Search results
1226
[Page extract]
ASTM D3330
These test methods cover the measurement of the peel adhesion of single and double-sided pressure-sensitive tapes.
1227
Case study
Cosmetics brush pull-out testing
Customised engineering example
Our client is a major cosmetics company using a variety of brushes, make-up wand and applicator designs for all applications and wished to tensile test the integrity of the bristles.
1228
[Page extract]
ANSI/EIA 364-38B
This standard establishes a test method to determine the axial tensile load that can be applied to a mated pair of connectors and the holding effect of a connector cable clamp without causing any detrimental effects upon the cable or connector when subj
1229
[Page extract]
ASTM D3044
This test method covers determination of the shear modulus of wood-based structural panels associated with shear distortion in the plane of the panels. The method is applicable to all types of wood-based structural panels.
1230
Case study
Child resistant closures (CRC) mandrel
Customised engineering example
Child Resistant Closures (CRC) require sufficient vertical force to activate the CR locking mechanism prior to torque being applied.
1231
[Page extract]
ASTM D5467 / D5467M-97
ASTM D5467 is a test method that determines the in-plane compressive properties of polymer matrix composite materials reinforced by high-modulus fibers in a sandwich beam configuration.
1232
[Page extract]
ASTM D3968
This test method covers the measurement of rotational torques of Type IIIA child-resistant closures as a means of monitoring normal functioning of the child-resistant package.
1233
Case study
Plastik film gerginlik testi
gereklilik Müşteri, evcil hayvan gıdaları ve şekerlemelerin ambalajlanması için ambalaj filmi için çift katmanlı bir plastik film kullanır.
1234
[Page extract]
ASTM D6324-11
ASTM D6324 covers the minimum requirements for individually packaged male condoms made from polyurethane. This specification also describes the minimum inspection and quality levels that shall be utilized in referee tests.
1235
[Page extract]
ASTM D575-91
These test methods cover two test procedures for determining the compression-deflection characteristics of rubber compounds other than those usually classified as hard rubber and sponge rubber.
1236
Event
Medical Device Testing: Needle sharpness and syringe actuation testing (with 21 CFR Part 11 compliance)
Hypodermic needles are tested to determine their efficacy in piercing elastomer closures on vials and how their design influences the ease of insertion into the patient's skin, influencing pain and skin trauma.
The smooth and consistent operat
1237
[Page extract]
ISO 13954
ISO 13954 describes a peel test method for determining the decohesive resistance of polyethylene electrofusion socket assemblies for use in the distribution of fluids.
1238
Page
ayarlama
Mecmesin, dünya çapındaki müşterilerimize en yüksek satış sonrası hizmeti sunmayı taahhüt eder. Kuvvet ve tork test ekipmanınızı birinci sınıf durumda tutmak için her zaman distribütör ve bölge ofislerimize güvenebilirsiniz.
1239
Case study
Dış müdahale belirgin kapaklar için tork test cihazı
gereklilik Elopak, şişe kapakları üzerinde kurcalamaya dayanıklı contaların manuel olarak test edilmesi için ekipman gerektirdi, ancak şişe mevcut değildi. Ünite bir dizi farklı ebatta kapsama sahip olmalıdır.
1240
[Page extract]
ISO 21180
ISO 21180 specifies a test method for the determination of the maximum tensile strength of light conveyor belts.
1241
[Page extract]
ASTM D3471
This test method covers the determination of the top-load required to engage lugs on Type IA child-resistant closures.
1242
Case study
Torque to twist out a champagne cork
Requirement
Sibel manufacture natural corks for the wine and spirits industry in the Champagne region of France. They pride themselves on working closely with their clients, taking into account their requirements and expectations for safety.
1243
Case study
Tıbbi cihaz için yarı sert ambalajın soyulma testi
Özel mühendislik örneği Müşterimiz, önceden doldurulmuş şırıngalar içeren steril, yarı rijit, ısıyla şekillendirilmiş plastik bir tepsiyi mühürlemek için kullanılan bir Tyvek® kağıt kapağının soyma kalitesini test etmek zorundaydı.
1244
[Page extract]
ISO 8094
ISO 8094 specifies a test method for determining the adhesion strength of the cover to the core layer. It applies exclusively to steel cord conveyor belts.
1245
[Page extract]
ASTM D3039 / D3039M
ASTM D3039 determines the in-plane tensile properties of polymer matrix composite materials reinforced by high-modulus fibers. A number of calculations can be made including ultimate tensile strength, ultimate tensile strain, tensile chord modulus of
1246
[Page extract]
BS 6319-3
BS 6319-3 is a test method for determining the modulus of elasticity in flexure and flexural strength of resin and polymer/cement compositions for use in construction.
1247
[Page extract]
ASTM D1566
ASTM D1566 is a source of reference for definitions of technical terms used in the rubber industry
Standards can be obtained from appropriate standard authorities.
1248
Case study
Özel şişe kapağı mandrelleri
Özel mühendislik örneği Şişelere uygulanan plastik kapaklar, ince duvarlı ve esnek olabilir, böylece tork testi sırasında bir operatör tarafından tutulduğunda bozulurlar.
1249
[Page extract]
BS EN 12814-4
BS EN 12814-4 is a peel test method for testing welded joints of thermoplastics semi-finished products.
1250
[Page extract]
SAE AIR 1471A
The purpose of this SAE Aerospace Information Report (AIR) is to provide the aerospace propulsion industry with recommended assembly torque limits for commonly used aircraft propulsion system threaded fasteners when a common torque value per fastener si