Search results
376
Accessory
MultiTest 2.5 bellows assembly (500 mm)
432-471
Optional bellows for the MultiTest 2.5 range of single-column test stands. Used to protect against dust and particle ingress and splash into the column.
Note that fitting of bellows reduces throat depth on test stand by 18mm.
Order with a MultiTest 2.5…
377
Accessory
Cable Cam Grip (small), serrated, 1 kN, 10-32 UNF
432-390
Cable Cam Grip - serrated, small
Designed for holding insulated cables and wire. The sample is secured by the cam, which self-tightens as a load is applied and spreads the load evenly.
Serrated cams are preferred for materials which may be slippy and…
378
Accessory
Dual Footswitches (non-locking type) for pneumatic grips
Mec205-1
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-1:
Non-locking dual footswitches open the jaws of the pneumatic grip by pressing the foot pedal…
379
Accessory
Eccentric Roller Grip - pyramid (serrated) roller, 1 kN, QC-20 fitting
Mec7-1
MEC7-1 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
380
Accessory
U-form Pneumatic Vice Grip - Single Action, 5 kN, Pair, QC-20 fitting
Mec83
MEC 83 (body only) :
A pair of pneumatically-operated, Single-action U-form Vice Grips with a standard opening of 0-10mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manually-adjusted jaw holder + 1 pneumatic piston…
381
Accessory
Double Cam Grip (small serrated), 500 N, 10-32 UNF
432-387
The Small Double Cam Grip is designed for holding components into which the serrated faces can bite into the material and secure tightly eg. insulated cables and wire.
The specimen is secured between the 2 cams, which self-tighten as a load is applied…
382
Accessory
Assisted Pull-Peel Table 90 Degree, 500 N
432-051
The Assisted Pull-Peel table is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of the peel table is directly…
383
[Page extract]
Emerging standards and future developments
Mechanical torque testing continues to evolve alongside changes in manufacturing and material science. Key developments include:
384
Software
VectorPro Lite torque motorised stand
VectorPro® Lite software
Available as an optional extra to Mecmesin’s Vortex-dV motorised torque tester, VectorPro Lite is an advanced data acquisition and plotting software package. Call-up pre-stored test routines, present test data graphically and…
385
Product
Otomatik sürtünme, soyulma ve yırtılma test cihazı
FPT-H1
817-001
FPT-H1-i , bir bilgisayarda çalışan yazılım tarafından kontrol edilen tam özellikli bir test sistemidir. Doğru ve kullanımı kolay , çeşitli malzemelerin sürtünme, soyulma ve yırtılma katsayısını test etmek için özel olarak tasarlanmıştır.
386
Case study
Cap removal test of plastic vial
Requirement
The customer approached Mecmesin with a specification to pull-off the cap of a pharmaceutical phial. The test equipment needed to be simple to use and able to perform repeatable tests.
387
Event
Packaging: Edge Crush & Carton Crush testing
The Edge Crush Test (ECT) and Carton Crush Test (CCT) are codified international test methodology. They are used in the packaging industry to assess the strength and durability of corrugated boxes or paperboard materials and others.
388
Product
Motorlu Çekme Test Cihazı
Alluris FMT-W40
PSV21018
FMT-W40, motorlu bir kablo terminali çekme test cihazıdır. 500N (110 lbf) veya 1000N (220 lbf) 'ye kadar gerilme mukavemeti kapasitesine sahip 2 modeli mevcuttur. Sağlamdır, kompakttır ve tezgah üzerinde çok az yer kaplar. Minimum eğitimle kullanım…
389
Event
Wire Terminal Strength & Crimp Testing Webinar
The only way of really knowing the strength of a crimped terminal is to pull it.
390
Case study
Aircraft brake unit spring testing
Requirement
The Aircraft Wheels and Brakes department at British Airways plc are responsible for the repair and overhaul of the aircraft brake units on the Boeing 737, 747, 757, 777 and Airbus A319, A320 and A321 aircraft.
391
[Page extract]
Introduction to compressive burst testing
Compressive burst testing is a specialised method for determining the maximum internal pressure a container can withstand before structural failure.
392
Event
Live Demonstration: Face mask strength testing & Syringe plunger breakaway force testing
Medical device testing ensures patient safety, regulatory compliance, performance, quality, usability, claims examination, and post-market safety.
393
Case study
Measuring shear strength of loose building materials
Customised engineering example
The shear strength of compacted materials (e.g. soil and sand) can be awkward to test.
394
[Page extract]
ASTM F2193-02
These specifications and test methods provide standard specifications that specify material, labeling, and handling requirements for components used in surgical fixation of the spinal skeletal system such as metallic spinal screws, spinal plates, and sp
395
Event
Live Demonstration: Face mask strength testing & Syringe plunger breakaway force testing
Medical device testing ensures patient safety, regulatory compliance, performance, quality, usability, claims examination, and post-market safety.
396
[Page extract]
Industry applications of tension testing
Manufacturing and product development
In engineering and manufacturing, tension testing verifies the performance of raw materials, components and finished products.
397
[Page extract]
Torque systems
Do you need a level of accuracy and repeatability which just cannot be achieved by manual testers? Do you want to reduce testing time and increase throughput for operators when performing batch tests?
398
Case study
Medical sharps bin puncture resistance
Customised engineering example
International standards (ASTM F2132, BS 7320, BS 23907) specify the puncture resistance of medical sharps containers.
399
Event
Wire Crimp & Weld Testing Webinar
The only way of really knowing the strength of a crimped terminal is to pull it.
400
Case study
Top-load testing PET bottles
Requirement
Esterform Packaging manufacture more than a million PET bottles and preforms per day for major processors of bottled water, juices, soft drinks, dairy and household products.