 kN, QC-20 fitting
MecS223k-196
MecS223k - 196mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1344
Accessory
Pyramid (serrated) jaws for 20 & 50kN Wedge Grip, 50 x 35mm, 0 -13mm opening
Mec243-BP
Pyramid Jaws (50mm high x 35mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Jaw opening = 4 - 16mm.
For flat specimens of materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft…
1345
Accessory
Self-levelling Compression Plate Steel - 156 mm, 25 kN, QC-20 fitting
MecS223k-156
MecS223k - 156mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1346
Accessory
FPT T-Peel Vice-Grips (pair) fitted with 25 mm rubber jaws
432-642
Double-action vice grips with rubber-faced jaws, typically for peel-testing on the FPT-H1 horizontal tester. 8 mm QC fitting. Sold as a pair.
A Lightweight Single-action Vice Grip used for peel and delamination testing of pressure-sensitive adhesives…
1347
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 20 kN, 25 x 50 mm
Mec11-20-BP
Pyramid Jaws (25mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1348
Accessory
Float glass plates (10 pieces), 2" x 8" for FINAT 2 Peel Table
PSV15030
A set of 10 pieces of 2" wide x 8" long (51 x 203mm) float-glass plates. Used to mount adhesive specimens on when testing tensile peel strength to the requirements of FINAT and other standards.
For use with the FINAT 2 Assisted Peel Table - part number…
1349
Accessory
Pyramid-form jaws for 50 kN Scissor Grip, 50 kN, 50 x 100 mm
Mec11-50-BP
Pyramid Jaws (50mm x 100mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1350
Accessory
Pyramid (serrated) jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BP100
Pyramid Jaws (40mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 13 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper…