MultiTest-dV精准力学测试系统

产品测试仪
带AFG的MultiTest-dV

MultiTest-dV系列与我们的先进测力计完美集成,使其成为需要捕获峰值载荷值的独立应用的流行配置。

通过连接扩展其能力VectorPro精简版软件,用于图形显示数据和进行计算,看看测试结果。

带有高级测力计的MultiTest-dV电动测力仪的产品图片,用于Mecmesin的拉伸和压缩测试
材料测试仪
具有ELS的MultiTest-dV

配置了增强型负载传感器VectorPro MT软件和可选的引伸计的MultiTest-dV系列将该电动测力仪转变为基础材料测试仪

这使MultiTest-dV成为QC实验室进行质量保证检查的理想选择,并使其具有进行R&D实验室中材料特性的更深入分析所必需的功能。

带有ElS的MultiTest-dV电动测力仪用于Mecmesin材料测试的产品图片

MultiTest-dV 是一款多功能且易于使用的力学测试仪。

3种型号分别为0.5 kN1 kN2.5 kN量程,适合在生产线或实验室环境进行常规质量控制。

精准力学测试仪与AFG 高级测力计搭配用于常规试样拉伸/压缩测试,或与ELS 增强型负载传感器搭配用于材料模量测试。

Alluris FMT-W40Motorised Pull Tester

The FMT-W40 is a motorised wire-terminal pull tester. It is available in 2 models with a tensile strength capacity up to either 500N (110 lbf) or 1000N (220 lbf).

It is rugged, compact and occupies little space on the benchtop. Specifically designed for ease of use with minimal training, the FMT-W40 is an ideal solution for testing the pull strength of crimped wire terminals right at the point of production.

Its motor drive enables wire terminals to be pull tested at a constant pull speed for greater repeatability of testing. The FMT-W40 features seven different test speeds as required by the relevant testing standards, .

There are three selectable test modes to allow for destructive and non-destructive testing: pull and break; pull and hold; pull, hold and then break.

Suitable for tensile pull strength testing of wire connectors and terminals according to IEC, DIN, EN, BS, UL, SAE, MIL and NASA standards.