Crimp testing cables

Case study
Cable crimp testing on site with BFG digital force gauge and tensile tester
Cable crimp testing on site with BFG digital force gauge and tensile tester
Cable crimp pull testing systems on-site
Cable crimp pull testing systems on-site

Solution

  • Motorised tensile test system and digital gauge
  • Grips designed for crimp testing applications

Benefits

  • Repeatable QC testing at point of manufacture
  • Clear peak load result indication
  • Testing to recognised industry standard
We manufacture some high specification cable assemblies where reliability is a must. In some cases, lives literally depend on the cables not having failures in situations. By using Mecmesin equipment, we can ensure that our product more than meets the UL standard by at least one and a half times the stated requirement, which is the basis of all tests performed by Telecom Connections Limited, thus increasing reliability, increasing quality and most importantly assuring the end-user that the product will meet the demands intended.

Sean Lathey, Quality/IT Manager
Telecom Connections Ltd

Requirement

A leading British cable assembly manufacturer, Telecom Connections Limited, who provide customers in the telecoms and electronics industries with quality cable assemblies and harnesses, wanted to test their wire crimp terminals to make sure they complied with the highest safety standards. The company needed to measure the force required to pull apart the components of a wire crimp connected to a terminal or to another wire. In particular, they wanted to ensure that the crimp terminals complied with the mechanical strength properties in the Underwriters Laboratories® standard UL 486A.

Solution

Mecmesin supplied a VersaTest 2500 N motorised test stand (now superseded by the MultiTest 2.5-dV) and a Basic Force Gauge (BFG). The crimped terminal is attached to a Wedge Grip and held in place with a Cable Cam Grip, which self- tightens as the load is applied, spreading the load evenly and minimising slippage during the test. When the pull test is started, the crosshead on the motorised test stand pulls the crimp until the wire breaks and the maximum force is recorded on the BFG. The test system is used to run regular production checks to confirm that the wire crimp terminals conform to UL486A, ensuring the safety and quality of Telecom Connection's cable assembly products.

Test equipment

  • VersaTest (superseded by the MultiTest-dV series)
  • BFG 500 N
  • Wedge Grip
  • Cable Cam Grip

Wire terminal crimp testing can be performed by a range of testers. Dedicated benchtop testers with manual or motorised pull are portable and quick to use, the motorised units enable testing to stricter standards. Also, digital gauges fitted to motorised tensile testers provide easy-to-use solutions, and software-controlled systems add even more flexibility in procedures and results handling. 

Crimp receptacle with a range of standard gauge apertures measuring pull-out peak loads
Dedicated benchtop pull-tester with receptacle, cam and digital display
Touchscreen gauge on a motorised tensile tester pulling an electrical crimped connector to destruction
Digital force gauge on a motorised tensile tester with a crimp receptacle accessory
솔루션, 가격 및 지원에 대해서는 해당 국가의 Mecmesin 담당자에게 문의하십시오.
 

이 시스템에 대해 궁금한 점이 있습니까? 연락하여 기술 영업 엔지니어에게 문의하십시오.

전문가와 대화