Search results
2476
[Page extract]
ASTM D1938
ASTM D1938 covers the determination of the force necessary to propagate a tear in plastic film and thin sheeting by a single-tear method. It rates the tear-propagation resistance of various plastic films and thin sheeting of comparable thickness.
2477
[Page extract]
SAE USCAR-38
This specification defines basic test methods and requirements for ultrasonically welded cable termination type connections.
2479
Case study
ISO 11608-3'e göre önceden doldurulmuş ilaç kartuşlarının kırılma ve sürdürme kuvveti testleri
gereklilik İnsülin gibi ilaçların dağıtımı için mekanik kalem enjektörler, geleneksel şişe ve şırınga yöntemine göre artan bir kabul görmüştür.
2480
[Page extract]
IFI 543
This standard provides a test method for determining the torque-tension relationship on both external and internal threaded fasteners for the purpose of measuring the frictional characteristics of the threaded fasteners.
2481
[Page extract]
ASTM D3787
This test method describes the measurement for bursting strength with a ball burst strength tester of textiles or garments that exhibit a high degree of ultimate elongation.
2482
[Page extract]
BS EN 17665
The Directive (EU) 2019/904 “on the reduction of the impact of certain plastic products on the environment” introduces the requirement that plastic caps and lids of single use plastic beverage containers up to 3 l capacity shall remain attached to the c
2483
Case study
Kutu ezilme testi (BCT) ve transit ambalaj sıkıştırma testi
Özelleştirilmiş mühendislik örneği Tüketici ve transit ambalaj endüstrileri için kutular mümkün olduğu kadar hafif olmalı, aynı zamanda içeriklerini muhafaza etme ve koruma sağlamalı ve aynı zamanda hizmette nakliye, taşıma ve istifleme gereksi
2484
Case study
Seed bottle closure torque testing
Requirement
The Royal Botanic Gardens, Kew, have undertaken an international conservation initiative to preserve seed specimens of over 24,000 plant species, protecting them from extinction at the Millennium Seed Bank at Wakehurst Place, West
2485
[Page extract]
ISO 12048
Specifies a method for testing the resistance to compression of complete, filled transport packages and a method for carrying out a stacking test on complete, filled transport packages using the same apparatus.
2486
Event
Medical Device Testing: Needle sharpness and syringe actuation testing (with 21 CFR Part 11 compliance)
Hypodermic needles are tested to determine their efficacy in piercing elastomer closures on vials and how their design influences the ease of insertion into the patient's skin, influencing pain and skin trauma.
The smooth and consistent operat
2487
Case study
Kapatma torku doğrulaması
gereklilik Müşterinin bir dizi Tornado kapatma tork test cihazı vardı ve üniteleri Mecmesin'e veya onaylı bir laboratuvara iade etmeye gerek kalmadan düzenli validasyon kontrolleri yapmak istedi.
2488
[Page extract]
ISO 252
ISO 252 specifies two test methods, A and B, for determining the adhesion strength between constitutive elements of a conveyor belt, i.e. between plies and between covers and carcass.
2489
[Page extract]
BS EN ISO 1806
This standard specifies a method of determining the mesh breaking force of netting for fishing.
2490
Case study
Düz Hızlı Bağlantı Sonlandırma
gereklilik BS5057 test standardının gereksinimlerini karşılamak için bir test sistemine ihtiyaç duyuldu.
2491
[Page extract]
ISO 813
ISO 813 specifies a method for the determination of the adhesive strength of a vulcanized or thermoplastic rubber bonded to a rigid substrate, using a test piece comprising a strip of rubber bonded to a single plate of rigid material.
2492
[Page extract]
SAE J 1907
This recommended practice defines a procedure for the construction and testing of a 180 deg peel specimen for the purpose of determining the bondability of glass to elastomeric material in automotive modular glass.
2493
[Page extract]
BS EN 12814-4
BS EN 12814-4 is a peel test method for testing welded joints of thermoplastics semi-finished products.
2494
Case study
Dış müdahale belirgin kapaklar için tork test cihazı
gereklilik Elopak, şişe kapakları üzerinde kurcalamaya dayanıklı contaların manuel olarak test edilmesi için ekipman gerektirdi, ancak şişe mevcut değildi. Ünite bir dizi farklı ebatta kapsama sahip olmalıdır.
2495
[Page extract]
TAPPI T 556
This procedure is used to measure the bending resistance of paper and paperboard in the machine and cross machine directions, by determining the bending resistance in mN of a 38mm (1.5in) wide vertically clamped sample, at 15o or 7.5o deflection.
2496
Case study
Bow attachment pull-off test on clothing
Requirement
The customer was a supplier to major UK clothing retailer Marks & Spencer, who stipulate that all fasteners and attachments must be tested to failure.
2497
[Page extract]
BS ISO 11752
BS ISO 11752 is a test method for determining the compressibility of flexible cellular polymeric materials.
2498
[Page extract]
BS 6079-1
BS 6079-1 aims to help people and organizations achieve a desired outcome of a project efficiently and effectively, as well as to contribute to the learning within projects and so continually improve their organization’s project management capability.
2499
Event
Essentials of Cork Pull & Cork Elasticity Testing
Cork stoppers are extremely successful wine bottle closures that have been in use from ancient times.
2500
Case study
Enjeksiyon kalıplı montaj bütünlüğü
Özel mühendislik örneği Plastik enjeksiyon kalıplı alt montajlar genellikle bir araya getirilir veya kaynak yapılır ve bütünün bütünlüğü birkaç noktada test edilmelidir.