Search results
2526
[Page extract]
BS EN ISO 13262
BS EN ISO 13262 is test method to determine the tensile strength of seams on thermoplastics spirally-formed structured-wall pipes.
2527
Case study
Elektrik konnektörü takma ve çekme kuvvetleri
Özel mühendislik örneği Delikli veya çukurlu tırnaklara ('maça terminalleri' olarak da bilinir) takılan elektrik konektörleri sağlam ancak pratik bir uyum sağlamalıdır.
2528
[Page extract]
BS EN ISO 22088-2
BS EN ISO 22088-2 is a test method for determining the environmental stress cracking of plastics.
This has replaced BS EN ISO 6252:1998
2529
[Page extract]
BS EN ISO 16409
Describes performance criteria for manual interdental brushes with a round cross-section of the brush head and consisting of a wired stem with inserted filaents.
Of particular interest is the Stem Retention Force (sections 5.4 and 7.6)
2530
[Page extract]
ISO 505
ISO 505 specifies a method of test for the measurement of the propagation resistance of an initial tear in textile conveyor belts, either in full thickness or of the carcass only.
2531
[Page extract]
ISO 7623
ISO 7623 specifies a method for determining the bond strength of metal cords to their surrounding coating, either in the initial state or after thermal treatment.
2532
[Page extract]
ISO 13935-1
ISO 13935-1:2014 specifies a procedure to determine the seam maximum force of sewn seams when the force is applied perpendicularly to the seam. ISO 13935-1:2014 specifies the method known as the strip test.
2533
[Page extract]
ISO 9073-3
Application of a force longitudinally to a test piece of a specified length and width at a constant rate of extension. Determination of values for breaking strength and elongation from the recorded force-elongation curve.
2534
[Page extract]
ASTM D3164
Test method ASTM D3164 is used to produce shear strength data for joints to compare adhesives or evaluation surface treatments. Shear joints impose uniform stresses across the bond area which results in the highest possible joint strength.
2535
[Page extract]
Force Testing
Force testing is a way of determining how an object will react when it is subjected to tensile or compressive loads - either during its normal operation or when being pulled/pushed unti
2536
[Page extract]
ASTM C1292
This test method covers the determination of shear strength of continuous fiber-reinforced ceramic composites (CFCCs) at ambient temperature.
2537
[Page extract]
ASTM D6264 /D6264M-17
In ASTM D6264 a quasi-static indentation (QSI) test method is used to obtain quantitative measurements of the damage resistance of a continuous-fibre-reinforced composite material to a concentrated indentation force
2538
[Page extract]
ASTM D2918
This test method provides data for assessing the durabilities of adhesive joints by means of T-peel type specimens stressed in contact with air, air in equilibrium with certain solutions, water, aqueous solutions, or other environments at various temper
2539
[Page extract]
BS EN ISO 4074
BS EN ISO 4074:2002 specifies the minimum requirements and the test methods to be used for condoms made from natural rubber latex which are supplied to consumers for contraceptive purposes and to assist in the prevention of sexually transmitted infectio
2540
[Page extract]
ASTM C1161
This test method covers the determination of flexural strength of advanced ceramic materials at ambient temperature. Four-point and three-point loadings with prescribed spans are the standard.
2541
Location
Mecmesin/PPT Group (Thailand)
PPT Group Asia Co. Ltd
252/119 (B6) 24th Floor
Muang Thai - Phatra Complex Tower B
Ratchadapisek Road
Huai Khwang
Bangkok 10310
Thailand
2542
Case study
Duman bombası kapsülü bütünlüğü
Özelleştirilmiş mühendislik örneği
Bir sis bombası üreticisi, kapak çekme gücünü test etmek için bir araca ihtiyaç duyuyordu. Buradaki özel zorluk, pürüzsüz metal silindiri 5 kN'ye kadar çekme kuvveti için kavramaktı.
2543
[Page extract]
ASTM F1044-05
This test method covers shear testing of continuous calcium phosphate coatings and metallic coatings adhering to dense metal substrates at ambient temperatures.
2544
[Page extract]
BS EN 13393
This European Standards specifies the dimesinsions and physical properties od a range of edge protectors which are used in conjunction wuth tensional strapping
2545
Case study
İmbik ambalaj 90 derece soyma ve kapak dayanımı testi
gereklilik Gıda ambalajlama endüstrisinin esnek malzemelerdeki ince delikler, esnek çatlaklar ve sızıntılar ve imbikli esnek kapaklı ambalajların contaları hakkında uzun zamandır endişeleri vardı.
2546
[Page extract]
ASTM C165
1.1 This test method covers two procedures for determining the compressive resistance of thermal insulations.
2547
[Page extract]
SAE AS1310B
This SAE Aerospace Standard (AS) is intended for use by those involved in the design of aircraft, missile, or space systems, and their support equipment to define the various type of fastener torque.
2548
[Page extract]
ASTM D 2979
1.1 This test method covers measurement of the pressure sensitive tack of adhesives.
2549
[Page extract]
BS 2782-12: 1210A to C
BS 2782-12: Method 1210A to C specifies a test method for testing the longitudinal tensile properties of glass-reinforced thermosetting plastics (GRP) pipes.
2550
Case study
Sıralı solunum filtresi çekme testi
Özel mühendislik örneği Bir sıralı tıbbi cihazdan çekildiğinde bir solunum filtresinin çıkarma kuvvetini test etmek için gerekli bir filtrasyon ürünleri üreticisi.