Standards

Featured or equivalent test standards for Mecmesin solutions in this section
The Mecmesin test stand, force gauge and accessories meet all our in-house testing requirements and are quick and easy-to-use. Mecmesin equipment is an important tool in our Product Safety and Quality Assurance System.

Steve Brooker,
Carte Blanche Greetings Ltd

Case study
Plush toy attachment pull-off test accessories and AFG gauge
“Only measuring up to a few Newtons of force with an AFG 2500 N was not enabling us to proceed with our investigation and Mecmesin kindly lent us a more sensitive AFG 10N which instantaneously improved the quality of data we were collecting.”

Alex Radford, Undergraduate Student (Department of Physics)
Durham University

Case study
AFG paired with a force tester
This test system is perfectly suited to our needs, giving us the flexibility we require to perform multiple tests with the certainty of obtaining reliable, accurate results. Undertaking these quality measurements in-house means we are also saving significant costs, as we no longer require the services of external test laboratories.

Jordi Vives-Talló, Engineer
Ultra Magic

Case study
Hot-air balloon fabric tear test and tensile tester
Purchase of the MultiTest 50-xt has allowed us to extend the range of products we can test in-house and obtain more information about the failure mode of the samples.

Erica Moore, Test and EHS Manager
Amphenol

Case study
Touch screen recall of test procedures and clear display of graphical results with the 50 kN xt system
Prior to purchasing the machine, test patches were taken off safety nets before their due date and kept until a batch were sent to our suppliers, which involved parcelling up and visiting the post office to send away for testing. This was time-consuming and expensive. Now we can test as and when required. We chose Mecmesin because they were the most helpful when enquiries were made.

Ian Semple, Director
IPS Safety Netting

Case study
MultiTest 5-xt performing safety net strength tensile test
Upgrading our standard test method with a Mecmesin-i tester was one of the best decisions we made recently. Not only did the new testing machine allow us to utilize the replaced equipment for other projects, but it also improved the reliability of the test, and the reproducibility of test results. Mecmesin’s sales team provided us with all the information needed to make the decision to buy the right testing machine.

Marcin Kujawski, Research and Quality Manager
Concrete Canvas Ltd.

Case study
Sample undergoing flexure testing - geosynthetic cementitious composite material testing
Prior to Mecmesin we would have tied the wire rope in a choke knot to perform the test, but now with the rope grips we are able to test more accurately the performance of the wire rope.

Thomas Reynolds, Testing Manager
Gripple Ltd.

Case study
Wire rope cable failure mode test system comparison wedge and capstan grip combinations
The Bioengineering Department at Imperial required a new system for teaching purposes to demonstrate tensile and compressive testing on a range of different materials and custom fixtures. A system was needed that was flexible and easy to use but with a compact form that would fit our available space. The MultiTest 5-xt was an ideal solution and the hardware support from Mecmesin has been excellent.

Dr Dominic Southgate, Senior Teaching Fellow
Imperial College London

Case study
Bone physical properties test with a strain gauge in the science lab
We use the Mecmesin MultiTest 10-i system to perform regular quality control tests to guarantee the quality of our supplied materials. Mecmesin provided us with a cost-effective solution to our needs and exceptional customer service. I would have no hesitation in recommending them to other companies with materials testing requirements.

Michael Hubbard, Business Quality Manager
British Gaskets Group

Case study
Rubber and plastic materials tension and elongation tests with various grips
We use the MultiTest-x regularly, approximately 40 hours every week. It continues to be reliable and saves us money by enabling us to tests in-house. Mecmesin were able to offer advice regarding fixtures and designed an ideal solution for our testing needs, which remained competitively priced.

Tony Freeman, Director
William Lamb Footwear

Case study
MultiTest and tensile testing fixtures suitable for footwear safety checks
SIPS Frames UK Ltd is one of the UK’s leading independent Structural Insulated Panel System manufacturers, for use in the construction of kit houses by self builders.

Martin Cook, Managing Director
Sips Eco Panels

Case study
MultiTest tensile tester vice grips and pyramid-faced jaws
The Mecmesin penetrometer provides accurate low strength data (up to 1 MPa) as soon as you can start testing. This data can immediately be shared with the Shotcrete crews working underground. The instrument and accessories have brought benefits through easy transportation and has the ability to be used for shotcrete trials, where the samples are shot to be cored at a later date. This has eliminated the need to transport additional samples.

Adam O’Ray, Quality Control Manager
Multicrete Systems Inc.

Case study
Spraying test samples for penetrometer calibration testing

Hablar con un experto

¿Tienes alguna pregunta sobre un producto? Solicite una llamada de uno de nuestros ingenieros técnicos de ventas ahora.