Search results
2451
[Page extract]
BS EN 12814-6
BS EN 12814-6 is a low temperature tensile test method for testing welded joints of thermoplastics semi-finished products.
2452
[Page extract]
BS EN ISO 4074
BS EN ISO 4074:2002 specifies the minimum requirements and the test methods to be used for condoms made from natural rubber latex which are supplied to consumers for contraceptive purposes and to assist in the prevention of sexually transmitted infectio
2453
[Page extract]
BS EN ISO 10066
BS EN ISO 10066 is a test method for determining creep in tension of flexible cellular polymeric materials.
2454
Case study
Wall-mounted air freshener destructive loading evaluation
Requirement
The customer wished to apply a controlled load of 350N to a wall mounted air freshener, replicating the effect of a child standing on it. The load needed to be applied in turn to 4 different planes on the product, e.g.
2455
[Page extract]
*corp 01M-01-225
Determination of the Elongation, Recovery and Modulus of Elastic Fabrics.
A fabric specimen of specified dimensions is extended at a constant rate to a specified force for three cycles.
2456
Case study
Hijyenik atık kutusu kapatma testi
Özel mühendislik örneği Hijyenik bertaraf tenekesi üreticisi, bir döner emme mekanizmasına sahip bez (bebek bezi) bertaraf ünitesi ile bize geldi.
2457
[Page extract]
Standards for yield point testing
Yield point testing protocols are defined by recognised international standards, including:
2458
[Page extract]
USP <381>
This chapter applies to closures used for long-term storage of preparations defined in the general test chapter Packaging and Storage Requirements á659ñ, Injection Packaging.
2459
[Page extract]
ISO 23910
ISO 23910 specifies a method for determining the stitch tear resistance of leather. It can be used on all leathers but is particualy suitable for leathers over 1.2 mm in thickness
2460
[Page extract]
Compression
Compression tests are performed to evaluate the performance of a material or component under gradually increasing compressive load.
2461
Case study
ASTM 4280'e göre seramik yol işaretleme kompresyonu ve eğilme dayanımı testi
gereklilik Saudi Ceramics, trafik şeridi tanımlama, omuzlar ve diğer yön işaretlerini göstermek için yansıtıcı olmayan yol işaretleri üretmektedir.
2462
[Page extract]
BS EN ISO 13127
This standard is only to verify that panel-tested closures with minor modifications are still compliant, by applying mechanical tests as more economical than further full panel tests with children and with adults.
2463
[Page extract]
ASTM C273/C273M
This test method is used to determine core shear properties of a sandwich construction material using loading plates bonded to the outer surfaces or skins (facesheets).
2464
[Page extract]
ISBT PTC-00004
These ISBT (International Society of Beverage Technologists) Sport Closure test methods focus on child safety related parameters such as separation forces and choking hazards of closure components.
2465
Case study
Kontrplak tur kesme testi
gereklilik Estonya Kontrplak (Lemeks / Tarmeko grubunun bir parçası), kaplanmamış huş kontrplakının lider üreticisidir; sürdürülebilir iyi yönetilen ormanlardan hasat edilir.
2466
[Page extract]
ASTM D1938
ASTM D1938 covers the determination of the force necessary to propagate a tear in plastic film and thin sheeting by a single-tear method. It rates the tear-propagation resistance of various plastic films and thin sheeting of comparable thickness.
2467
[Page extract]
SAE USCAR-38
This specification defines basic test methods and requirements for ultrasonically welded cable termination type connections.
2468
[Page extract]
ISO 12048
Specifies a method for testing the resistance to compression of complete, filled transport packages and a method for carrying out a stacking test on complete, filled transport packages using the same apparatus.
2469
Case study
ISO 11608-3'e göre önceden doldurulmuş ilaç kartuşlarının kırılma ve sürdürme kuvveti testleri
gereklilik İnsülin gibi ilaçların dağıtımı için mekanik kalem enjektörler, geleneksel şişe ve şırınga yöntemine göre artan bir kabul görmüştür.
2470
[Page extract]
BS EN ISO 1806
This standard specifies a method of determining the mesh breaking force of netting for fishing.
2471
[Page extract]
ASTM D3787
This test method describes the measurement for bursting strength with a ball burst strength tester of textiles or garments that exhibit a high degree of ultimate elongation.
2472
[Page extract]
BS EN 17665
The Directive (EU) 2019/904 “on the reduction of the impact of certain plastic products on the environment” introduces the requirement that plastic caps and lids of single use plastic beverage containers up to 3 l capacity shall remain attached to the c
2473
Case study
Kutu ezilme testi (BCT) ve transit ambalaj sıkıştırma testi
Özelleştirilmiş mühendislik örneği Tüketici ve transit ambalaj endüstrileri için kutular mümkün olduğu kadar hafif olmalı, aynı zamanda içeriklerini muhafaza etme ve koruma sağlamalı ve aynı zamanda hizmette nakliye, taşıma ve istifleme gereksi
2474
Case study
Kapatma torku doğrulaması
gereklilik Müşterinin bir dizi Tornado kapatma tork test cihazı vardı ve üniteleri Mecmesin'e veya onaylı bir laboratuvara iade etmeye gerek kalmadan düzenli validasyon kontrolleri yapmak istedi.