Search results
601
Accessory
Compression Plate - Aluminium, 10 kN, 56 mm, QC-20 fitting
Mec23-56-20-AL
MEC23-56-20-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
56mm diameter.
Fitted with the QC-20mm female connection…
602
Accessory
3- & 4-point Bend Jig, 2.5 kN, Aluminium, QC-20 fitting
Mec238
MEC238 - A small yet fully-configurable 2.5 kN Bend Jig in aluminium.
The main support beam has a bending span up to 150 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single…
603
Accessory
Compression Plate Square, Hardened Steel, 196 x 196 mm, QC-20 or QC-32 fitting
Mec36-196-St
MEC36-196-St :-
Square compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Also supplied with 4 fixing legs to support the weight of the steel plate. Suitable for hard specimens such as…
604
Accessory
Wave jaws for Mec11-20 Scissor Grip, 10 kN, 25 x 100 mm
Mec11-20-BW100
Wave Jaws (25mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves. By using 100 mm width jaws tensile force is reduced to 10kN.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g.…
605
Accessory
Compression Plate Rectangular - Hardened Steel, 396 x 496 mm, QC-20 or QC-32 fitting
Mec36-396x496-St
MEC36-396x496-St :-
Rectangular compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Also supplied with 4 fixing legs to support the weight of the steel plate. Suitable for hard specimens…
606
Accessory
Compression Plate - Hardened Steel, 25 kN, 116 mm, QC-20 fitting
Mec23-116-20-St
MEC23-116-20-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
116mm diameter.
Fitted…
607
Accessory
Wave jaws for Mec11-20 Scissor Grip, 10 kN, 25 x 100 mm
Mec11-20-BW100
Wave Jaws (25mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves. By using 100 mm width jaws tensile force is reduced to 10kN.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g.…
608
Accessory
Charger for touchscreen digital gauges, Australia, USB-PD, 2-pin flat slant
304-060
For use with Mecmesin touchscreen digital force and torque gauges. With 2 flat slanted pins. Commonly used in the UK.
The mains adaptor/charger is a USB-A, USB-C type:
Input: 100-240V~50-60Hz 0.5A (USB-PD)
Output: 5VDC/3A or 9VDC/2.22A
609
Accessory
Compression Plate - Hardened Steel, 25 kN, 196 mm, QC-20 fitting
Mec23-196-20-St
MEC23-196-20-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
196mm diameter.
Fitted…
610
Accessory
U-Form Vice Grip - Double Action, 5 kN, 50 mm opening, QC-20 fitting
Mec240g-S50
MEC 240g-S50 (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the aluminium…
611
Accessory
Compression Plate - Hardened Steel, 25 kN, 296 mm, QC-20 fitting
Mec23-296-20-St
MEC23-296-20-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
296mm diameter.
Fitted…
612
Accessory
Compression Plate - Aluminium, 10 kN, 56 mm, QC-32 fitting
Mec23-56-32-AL
MEC23-56-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
56mm diameter.
Fitted with the QC-32mm female connection…
613
Accessory
Digital Height Scale and Brackets for LCP/S Test Stand
432-162 V01
Digital Height Scale and Brackets for mounting to the lever-operated Manual Test Stand model LCP/S.
The digital display of the height-scale is fixed to the moving crosshead of the test stand so that it's displacement can be monitored. This is often…
614
Accessory
Charger for digital gauges, USA, 110 V/115 V, 2-pin flat
304-006
For use with Mecmesin digital force and torque gauges. 110 Volt with 2 flat pins. Commonly used in USA, Canada, Mexico and Japan.
The mains adaptor/charger is a constant-current type:
Primary circuit: 110V – 50-60Hz
Secondary circuit: 100mA constant…
615
Accessory
Cone Point - 8 mm diameter, 500 N, 10-32 UNF
432-358
A Cone Point probe of Ø 8mm with angle of 60°.
For compression testing of various components or materials up to 500 N.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
616
Accessory
3-Point Bend Jig, 2.5 kN, Aluminium, base plate
432-151
432-151 :- a simple 3-point bend jig supplied as standard with a 5mm radius upper anvil (M6 female thread connection) and two adjustable lower anvils also of 5mm radius. Lower support beam is fitted to a base plate suitable for Mecmesin motorised test…
617
Accessory
Compression Plate Rectangular, Aluminium, 125 x 250 mm, QC-20 or QC-32 fitting
Mec36-125x250-AL
MEC36-125x250-AL:
Rectangular compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
Dimensions: 125 x 250mm.
Fitted with QC-20mm or…
618
Accessory
Adapter, 5 kN, 5-16 UNC to 5-16 UNC, F to F
432-293
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
619
Accessory
Compression Plate Square, Aluminium, 300 x 300 mm, QC-20 or QC-32 fitting
Mec36-300-AL
MEC36-300-AL:
Square compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
Dimensions: 300 x 300mm.
Fitted with QC-20mm or 32mm…
620
Accessory
Adapter, 500N, M6 to M6, F to F
432-334
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
621
Accessory
Eccentric Roller Grip - Smooth roller against rubber base, 1 kN, QC-20 fitting
Mec7-1-SR
MEC7-1-SR Eccentric Cam Grip
Fitted with a smooth-faced 50mm wide roller cam and a rubber-coating on the contact face of the grip body. As a load is applied to a specimen the cam self-tightens, spreading the load evenly. Used for specimens where a…
622
Accessory
Dual Handswitches (locking type) for pneumatic grips
Mec205-3
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-3:
Locking dual handswitches open the jaws of the grip by pushing the lever and remain open after…
623
Accessory
Clevis Grip (small), 500 N, 10-32 UNF
432-403
Small Clevis Grip fitted with female 10-32 UNF thread and supplied with male grub-screw.
Used for securing odd-shaped parts for testing tensile forces below 500N.
624
Accessory
Custom-made Safety Guards and Enclosures
PDVguard
Where the standard safety guard does not fulfil your application requirements, Mecmesin can work with you to design and produce a custom-made safety guard to meet your exact requirements. Suitable for any Mecmesin test stand. Previously-designed guards…
625
Accessory
3- & 4-point Bend Jig, 50 kN, Steel, QC-32 fitting
Mec103-cgr
MEC103 - A compact yet fully-configurable 50 kN Bend Jig in steel.
The main support beam attaches to the base of the test frame and has a bending span up to 120 mm. It can accept a wide selection of interchangeable single-roller or dual-roller anvils to…