Online demonstrations and training available from Mecmesin technical sales engineers


Online test equipment and training demos

 

As more people are working from home to reduce travel, our technical sales engineers can provide online equipment demos or training sessions via web-based video calls.

If possible, send in your own samples and our sales team will be able to present your own products being tested.

Get in touch to discuss your requirements and to arrange an online demo or training session.

Sensors - MultiTest-i & -xt

ILC Loadcells

The ILC range of interchangeable tension and compression loadcells is specially adapted to the MultiTest-i and -xt test systems.

They plug into the frame and their calibration characteristics are immediately recognised by the software of the tester without any input from the operator.

Each loadcell is fitted with a threaded hole or stud for connection to a range of grips to hold your specimens.

To ensure that you have the optimum selection to meet all your tension and compression testing needs, eighteen different loadcells are available. All loadcells measure from zero and cover the range from 2 N right up to 50 kN.

Loadcell capacity, range and accuracy

Each loadcell reads from zero to its full nominal capacity (listed below). Measurement accuracy is an outstanding ±0.1% or ±0.25% of the loadcell capacity.

Mecmesin issued sensor and device calibration certificates

Each sensor is delivered as standard with its own calibration certificate traceable to national standards.
 

Servicing and calibration

Mecmesin service - mobile and at home

Mecmesin also provides annual servicing and torque sensor re-calibration. Talk to one of our engineers or your local national distributor to find out more.

Ask about servicing

 

ILC (2 - 500N)

ILC loadcell force sensor example

Features a loadcell in a housing with a dovetailed fitting to mount on the crosshead of a single- or twin-column test stand.

Compact design saves space and maximises available daylight.

ILC-S (100 N - 5 kN)

ILC-S loadcell force sensor example

Features an S-beam loadcell beneath a housing with a dovetailed fitting to mount on the crosshead of a single- or twin-column test stand.

The S-shape allows a greater contact surface with grips to provide enhanced stability.

ILC-T (10 - 25 kN)

ILC loadcell force sensor example

Features an S-beam loadcell beneath a housing with a through-hole to bolt onto the crosshead of a twin-column test stand.

The S-shape allows a greater contact surface with grips to provide enhanced stability.

ILC-P (20 - 50 kN)

ILC-P loadcell force sensor example

Features a Pancake loadcell beneath a housing with a through-hole to bolt onto the crosshead of a twin-column test stand.

The Pancake design suits higher loads and provides greater overload protection particularly against extraneous loads.