Search results
1076
Accessory
Inverted Chisel Point, Ø 12 mm, 5 kN, 5-16 UNC
432-357
For compression testing of cylindrical or wire specimens up to 5 kN.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 5-16 UNC female thread for connection to loadcell
1077
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+2Ko
MEC 240k- S20+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow the test specimen…
1078
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1079
Accessory
Heavy-duty Belt Grips, 10 kN, QC-20 fitting
432-277
Heavy-duty Belt Grips are designed for tensile testing of high strength belts and straps such as conveyor belts, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are…
1080
Accessory
Inverted Chisel Point - Ø 8 mm, 500 N, 10-32 UNF
432-356
For compression testing of cylindrical or wire specimens up to 500 N.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 10-32 UNF female thread for connection to loadcell
1081
Accessory
FINAT 9 Loop-Tack Test Fixture (lower), 200 N, QC-20
PDV13016-A
The FINAT 9 Loop Tack Test Fixture (lower) is fitted to the anvil plate of a motorised test stand.
It comprises a dedicated holder for 25mm x 75mm float glass onto which the adhesive-coated test strip is fixed according to the requirements of the FINAT…
1082
Accessory
Large Chain Link Assembly (short), 2.5 kN, 5-16 UNC
PSV8057
The Large Chain Link Assembly (short length) is fitted with a 5-16 UNC female thread and supplied with a male grub-screw.
It is fixed to other grips thereby allowing a flexible connection, which is often used for providing alignment when pulling large…
1083
Accessory
Heavy-duty Textile Grip, 50 kN, QC-32 fitting
432-434
Heavy-duty Textile Grips are designed for tensile testing of high strength fabrics, textiles and webbing, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are distributed,…
1084
Accessory
Mettler Toledo RS-P26 printer (Euro)
432-503
A basic ticket printer with simple statistical analysis manufactured by Mettler Toledo.
Communicates with Mecmesin force gauges via RS232 serial link - order interface cable separately.
Supplied with mains-power adaptor 220V with plug (2-pin round)
Uses…
1085
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+Ko
MEC 240k +kO (body only) :
A pair of pneumatically-operated, Single-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
1086
Accessory
Lever-operated Cam Grip (small serrated), 500 N, 10-32 UNF
432-383
The small Lever-operated Cam Grip is designed with a plated 30mm wide roller cam to self-tighten as a load is applied to a sample, spreading the load evenly. The lever also allows for quick insertion and release of samples.
Fitted with a 10-32 UNF female…
1087
Case study
Primat gücü ve kırığı ısırır
gereklilik Hull York Tıp Fakültesi, Anatomik ve Beşeri Bilimler Merkezi'nde insan anatomisi ve evriminde araştırma ve öğretimi birleştirir.
1088
Case study
ISBT spor şapkası dönme testi
gereklilik Uluslararası İçecek Teknolojisi Uzmanları Derneği (ISBT) alkolsüz içeceklerin ve içeceklerin teknik ve bilimsel yönleri için gönüllü uygulama kodları yayınlamaktadır.
1089
[Page extract]
What is the Concora crush test?
Definition and overview
The Concora Crush Test (CCT) is a standardised method used to measure the crush strength of corrugated medium, specifically the fluted inner layer of corrugated board.
1090
[Page extract]
Introduction to strip method tensile testing
Among the range of tensile testing techniques, the strip method is widely recognised for its accuracy and repeatability.
1091
[Page extract]
Tools (calibration related)
To maintain consistent performance and accuracy, tools must be checked regularly.
1092
[Page extract]
Introduction to extrusion testing
Extrusion testing is an essential method in the food industry for measuring the texture and flow behaviour of semi-solid and visc
1093
[Page extract]
Understanding the stress-strain curve
The stress-strain curve is a primary tool for tensile strength analysis. It shows how a material responds to an increasing tensile load, providing detailed insights into its mechanical properties.
1094
[Page extract]
Standards and compliance
International standards ensure penetration and puncture testing is performed consistently for reliable and comparable results.
Key examples include:
1095
[Page extract]
Importance of puncture and shear resistance testing
Puncture and shear resistance testing is a critical quality assurance process for materials used in packaging, textiles, industrial manufa
1096
[Page extract]
Why is flexural strength testing important?
Flexural strength testing provides engineers, designers, and researchers with essential insights into how a material responds to bending forces.
1097
[Page extract]
Frequently asked questions
How do I select the right fixture for my material?
Fixture selection depends on specimen dimensions, material type, and the relevant standard.
1098
[Page extract]
Why is compression texture testing important in the food industry?
Texture is often as important as flavour in determining consumer preference.
1099
[Page extract]
Introduction to puncture resistance testing
Puncture resistance testing determines how well a material can withstand penetration from a sharp or pointed object.
1100
[Page extract]
Applications in industrial settings
Insertion and withdrawal testing is not limited to electrical connectors. It is used to validate the performance of: