Search results
Standards
Featured or equivalent test standards for Mecmesin solutions in this section
Term Video
Test summary
EN 14477 describes a test method of determining the puncture resistance of flexible packaging materials, including multilayer flexible packaging materials
Test apparatus
Force testing stand capable of fixed speeds of 1, 5, 10, 50 or 100 mm/min.
Compression Load cell with fixture to hold the penetration probe.
0.8 mm diameter penetration probe made of hardened steel with rounded tip of radius of 0.4mm.
Sample holder to secure sample in place during the test.
Software to control stand movement, capture force and displacement data, calculate, store and report results
Preparation
A minimum of 10 specimens shall be taken, evenly spaced across the reel or sheet being tested.
Samples should be conditioned at (23 ± 2)°C and (50 ± 5)% RH for 48 hours before testing. The test shall be carried out at the same conditions
Test method
A pre-conditioned sample is clamped into the sample holder
The compression loadcell reading is zeroed before the probe touches the sample.
The probe is driven through the sample at a constant speed of 1, 5, 10, 50, or 100 mm/min.
The peak force in N is recorded along with the elongation in mm.
For the determination of energy, the integral below the curve of force and elongation shall be calculated.
The mean values and standard deviation of the values shall be calculated.
The test report shall include:
The reference to EN14477 standard
Date and place of testing
Description of the material being tested
Indication of which side of the specimen is being tested
The speed of the probe
Force at break in N. elongation in mm and energy in mJ
Any unusual features noted during the measurement
Any deviation from the method
Thiết bị kiểm tra trực tuyến và trình diễn đào tạo
Vì ngày càng có nhiều người làm việc tại nhà để giảm bớt việc đi lại không cần thiết, các kỹ sư bán hàng kỹ thuật của chúng tôi có thể cung cấp các buổi giới thiệu thiết bị trực tuyến hoặc các buổi đào tạo thông qua cuộc gọi video trên web.
Nếu có thể, hãy gửi mẫu của riêng bạn và đội ngũ bán hàng của chúng tôi sẽ có thể giới thiệu sản phẩm đang được thử nghiệm của chính bạn.
Liên hệ để thảo luận về các yêu cầu của bạn và sắp xếp một buổi giới thiệu hoặc đào tạo trực tuyến.