Search results
526
Accessory
FINAT 1 Peel Jig for 180 degree testing, QC-20
PDV13016-C
FINAT 1 Peel Jig - 180°
A polished steel plate used for affixing pressure-sensitive adhesive tape in accordance with FINAT 1 test method and other international standards.
Fitted with an adaptor having QC-20mm female hole for connection to the base of…
527
Accessory
Compression Plate - Aluminium, 10 kN, 116 mm, QC-20 fitting
Mec23-116-20-AL
MEC23-116-20-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
116mm diameter.
Fitted with QC-20mm female connection…
528
Accessory
FINAT 2 Assisted Pull-Peel Table, 90 degrees, adjustable rails for float glass, QC-20
PDV15031
The FINAT 2 Assisted Pull-Peel table (90° Peel Test) is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of…
529
Accessory
Compression Plate - Aluminium, 10 kN, 196 mm, QC-32 fitting
Mec23-196-32-AL
MEC23-196-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
196mm diameter.
Fitted with the QC-32mm female…
530
Accessory
Compression Plate - Aluminium, 10 kN, 296 mm, QC-32 fitting
Mec23-296-32-AL
MEC23-296-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
296mm diameter.
Fitted with the QC-32mm female…
531
Accessory
Compression Plate - Aluminium, 10 kN, 96 mm, QC-20 fitting
Mec23-96-20-AL
MEC23-96-20-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
96mm diameter.
Fitted with QC-20mm female connection.…
532
Accessory
Compression Plate Rectangular, Aluminium, 125 x 250 mm, QC-20 or QC-32 fitting
Mec36-125x250-AL
MEC36-125x250-AL:
Rectangular compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
Dimensions: 125 x 250mm.
Fitted with QC-20mm or…
533
Accessory
Compression Plate Square, Aluminium, 300 x 300 mm, QC-20 or QC-32 fitting
Mec36-300-AL
MEC36-300-AL:
Square compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
Dimensions: 300 x 300mm.
Fitted with QC-20mm or 32mm…
534
Accessory
Lightweight Vice Grip - Double Action, 100 N, Opening 0-8mm, 10-32 UNF
Mec227
MEC 227 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 100 N in tension with an…
535
Accessory
Lightweight Vice Grip - Double Action, 250 N, Opening 0-8mm, 10-32 UNF
Mec227
MEC 227 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 250 N in tension with an…
536
Accessory
Compression Plate - Hardened Steel, 25 kN, 246 mm, QC-20 fitting
Mec23-246-20-St
MEC23-246-20-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
246mm diameter.
Fitted…
537
Accessory
Compression Plate - Hardened Steel, 50 kN, 344 mm, QC-32 fitting
Mec23-344-32-St
MEC23-344-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
344mm diameter.
Fitted with QC-32mm female connection…
538
Accessory
Rotating Crimp Receptacle (RCR), 1 kN, 10-32 UNF and 5-16 UNC
432-379
Rotating Crimp Receptacle (RCR)
A versatile crimp termination holder that accommodates a wide range of terminal sizes.
The inner slotted ring rotates to fit up to 8 different-sized crimp terminals. The shoulder of the terminal rests against the inner…
539
Accessory
Compression Plate - Hardened Steel, 50 kN, 96 mm, QC-32 fitting
Mec23-96-32-St
MEC23-96-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
96mm diameter.
Fitted with QC-32mm female connection.…
540
Accessory
Spare set of 15 needles for Shotcrete Penetrometer
432-519
Set of 15 Penetration Needles for use with the Mecmesin Shotcrete Pentrometer.
Needles fit into the needle-holder supplied as standard with the Shotcrete Penetrometer
541
Accessory
Charger for digital gauges, Europe, 230 V, 2-pin round
304-004
For use with Mecmesin digital force and torque gauges. 220 Volt with 2 round pins. Commonly used in Europe, South America and Asia.
The mains adaptor/charger is a constant-current type:
Primary circuit: 230V – 50Hz
Secondary circuit: 100mA constant…
542
Accessory
Compression Plate Square, Aluminium, 150 x 150 mm, QC-20 or QC-32 fitting
Mec36-150-AL
MEC36-150-AL:
Square compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
Dimensions: 150 x 150mm.
Fitted with QC-20mm or 32mm…
543
Accessory
Touchscreen Controller for OmniTest Materials Testers
432-846
The Touchscreen Controller has been designed for use with the OmniTest range of Materials Testers as an alternative to a desktop or laptop PC. It provides full PC capability, operating with an embedded version of Windows 10, specifically optimised for and…
544
Accessory
TS torque screwdriver chuck, 3/8"
432-233
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (10mm) opening and is connected to the ‘TS’ screwdriver via a square drive spindle. Used to secure a variety of test specimens for torque applications of 1.5 - 10 N.m
545
Accessory
Compression Plate Square, Aluminium, 350 x 350 mm, QC-20 or QC-32 fitting
Mec36-350-AL
MEC36-350-AL:
Square compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
Dimensions: 350 x 350mm.
Fitted with QC-20mm or 32mm…
546
Accessory
Spring-loaded Pinch Grip with Chain Link, 10 N, QC-20 fitting
MecS205k
A Spring-loaded Pinch Grip designed for small-area contact (10mm x 10mm) to grip a delicate sample.
The sprung-loaded adjustable screw-mechanism allows an opening up to 3.4mm and acts in a pincer motion to secure specimens.
Fitted with a flexible chain…
547
Accessory
Compression Plate, Hardened and Ground, 175 mm, 5-16 UNC
432-446
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
175mm diameter having 5-16 UNC female thread.
548
Accessory
FINAT 1 Peel Jig for 180 degree testing, QC-20
PDV13016-C
FINAT 1 Peel Jig - 180°
A polished steel plate used for affixing pressure-sensitive adhesive tape in accordance with FINAT 1 test method and other international standards.
Fitted with an adaptor having QC-20mm female hole for connection to the base of…
549
Accessory
Compression Plate - Hardened Steel, 25 kN, 196 mm, QC-20 fitting
Mec23-196-20-St
MEC23-196-20-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
196mm diameter.
Fitted…
550
Accessory
Ring Crush Test - Carrier plus Ring Compression Test Insert
PSV21099
A number of test methods and standards employed by various industry bodies call upon specific crush fixtures and
associated accessories to be used in conjunction with a compression tester. The Ring Compression Test Carrier and selected size island Insert…