Battery terminal weld integrity tensile test

Case study
“The MultiTest 2.5-i is very reliable and we have had no problems since we purchased it. Because it’s failure-free, accurate and has intuitive operation (very user-friendly software) it’s superior to the older control system from another supplier. It’s also worth to mention the after-sales support from ITA, Mecmesin’s Polish Distributor, is quick and efficient.”

Miroslaw Bratus, Production Purchase Coordinator
BMZ Poland Sp.z.o.o.

Battery terminal pull-off tensile testing in production facility

압착 케이블 커넥터 풀 오프 힘

Case study
MultiTest 50-xt를 구입하여 사내에서 테스트 할 수있는 제품의 범위를 확장하고 샘플의 고장 모드에 대한 자세한 정보를 얻을 수있었습니다.

Erica Moore, 테스트 및 EHS 관리자
암 페놀

크림 핑 된 접촉면을 단단히 잡고 조인트의 정확한 강도를 계산합니다.

Cable and pipe pull-out force batch testing system

Case study
"We have made pull-out tests for many years, but with our new equipment, we get the result much quicker and with better accuracy. We can rapidly prepare and perform advanced tests and present the result in a more precise way for both customers and our colleagues, within research and development. The new equipment enables studies of how much force is needed to make a cable or pipe start moving within a seal. The test fixture was developed at CA Mätsystem AB (Mecmesin’s distributor) in Sweden, especially for Roxtec products, in order to enable a thorough testing of all existing Roxtec solutions. All results are stored in a database providing extended knowledge for future product development, as well as, useful information for customers and sales people."

Patrik Cederholm, Tests & Certificates Engineer
Roxtec International AB

Flexible pipe pull-out test frame for specimen location

전기 하네스 터미널 테스트

Case study
우리는 Mecmesin MultiTest 1-x 구매에 매우 만족했으며, 품질 관리, 시스템의 필수 부분이되었으며 툴링을 보정하고 모터 스포츠의 가혹한 환경에서 제품이 가능한 한 신뢰할 수 있는지 확인할 수 있습니다. .

Nigel Barber, 선임 엔지니어
Cyprium 모터 스포츠

BS 5G 178-1
현장에서 전기 하네스 압착 테스트
Mecmesin Multitest-dV 테스터는 자체 테스트의 효율성, 정확성 및 일관성을 개선했습니다. 또한 고객 서비스 / 지원은 전체적으로 매우 도움이되었습니다. 우리는 확실히 Mecmesin을 추천합니다.

Ashley Adlam, 품질 관리자, 품질 관리
Tecni Ltd.

Case study
게이지에 와이어 로프 크림프 테스트 클로즈업

Battery terminal weld integrity tensile test

“The MultiTest 2.5-i is very reliable and we have had no problems since we purchased it. Because it’s failure-free, accurate and has intuitive operation (very user-friendly software) it’s superior to the older control system from another supplier. It’s also worth to mention the after-sales support from ITA, Mecmesin’s Polish Distributor, is quick and efficient.”

Miroslaw Bratus, Production Purchase Coordinator
BMZ Poland Sp.z.o.o.

Case study
Battery terminal pull-off tensile testing in production facility
We manufacture some high specification cable assemblies where reliability is a must. In some cases, lives literally depend on the cables not having failures in situations. By using Mecmesin equipment, we can ensure that our product more than meets the UL standard by at least one and a half times the stated requirement, which is the basis of all tests performed by Telecom Connections Limited, thus increasing reliability, increasing quality and most importantly assuring the end-user that the product will meet the demands intended.

Sean Lathey, Quality/IT Manager
Telecom Connections Ltd

Case study
Cable crimp pull testing systems on-site

압착 케이블 커넥터 풀 오프 힘

MultiTest 50-xt를 구입하여 사내에서 테스트 할 수있는 제품의 범위를 확장하고 샘플의 고장 모드에 대한 자세한 정보를 얻을 수있었습니다.

Erica Moore, 테스트 및 EHS 관리자
암 페놀

Case study
크림 핑 된 접촉면을 단단히 잡고 조인트의 정확한 강도를 계산합니다.

Cable and pipe pull-out force batch testing system

"We have made pull-out tests for many years, but with our new equipment, we get the result much quicker and with better accuracy. We can rapidly prepare and perform advanced tests and present the result in a more precise way for both customers and our colleagues, within research and development. The new equipment enables studies of how much force is needed to make a cable or pipe start moving within a seal. The test fixture was developed at CA Mätsystem AB (Mecmesin’s distributor) in Sweden, especially for Roxtec products, in order to enable a thorough testing of all existing Roxtec solutions. All results are stored in a database providing extended knowledge for future product development, as well as, useful information for customers and sales people."

Patrik Cederholm, Tests & Certificates Engineer
Roxtec International AB

Case study
Flexible pipe pull-out test frame for specimen location

전기 하네스 터미널 테스트

우리는 Mecmesin MultiTest 1-x 구매에 매우 만족했으며, 품질 관리, 시스템의 필수 부분이되었으며 툴링을 보정하고 모터 스포츠의 가혹한 환경에서 제품이 가능한 한 신뢰할 수 있는지 확인할 수 있습니다. .

Nigel Barber, 선임 엔지니어
Cyprium 모터 스포츠

Case study
현장에서 전기 하네스 압착 테스트

전문가와 대화

제품에 대한 질문이 있습니까? 지금 기술 영업 엔지니어에게 전화를 요청하십시오.