Category
Part Number
Mec9
Description
MEC9 Thin Wire Grip
Designed to hold wires or cords when tensile testing up to 2.5 kN.
The specimen is initially wrapped around a bollard and then secured by manually clamping between either blank or diamond-coated jaws. The Mec9 is supplied with the carrier to hold the jaws .. jaws sold separately.
Fitted with QC-20mm female hole for fixing to the base of a test stand or loadcell.
Designed to hold wires or cords when tensile testing up to 2.5 kN.
The specimen is initially wrapped around a bollard and then secured by manually clamping between either blank or diamond-coated jaws. The Mec9 is supplied with the carrier to hold the jaws .. jaws sold separately.
Fitted with QC-20mm female hole for fixing to the base of a test stand or loadcell.
Images
Datasheet
2.5 kN Screw-action Thin Wire Grips, pair, QC fitting DS-1069-04-L00
Related Parts
Load Rating
2.5 kN
( 550 lbf )
Fittings
| Quick Change |
|---|
| 20 mm |
Weight
380 g
Diagram
Mec9(Ko,2Ko) Pneumatic Wire Grip DIMLESS
Fale com um especialista
Tem alguma pergunta sobre este acessório? Entre em contato e fale com um de nossos engenheiros técnicos de vendas agora ...