Syringe pump calibrator

Case study
Pressure sensor calibration is key to the accurate ‘occlusion’ monitoring performance of Cardinal Health medical infusion devices. A precise, repeatable and reliable ‘occlusion’ force calibration tool is essential for our customers, service personnel and production use. Mecmesin have provided expert design advice, equipment samples and test strategies to ensure Cardinal Health have been able to achieve these aims.

Justin Gyer, Instruments Engineering Manager
Cardinal Health

Syringe pump calibrator and syringe pump in use

Shoulder prostheses tensile testing

Case study
I am very pleased with both the service from Mecmesin and the MultiTest 10-x test system and would recommend it for testing many of the aspects of soft tissue repair in orthopaedics. The MultiTest 10-x is easy-to-use and ideal for this application, of testing the fixation of bones and tendons around a prosthesis inserted for fracture of the shoulder.

Mr Keith Borowsky, Orthopaedic Surgeon
University of Brighton Medical School

Shoulder joint prosthesis testing fixtures close-up montage

Tension and compression testing for education in solid mechanics

Case study
The Bioengineering Department at Imperial required a new system for teaching purposes to demonstrate tensile and compressive testing on a range of different materials and custom fixtures. A system was needed that was flexible and easy to use but with a compact form that would fit our available space. The MultiTest 5-xt was an ideal solution and the hardware support from Mecmesin has been excellent.

Dr Dominic Southgate, Senior Teaching Fellow
Imperial College London

MultiTest in the stress lab Imperial college London
"We have been using Mecmesin equipment to perform retention tests on our range of lancet needles for over 8 years. We find the system easy to use for regular in-process checks, and generally reliable with prompt servicing from Mecmesin when required."

John Potter, Quality Systems Engineer
Owen Mumford

Case study
Lancet retention test fixtures on a MultiTest-dV

Syringe pump calibrator

Pressure sensor calibration is key to the accurate ‘occlusion’ monitoring performance of Cardinal Health medical infusion devices. A precise, repeatable and reliable ‘occlusion’ force calibration tool is essential for our customers, service personnel and production use. Mecmesin have provided expert design advice, equipment samples and test strategies to ensure Cardinal Health have been able to achieve these aims.

Justin Gyer, Instruments Engineering Manager
Cardinal Health

Case study
Syringe pump calibrator and syringe pump in use
Having developed a medical device from a blank sheet of paper to a prototype level, we entered into a significant programme of test and development. Previous smaller test programs had used bespoke machinery developed in-house, which although suitable for the task, lacked versatility for the broad range of tests to be carried out, particularly from a programming standpoint. The test programme involved some 40 evaluations, to be conducted in a very condensed timeframe.

Stephen Gilmore, Principal Mechanical Engineer
Crux Product Design

Case study
Bend fixture attached for medical device test with assorted accessories

Shoulder prostheses tensile testing

I am very pleased with both the service from Mecmesin and the MultiTest 10-x test system and would recommend it for testing many of the aspects of soft tissue repair in orthopaedics. The MultiTest 10-x is easy-to-use and ideal for this application, of testing the fixation of bones and tendons around a prosthesis inserted for fracture of the shoulder.

Mr Keith Borowsky, Orthopaedic Surgeon
University of Brighton Medical School

Case study
Shoulder joint prosthesis testing fixtures close-up montage

Tension and compression testing for education in solid mechanics

The Bioengineering Department at Imperial required a new system for teaching purposes to demonstrate tensile and compressive testing on a range of different materials and custom fixtures. A system was needed that was flexible and easy to use but with a compact form that would fit our available space. The MultiTest 5-xt was an ideal solution and the hardware support from Mecmesin has been excellent.

Dr Dominic Southgate, Senior Teaching Fellow
Imperial College London

Case study
MultiTest in the stress lab Imperial college London
We have used Mecmesin equipment for a number of years to perform compression and tension tests on helical springs intended for use in our respiratory drug delivery devices. We now estimate that every second, more than a thousand people rely on a Bespak device to help them breathe and as our testing requirements have grown, so too has our relationship with Mecmesin. Today, we rely upon their advanced test systems to guarantee the quality of our supplied materials.

Peter Haken, Quality Engineer
Bespak

Case study
Medical device spring testing system of force stand and accessories
The performance to standard of our biopsy devices is critical, and our MultiTest systems enable a rapid and accurate assessment of every one. The repeatability of the test cycle, and above all the traceability of each unit under test, gives us the guarantees we need.

Cliff Price, Director Technical Services
Bard Ltd

Case study
Biopsy spring force graph
The Vortex-i system has enabled us to eliminate the variability of results experienced with our previous manually-operated testing systems, allowing accurate and consistent testing of the conformance of our drug delivery systems to our stringent in-house standards.

Stephen Byrne,
Becton Dickinson

Case study
Vortex-i torque tester for drug delivery device testing
The Mecmesin force and torque products are simple to use, reliable and have significantly increased the speed of design development at the company. The programming was found to be intuitive and calculations and data export features particularly useful, especially when setting up programs for non-technical staff.

, Lead Test Engineer, Quality
Adlens

Case study
Adlens Medical spectacles lens adjustment

전문가와 대화

제품에 대한 질문이 있습니까? 지금 기술 영업 엔지니어에게 전화를 요청하십시오.