Category
Part Number
432-384
Description
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 100N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the material is held securely across its entire width during testing.
Maximum specimen width = 50mm,
Maximum thickness = 4mm.
Fitted with 10-32 UNF female hole and supplied with male grub-screw.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the material is held securely across its entire width during testing.
Maximum specimen width = 50mm,
Maximum thickness = 4mm.
Fitted with 10-32 UNF female hole and supplied with male grub-screw.
Images
Datasheet
Fabric Grips
Related Parts
Load Rating
100 N
( 22 lbf )
Fittings
| First thread |
|---|
| M&F / 10-32 UNF |
Weight
81 g
Diagram
432-(384,386) FABRIC GRIP
Nói chuyện với một chuyên gia
Có một câu hỏi về phụ kiện này? Hãy liên hệ và nói chuyện với một trong những Kỹ sư Bán hàng Kỹ thuật của chúng tôi ngay bây giờ ...